| 标准名称 |
英文名称 |
|
代替标准 |
发布日期 |
实施日期 |
| GB/T 25085.1-2024 |
道路车辆 汽车电缆 第1部分：术语和设计指南 |
Road vehicles—Automotive cables—Part 1:Vocabulary and design guidelines |
|
2024-10-26 |
2025-5-1 |
| GB/T 25085.2-2024 |
道路车辆 汽车电缆 第2部分：试验方法 |
GB/T 25085.2—XXXX Road vehicles—Automotive cables—Part 2:Test methods |
|
2024-10-26 |
2025-5-1 |
| GB/T 44852-2024 |
电动摩托车和电动轻便摩托车 与外部电源传导连接的安全要求 |
Electrically propelled mopeds and motorcycles— Safety requirements for conductive connection to an external electric power supply |
|
2024-10-26 |
2025-5-1 |
| GB/T 44774-2024 |
汽车信息安全应急响应管理规范 |
Specifications of emergency response management for vehicle cybersecurity |
|
2024-10-26 |
2024-10-26 |
| GB/T 44778-2024 |
汽车诊断接口信息安全技术要求及试验方法 |
Technical requirements and test methods for cybersecurity of vehicle diagnostic interfaces |
|
2024-10-26 |
2024-10-26 |
| GB/T 44851.3-2024 |
道路车辆 液化天然气（LNG）燃气系统部件 第3部分：止回阀 |
Road vehicles — Liquefied natural gas (LNG) fuel system components —Part 3: Check valve |
|
2024-10-26 |
2025-5-1 |
| GB/T 5054.3-2024 |
道路车辆 多芯连接电缆 第3部分：无屏蔽护套低压电缆的结构、尺寸和标记 |
Road vehicles – Multi-core connecting cables –Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables |
全部代替：GB/T 5054.3-2006 |
2024-10-26 |
2025-5-1 |
| GB/T 5054.4-2024 |
道路车辆 多芯连接电缆 第4部分：螺旋电缆总成的试验方法和要求 |
Road vehicles – Multi-core connecting cables –Part 4: Test methods and requirements for coiled cable assemblies |
全部代替：GB/T 5054.4-2008 |
2024-10-26 |
2025-5-1 |
| GB/T 5054.1-2024 |
道路车辆 多芯连接电缆 第1部分：普通护套电缆的性能要求和试验方法 |
Road vehicles – Multi-core connecting cables – Part 1: Test methods and requirements for basic performance sheathed cables |
全部代替：GB/T 5054.1-2008 |
2024-10-26 |
2025-5-1 |
| GB/T 5054.2-2024 |
道路车辆 多芯连接电缆 第2部分：高性能护套电缆的性能要求和试验方法 |
Road vehicles – Multi-core connecting cables – Part 2: Test methods and requirements for high performance sheathed cables |
全部代替：GB/T 5054.2-2008 |
2024-10-26 |
2025-5-1 |
| GB/T 44433-2024 |
汽车智能限速系统性能要求及试验方法 |
Performance requirements and testing methods for intelligent speed limit system of vehicles |
|
2024-9-29 |
2024-9-29 |
| GB 27887-2024 |
机动车儿童乘员用约束系统 |
Restraining Devices For Child Occupants of power-driven Vehicles |
全部代替：GB 27887—2011 |
2024-9-29 |
2025-7-1 |
| GB/T 44719-2024 |
智能网联汽车 自动驾驶功能道路试验方法及要求 |
Intelligent and connected vehicle—Methods and requirements of road test for automated driving functions |
|
2024-9-29 |
2024-9-29 |
| GB/T 44721-2024 |
智能网联汽车 自动驾驶系统通用技术要求 |
Intelligent and connected vehicles — General technical requirements for automated driving system |
|
2024-9-29 |
2024-9-29 |
| GB 30510-2024 |
重型商用车辆燃料消耗量限值 |
Fuel consumption limits for heavy-duty commercial vehicles |
全部代替：GB 30510-2018 |
2024-9-29 |
2025-7-1 |
| GB 15740-2024 |
汽车防盗装置 |
Protective devices against unauthorized use of motor vehicles |
全部代替：GB 15740-2006 |
2024-9-29 |
2026-1-1 |
| GB/T 44622-2024 |
商用车辆变速器法兰 A型、S型和T型 |
Transmission flanges for commercial vehicles-Types A,S and T |
|
2024-9-29 |
2025-1-1 |
| GB/T 31486-2024 |
电动汽车用动力蓄电池电性能要求及试验方法 |
Electrical performance requirements and test methods for traction battery of electric vehicle |
全部代替：GB/T 31486-2015 |
2024-9-29 |
2025-4-1 |
| GB 4599-2024 |
汽车道路照明装置及系统 |
Road illumination devices and systems for motor vehicles |
全部代替：GB/T 30511-2014,GB/T 30036-2013,GB 4660-2016,GB 4599-2007,GB 25991-2010,GB 21259-2007 |
2024-9-29 |
2025-7-1 |
| GB 5920-2024 |
汽车和挂车光信号装置及系统 |
Light-signalling devices and systems for motor vehicles and their trailers |
全部代替：GB 5920-2019,GB 23255-2019,GB 18409-2013,GB 18408-2015,GB 18099-2013,GB 17509-2008,GB 15235-2007,GB 11554-2008 |
2024-9-29 |
2025-7-1 |
| GB 11564-2024 |
机动车回复反射装置 |
Retro-reflective devices and markings for motor vehicles |
全部代替：GB 11564-2008,GB 19151-2003,GB 23254-2009,GB 25990-2010 |
2024-9-29 |
2025-7-1 |
| GB 17353-2024 |
摩托车和轻便摩托车防盗装置 |
Protective Devices Against Unauthorized Use for Motorcycles and Mopeds |
全部代替：GB 17353-2014 |
2024-9-29 |
2026-1-1 |
| GB 14167-2024 |
机动车乘员用安全带和约束系统安装固定点 |
Safety-belt and restraint systems anchorages for occupants of vehicles |
全部代替：GB 14167-2013 |
2024-9-29 |
2025-7-1 |
| GB 14166-2024 |
机动车乘员用安全带和约束系统 |
Safety-belts and restraint systems for occupants of vehicles |
全部代替：GB 14166-2013 |
2024-9-29 |
2025-7-1 |
| GB/T 44644.1-2024 |
道路车辆 50Ω阻抗射频连接系统接口 第1部分：尺寸和电气要求 |
Road vehicles 50 Ω impedance radio frequency connection system interface - Part 1: Dimensions and electrical requirements |
|
2024-9-29 |
2025-4-1 |
| GB/T 44644.2-2024 |
道路车辆 50Ω阻抗射频连接系统接口 第2部分：测试方法 |
Road vehicles 50 Ω impedance radio frequency connection system interface - Part 2: Test procedures |
|
2024-9-29 |
2025-4-1 |
| GB/T 44287-2024 |
商用车电控气压制动系统（EBS）性能要求及试验方法 |
Performance requirement and testing methods for electronic braking system(EBS)of commercial vehicles |
|
2024-8-23 |
2025-3-1 |
| GB/T 44373-2024 |
智能网联汽车 术语和定义 |
Intelligent and Connected Vehicle-Terms and Definitions |
|
2024-8-23 |
2024-8-23 |
| GB/T 44298-2024 |
智能网联汽车 操纵件、指示器及信号装置的标志 |
Intelligent and connected vehicles — Symbols for controls, indicators and tell-tales |
|
2024-8-23 |
2024-8-23 |
| GB 26134-2024 |
乘用车顶部抗压强度 |
Roof crush resistance of passenger cars |
全部代替：GB 26134-2010 |
2024-8-23 |
2025-7-1 |
| GB/T 44464-2024 |
汽车数据通用要求 |
General requirements of vehicle data |
|
2024-8-23 |
2024-8-23 |
| GB/T 44461.1-2024 |
智能网联汽车 组合驾驶辅助系统技术要求及试验方法 第1部分：单车道行驶控制 |
Intelligent and connected vehicle— Technical requirements and testing methods for combined driver assistance system — Part 1: Single-lane manoeuvre |
|
2024-8-23 |
2024-8-23 |
| GB/T 44461.2-2024 |
智能网联汽车 组合驾驶辅助系统技术要求及试验方法 第2部分：多车道行驶控制 |
Intelligent and connected vehicle — Technical requirements and testing methods for combined driver assistance system — Part 2: Multi-lane maneuver |
|
2024-8-23 |
2024-8-23 |
| GB 44497-2024 |
智能网联汽车 自动驾驶数据记录系统 |
Data storage system for automated driving |
|
2024-8-23 |
2026-1-1 |
| GB 17354-2024 |
乘用车前后端保护装置 |
Front and rear protective devices for passenger cars |
全部代替：GB 17354-1998 |
2024-8-23 |
2025-7-1 |
| GB 20997-2024 |
轻型商用车辆燃料消耗量限值及评价指标 |
Limits and evaluation targets of fuel consumption for light-duty commercial vehicles |
全部代替：GB 20997-2015 |
2024-8-23 |
2026-1-1 |
| GB/T 44410.1-2024 |
道路车辆 压缩天然气（CNG）燃料系统 第1部分：安全要求 |
Road vehicles- Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements |
|
2024-8-23 |
2024-12-1 |
| GB/T 44410.2-2024 |
道路车辆 压缩天然气（CNG）燃料系统 第2部分：试验方法 |
Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods |
|
2024-8-23 |
2024-12-1 |
| GB 11566-2024 |
乘用车外部凸出物 |
External projections for passenger car |
全部代替：GB11566-2009 |
2024-8-23 |
2026-1-1 |
| GB 20182-2024 |
商用车驾驶室外部凸出物 |
The cab of commercial vehicles- External projections |
全部代替：GB 20182-2006 |
2024-8-23 |
2026-1-1 |
| GB 44495-2024 |
汽车整车信息安全技术要求 |
Technical requirements for vehicle cybersecurity |
|
2024-8-23 |
2026-1-1 |
| GB/T 18385-2024 |
纯电动汽车 动力性能 试验方法 |
Battery electric vehicles-Power performance-Test method |
全部代替：GB/T 18385-2005 |
2024-8-23 |
2025-3-1 |
| GB/T 19752-2024 |
混合动力电动汽车 动力性能 试验方法 |
Hybrid electric vehicles—Power performance—Test method |
全部代替：GB/T 19752-2005 |
2024-8-23 |
2025-3-1 |
| GB 44496-2024 |
汽车软件升级通用技术要求 |
General technical requirements for software update of vehicles |
|
2024-8-23 |
2026-1-1 |
| GB/T 44173-2024 |
乘用车车门开启预警系统性能要求及试验方法 |
Performance requirement and testing methods for door open warning system of passenger cars |
|
2024-7-24 |
2024-7-24 |
| GB/T 44174-2024 |
乘用车夜视系统性能要求及试验方法 |
Performance requirements and testing methods for night vision system of passenger cars |
|
2024-7-24 |
2024-7-24 |
| GB/T 44176-2024 |
汽车全景影像监测系统性能要求及试验方法 |
Performance requirements and testing methods for around view monitor system of vehicles |
|
2024-7-24 |
2024-7-24 |
| QC/T 1207-2024 |
燃料电池发动机用空气压缩机 |
Air compressor for fuel cell system |
|
2024-7-5 |
2025-1-1 |
| QC/T 1202-2024 |
乘用车自动变速器用湿式双离合器总成 |
Automatic transmission wet dual clutch assembly for passenger vehicles |
|
2024-7-5 |
2025-1-1 |
| QC/T 985-2024 |
汽车热反射镀膜夹层前风窗玻璃 |
Solar reflective coated laminated automotive windshield |
全部代替：QC/T 984-2014 |
2024-7-5 |
2025-1-1 |
| QC/T 566-2024 |
乘用车外部防护 |
external protection for passenger car |
全部代替：QC/T 566-1999 |
2024-7-5 |
2025-1-1 |
| QC/T 1203-2024 |
汽车空气悬架高度控制阀 |
Levelling valve for vehicle air suspension |
|
2024-7-5 |
2025-1-1 |
| QC/T 946-2024 |
汽车安全带织带 |
Safety belt strap |
全部代替：QC/T 946-2013 |
2024-7-5 |
2025-1-1 |
| QC/T 625-2024 |
汽车用涂镀层和化学处理层 |
Metallic coatings and conversion coatings for automobile |
全部代替：QC/T 625-2013 |
2024-7-5 |
2025-1-1 |
| QC/T 721-2024 |
汽车用非电解锌片涂层 |
Non-electrolytically applied zinc flake coatings for automobile |
全部代替：QC/T 721-2013 |
2024-7-5 |
2025-1-1 |
| QC/T 1206.2-2024 |
电动汽车动力蓄电池热管理系统 第2部分：液冷系统 |
Thermal management system for electric vehicle traction battery Part 2: cooling system |
|
2024-7-5 |
2025-1-1 |
| QC/T 1208-2024 |
燃料电池发动机用氢气循环泵 |
Hydrogen blower for fuel cell system |
|
2024-7-5 |
2025-1-1 |
| QC/T 1204.2-2024 |
纯电动乘用车车载换电系统互换性 第2部分：换电冷却接口 |
Compatibility of on-board battery swap system for battery electric passenger vehicles—Part 2: Battery swap cooling interface |
|
2024-7-5 |
2025-1-1 |
| QC/T 1204.3-2024 |
纯电动乘用车车载换电系统互换性 第3部分：换电机构 |
Compatibility of on-board battery swap system for battery electric passenger vehicles—Part 3: Battery swap mechanism |
|
2024-7-5 |
2025-1-1 |
| QC/T 1204.5-2024 |
纯电动乘用车车载换电系统互换性 第5部分：车辆与电池包的通信 |
Compatibility of on-board battery swap system for battery electric passenger vehicles—Part 5: Communication between electric vehicle and battery pack |
|
2024-7-5 |
2025-1-1 |
| QC/T 1205.4-2024 |
纯电动乘用车换电通用平台 第4部分：电池包与设施的通信 |
Common platform of battery swap for battery electric passenger vehicles—Part 4: Communication between battery pack and infrastructure |
|
2024-7-5 |
2025-1-1 |
| QC/T 242-2024 |
汽车车轮静不平衡量要求及检测方法 |
Static unbalance requirements and test methods of vehicle wheels |
全部代替：QC/T 242-2014 |
2024-7-5 |
2025-1-1 |
| QC/T 241-2024 |
汽车无内胎车轮密封性检测方法 |
Test method for sealing of tubeless wheels of automobiles |
全部代替：QC/T 241-2011 |
2024-7-5 |
2025-1-1 |
| GB/T 44156-2024 |
乘用车后方交通穿行提示系统性能要求及试验方法 |
Performance requirement and testing methods for rear cross traffic alert system of passenger cars |
|
2024-6-29 |
2024-6-29 |
| GB/T 44153-2024 |
机动车玻璃通用技术要求 |
General technical requirements for glazing materials used in power-driven vehicles |
|
2024-6-29 |
2025-1-1 |
| GB/T 17692-2024 |
汽车发动机及驱动电机净功率测试方法 |
Measurement methods of net power for automotive engines and electric drive trains |
全部代替：GB/T 17692-1999 |
2024-6-29 |
2025-1-1 |
| GB 24406-2024 |
专用校车学生座椅及其车辆固定件的强度 |
The strength of student seat and their anchorages of special school bus |
全部代替：GB 24406-2012 |
2024-6-25 |
2025-1-1 |
| GB/T 44038-2024 |
车辆倒车提示音要求及试验方法 |
Requirements and testing methods of warning sound for vehicle reversing |
|
2024-5-28 |
2025-1-1 |
| GB/T 18410-2024 |
车辆识别代号条码标签 |
Vehicle Identification Number Bar-code Label |
全部代替：GB/T 18410-2001 |
2024-5-28 |
2024-12-1 |
| GB/T 44131-2024 |
燃料电池电动汽车碰撞后安全要求 |
Post-crash safety requirement for fuel cell electric vehicle |
|
2024-5-28 |
2024-5-28 |
| GB/T 44124-2024 |
道路车辆 道路负载测定 |
Road load determination of road vehicles |
|
2024-5-28 |
2024-9-1 |
| GB/T 44128-2024 |
道路车辆 重型商用列车气压制动系统制动开始压力 滚筒制动试验台测量方法 |
Road vehicles — Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems — Test with roller brake tester |
|
2024-5-28 |
2024-9-1 |
| GB/T 44126.2-2024 |
道路车辆 最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法 第2部分：气顶液和纯液压制动系统 |
Road vehicles — Test of braking systems on vehicles with a maximum authorized total mass of over 3,t using a roller brake tester —Part 2 Air over hydraulic and purely hydraulic braking |
|
2024-5-28 |
2024-9-1 |
| GB/T 44041-2024 |
道路车辆 40毫米牵引杆挂环 互换性 |
Road vehicles - 40 mm drawbar eye - Interchangeability |
|
2024-5-28 |
2024-12-1 |
| GB/T 44044-2024 |
道路车辆 3.5t以下挂车 支撑轮和升降装置要求 |
Road vehicles — Trailers up to 3.5t — Requirements for jockey vehicle wheels and jacking systems |
|
2024-5-28 |
2024-9-1 |
| GB/T 13880-2024 |
道路车辆 牵引座 互换性 |
Road vehicles - Fifth wheels - Interchangeability |
全部代替：GB/T 13880-2007 |
2024-5-28 |
2024-12-1 |
| GB/T 19514-2024 |
乘用车行李舱容积的测量方法 |
Method of measuring volume for passenger-car luggage compartment |
全部代替：GB/T 19514-2004 |
2024-5-28 |
2024-9-1 |
| GB/T 12674-2024 |
汽车、挂车及汽车列车质量参数测量方法 |
Motor vehicles，trailers and combination vehicles mass parametes measuremen method |
全部代替：GB/T 12674-1990 |
2024-5-28 |
2024-9-1 |
| GB/T 44040-2024 |
重型汽车多工况行驶车外噪声测量方法 |
Measurement methods for noise emitted by heavy-duty vehicles in multiple driving mode conditions |
|
2024-5-28 |
2025-1-1 |
| GB/T 18297-2024 |
汽车发动机性能试验方法 |
Performance test code for road vehicle engines |
全部代替：GB/T 18297-2001 |
2024-5-28 |
2024-12-1 |
| GB/T 19055-2024 |
汽车发动机可靠性试验方法 |
Reliability test methods for vehuicle engines |
全部代替：GB/T 19055-2003 |
2024-5-28 |
2024-12-1 |
| GB/T 18488-2024 |
电动汽车用驱动电机系统 |
Drive motor system for electric vehicles |
全部代替：GB/T 18488.1-2015,GB/T 18488.2-2015 |
2024-5-28 |
2024-5-28 |
| GB/T 44083.2-2024 |
道路车辆 儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则 第2部分：用车辆安全带固定儿童约束系统 |
Road vehicles - Methods and rules for the evaluation of serviceability of child restraint systems and their compatibility with vehicle anchorages - Part 2: Securing child restraint systems with vehicle mounting belts |
|
2024-5-28 |
2024-12-1 |
| GB/T 44083.3-2024 |
道路车辆 儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则 第3部分：儿童约束系统中儿童乘员的搭乘及日常维护 |
Road vehicles - Methods and rules for the evaluation of the serviceability of child restraint systems and their mounting with vehicle anchorages - Part 3: Ride and daily maintenance of child occupants in child restraint systems |
|
2024-5-28 |
2024-12-1 |
| GB/T 44083.4-2024 |
道路车辆 儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则 第4部分：增高椅和增高垫 |
Road vehicles - Methods and rules for the evaluation of the serviceability of child restraint systems and their mounting with vehicle anchorages - Part 4: Convenience of use of heightening pad |
|
2024-5-28 |
2024-12-1 |
| GB/T 44084-2024 |
重型商用车转向中心区摇摆试验和过渡试验方法 |
Heavy commercial vehicles — Open-loop test methods for the quantification of on-centre handling — Weave test and transition test |
|
2024-5-28 |
2024-9-1 |
| GB/T 44043-2024 |
乘用车 自由转向特性 转向释放开环试验方法 |
Passenger Car Free-steer Behaviour—Steering Release Open-Loop Test Method |
|
2024-5-28 |
2024-12-1 |
| GB/Z 44116-2024 |
燃料电池发动机及关键部件耐久性试验方法 |
Test methods for durability of fuel cell engine and its key components |
|
2024-5-28 |
2024-5-28 |
| GB/T 44132-2024 |
车用动力电池回收利用 通用要求 |
Recovery of traction battery used in electric vehicle—General requirements |
|
2024-5-28 |
2024-5-28 |
| GB/T 44123-2024 |
汽车液压制动系统试验方法 |
Testing methods of hydraulic braking systems for Motor vehicles |
|
2024-5-28 |
2024-9-1 |
| GB 24550-2024 |
汽车对行人的碰撞保护 |
The protection of motor vehicle for pedestrians in the event of a collision |
全部代替：GB/T 24550-2009 |
2024-5-28 |
2025-1-1 |
| GB/T 44082-2024 |
道路车辆 汽车列车多车辆间连接装置 强度要求 |
Road vehicles – Coupling equipment between vehicle in multiple vehicle combinations strength requirements and eyes for rigid drawbars – Strength tests |
|
2024-5-28 |
2024-9-1 |
| GB/T 44039.1-2024 |
道路车辆 牵引杆连接器和牵引杆挂环 第1部分：普通货物中置轴挂车强度试验 |
Road vehicles—Drawbar couplings and eyes for rigid drawbars—Part 1:Strength tests for general cargo centre-axle trailers |
|
2024-5-28 |
2024-9-1 |
| GB/T 44039.2-2024 |
道路车辆 牵引杆连接器和牵引杆挂环 第2部分：特殊车辆强度试验 |
Commercial road vehicles — Drawbar couplings and eyes for rigid drawbars — Part 2: Strength tests for special applications |
|
2024-5-28 |
2024-9-1 |
| QC/T 857-2023 |
焊接螺柱 |
Weld studs |
全部代替：QC/T 857-2011 |
2023-12-29 |
2024-7-1 |
| QC/T 1200-2023 |
带充电机的电动汽车传导充电用电缆组件 |
Cable assembly with charger of conductive charging for electric vehicles |
|
2023-12-29 |
2024-7-1 |
| QC/T 1198-2023 |
带功能盒的电动汽车传导充电用电缆组件 |
Cable assembly with function box of conductive charging for electric vehicles |
|
2023-12-29 |
2024-7-1 |
| QC/T 1199-2023 |
电动汽车传导充电用集成式交流供电标准插座 |
Integrated AC standard socket-outlet of conductive charging for electric vehicles |
|
2023-12-29 |
2024-7-1 |
| QC/T 350-2023 |
塑料开尾销钉 |
Plastic split dowel |
全部代替：QC/T 350-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 346-2023 |
塑料堵塞 |
Plastic Plug |
全部代替：QC/T 346-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 638-2023 |
密封垫圈 |
Sealing washer |
全部代替：QC/T 638-2000 |
2023-12-29 |
2024-7-1 |
| QC/T 388-2023 |
碗形塞片 |
Bowl type expansion plug |
全部代替：QC/T 388-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 357-2023 |
带导向轴车轮螺母 |
Wheel nuts with guide shaft |
全部代替：QC/T 357-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 356-2023 |
球面车轮螺母 |
Wheel nuts with spherical seat |
全部代替：QC/T 356-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 355-2023 |
锥面车轮螺母 |
Wheel nuts with conical seat |
全部代替：QC/T 355-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 354-2023 |
法兰面车轮螺母与球面垫圈 |
Wheel nuts with flange |
全部代替：QC/T 354-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 600-2023 |
六角头螺栓和锥形弹性垫圈的组合件 |
hexagon bolt with conical washer assembly |
全部代替：QC/T 600-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 343-2023 |
螺母保护帽 |
Protective cap for nut |
全部代替：QC/T 343-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 620-2023 |
A型蜗杆传动式软管环箍 |
Hose clamp with worm drive A type |
全部代替：QC/T 620-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 619-2023 |
B型和C型蜗杆传动式软管环箍 |
Hose clamp worm with drive B type and C type |
全部代替：QC/T 619-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 291-2023 |
汽车机械式分动器总成性能要求和台架试验方法 |
Performance requirements and bench test method for automotive mechanical transfer case |
全部代替：QC/T 291-1999,QC/T 292-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 465-2023 |
汽车机械式变速器分类的术语及定义 |
Automotive mechanical transmission terminology and definition |
全部代替：QC/T 465-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 513-2023 |
商用车辆前轴总成 |
Front axle assembly for commercial vehicles |
全部代替：QC/T 513-1999,QC/T 494-1999,QC/T 483-1999 |
2023-12-29 |
2024-7-1 |
| QC/T 1091-2023 |
客车空气净化装置 |
Air Cleaner for Passenger coach |
全部代替：QC/T 1091-2017 |
2023-12-29 |
2024-7-1 |
| QC/T 1030-2023 |
客车外推式应急窗 |
Bus push-out emergency window |
全部代替：QC/T 1030-2016 |
2023-12-29 |
2024-7-1 |
| QC/T 1020-2023 |
汽车驱动轴总成 |
Drive shaft assembly for automobiles |
全部代替：QC/T 1020-2015 |
2023-12-29 |
2024-7-1 |
| QC/T 998-2023 |
汽车空调滤清器 |
Cabin air filter for qutomobiles |
全部代替：QC/T 998-2015 部分代替：QC/T 998-2015 部分代完：QC/T 998-2015 |
2023-12-29 |
2024-7-1 |
| QC/T 922-2023 |
汽车用空气滤清器滤芯 |
Air filter element for automobiles |
全部代替：QC/T 922-2013 部分代替：QC/T 922-2013 部分代完：QC/T 922-2013 |
2023-12-29 |
2024-7-1 |
| QC/T 1201.2-2023 |
纯电动商用车车载换电系统互换性 第 2 部分：换电冷却接口 |
Compatibility of on-board battery swap system for battery electric commercial vehicles—Part 2: Battery swap cooling interface |
|
2023-12-29 |
2023-12-29 |
| QC/T 1201.3-2023 |
纯电动商用车车载换电系统互换性 第 3 部分：换电机构 |
Compatibility of on-board battery swap system for battery electric commercial vehicles—Part 3: Battery swap mechanism |
|
2023-12-29 |
2023-12-29 |
| QC/T 1201.4-2023 |
纯电动商用车车载换电系统互换性 第 4 部分：换电电池系统 |
Compatibility of on-board battery swap system for battery electric commercial vehicles—Part 4: Swappable battery system |
|
2023-12-29 |
2023-12-29 |
| QC/T 1201.1-2023 |
纯电动商用车车载换电系统互换性 第 1 部分：换电电气接口 |
Interchangeability of On Board Power Exchange System for electric commercial vehicle |
|
2023-12-29 |
2023-12-29 |
| QC/T 1201.5-2023 |
纯电动商用车车载换电系统互换性 第 5 部分：车辆与电池系统的通信 |
Compatibility of on-board battery swap system for battery electric commercial vehicles—Part 5: Communication between the vehicle and the battery system |
|
2023-12-29 |
2023-12-29 |
| GB/T 43407.2-2023 |
道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第2部分:视野 |
Road vehicles — Ergonomic requirements for the driver's compartment in low-floor line-service buses—Part 2:Visibility |
|
2023-12-28 |
2024-4-1 |
| GB/T 43407.4-2023 |
道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第4部分：驾驶区环境 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service busesPart 4: Cabin environment |
|
2023-12-28 |
2024-4-1 |
| GB/T 34425-2023 |
燃料电池电动汽车加氢枪 |
Fuel cell electric vehicles-Hydrogen refuelling nozzl |
全部代替：GB/T 34425-2017 |
2023-12-28 |
2024-7-1 |
| GB/T 26991-2023 |
燃料电池电动汽车动力性能试验方法 |
Power Performance test methods for fuel cell engines |
全部代替：GB/T 26991-2011 |
2023-12-28 |
2024-7-1 |
| GB/T 12428-2023 |
客车装载质量计算方法 |
landen mass calculating method for bus |
全部代替：GB/T 12428-2005 |
2023-11-27 |
2024-6-1 |
| GB/T 43398-2023 |
乘用车行李移动对乘员伤害的安全要求 |
Prevent the damage of moving cargo to passengers |
|
2023-11-27 |
2024-6-1 |
| GB/T 43252-2023 |
燃料电池电动汽车能量消耗量及续驶里程试验方法 |
Test methods of energy consumption and driving range for fuel cell Electric vehicles |
|
2023-11-27 |
2023-11-27 |
| GB/T 43255-2023 |
燃料电池电动汽车低温冷起动性能试验方法 |
Test methods for cold starting performance of fuel cell vehicles under sub-zero conditions |
|
2023-11-27 |
2023-11-27 |
| GB/T 28957.1-2023 |
道路车辆 用于滤清器评定的试验粉尘 第1部分：氧化硅试验粉尘 |
Road vehicles -Test dust for filter evaluation Part 1:Silicon dioxide test dust |
全部代替：GB/T 28957.1-2012 部分代替：GB/T 28957.1-2012 部分代完：GB/T 28957.1-2012 |
2023-11-27 |
2024-8-1 |
| GB/T 43404-2023 |
轻型汽车道路负载 底盘测功机再现 |
Road load reproduction on chassis dynamometer for light-duty vehicles |
|
2023-11-27 |
2024-6-1 |
| GB/T 43299-2023 |
机动车玻璃电加热性能试验方法 |
Test methods of electrical heating properties for glazing materials used in power-driven vehicles |
|
2023-11-27 |
2024-6-1 |
| GB/T 43407.3-2023 |
道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第3部分：信息装置和控制器 |
Road vehicles—Ergonomic requirements for the driver's compartment in low-floor line-service buses—Part 3:Information devices and controls |
|
2023-11-27 |
2024-3-1 |
| GB/T 43402-2023 |
乘用车 驾驶员手控制区域 |
Passenger cars Driver hand control reach |
|
2023-11-27 |
2024-3-1 |
| GB/T 43258.2-2023 |
道路车辆 基于因特网协议的诊断通信（DoIP） 第2部分：传输协议与网络层服务 |
Road vehicles — Diagnostic communication over Internet Protocol-Part 2: Transport protocol and network layer |
|
2023-11-27 |
2023-11-27 |
| GB/T 43258.3-2023 |
道路车辆 基于因特网协议的诊断通信（DoIP） 第3部分：基于IEEE 802.3有线车辆接口 |
Road vehicles — Diagnostic communication over Internet Protocol- Part 3: Wired vehicle interface based on IEEE 802.3 |
|
2023-11-27 |
2023-11-27 |
| GB/T 43258.4-2023 |
道路车辆 基于因特网协议的诊断通信 (DoIP) 第4部分: 基于以太网的高速数据链路连接器 |
Road vehicles — Diagnostic communication over Internet Protocol-Part 4: Ethernet-Based high-speed data link |
|
2023-11-27 |
2023-11-27 |
| GB/T 43407.1-2023 |
道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第1部分：总体描述和基本要求 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses— Part1:General description, basic requirements |
|
2023-11-27 |
2024-3-1 |
| GB/T 43267-2023 |
道路车辆 预期功能安全 |
Road Vehicles-Safety of the Intended Functioanlity |
|
2023-11-27 |
2023-11-27 |
| GB/T 43254-2023 |
电动汽车用驱动电机系统功能安全要求及试验方法 |
Functional safety requirements and testing methods for drive motor system of electric vehicles |
|
2023-11-27 |
2024-6-1 |
| GB/T 43253.1-2023 |
道路车辆 功能安全审核及评估方法 第1部分：通用要求 |
Road Vehicles-Functional Safety Audit and Assessment Method-Part 1: General requirements |
|
2023-11-27 |
2023-11-27 |
| GB/T 43253.2-2023 |
道路车辆 功能安全审核及评估方法 第2部分：概念阶段和系统层面 |
Road Vehicles-Functional Safety Audit and Assessment Method-Part 2:Concept phase and System level |
|
2023-11-27 |
2023-11-27 |
| GB/T 43253.3-2023 |
道路车辆 功能安全审核及评估方法 第3部分：软件层面 |
Road vehicles-Functional Safety Audit and Assessment Method-Part3: Software Level |
|
2023-11-27 |
2023-11-27 |
| GB/T 43253.4-2023 |
道路车辆 功能安全审核及评估方法 第4部分：硬件层面 |
Road Vehicles-Functional Safety Audit and Assessment Method-Part 4：Hardware Level |
|
2023-11-27 |
2023-11-27 |
| GB/T 26990-2023 |
燃料电池电动汽车 车载氢系统技术条件 |
Fuel cell electric vehicles Onboard hydrogen system specification |
全部代替：GB/T 26990-2011，GB/T 29126-2012 |
2023-11-27 |
2023-11-27 |
| GB/T 12538-2023 |
道路车辆 质心位置的测定 |
Road vehicles — Determination of centre of gravity |
全部代替：GB/T 12538-2003,GB/T 12538-1990 |
2023-11-27 |
2024-6-1 |
| GB/T 43405-2023 |
封闭式货车 货物隔离装置及系固点技术要求和试验方法 |
Delivery van-partitioning system and lashing point technical requirements and test methods |
|
2023-11-27 |
2024-3-1 |
| GB/T 17867-2023 |
汽车手操纵件、指示器及信号装置的位置 |
Location of hand controls, indicators and tell-tales in motor vehicles |
全部代替：GB/T 17867-1999 |
2023-11-27 |
2024-3-1 |
| GB/T 43399-2023 |
道路车辆 液化天然气（LNG）加注连接器 3.1MPa连接器 |
Road vehicles — Liquefied natural gas (LNG) refuelling connector — 3.1 MPa connector |
|
2023-11-27 |
2024-3-1 |
| GB/T 43408-2023 |
道路车辆 压缩天然气（CNG）加气连接器 |
Road vehicles — Compressed natural gas (CNG) refuelling connector |
|
2023-11-27 |
2024-3-1 |
| GB/T 43403-2023 |
道路车辆 3.5t以下挂车 连接球用焊接牵引支架疲劳试验后的质量检查 |
Road vehicles — Trailers up to 3,5T — Control of welded towing brackets for coupling ball after fatigue testing |
|
2023-11-27 |
2024-3-1 |
| GB/T 43401.1-2023 |
道路车辆 旅居挂车和轻型挂车稳定装置 第1部分：集成式 |
Road vehicles - Stabilizing devices for caravans and light trailers - Part 1: Integrated stabilizers |
|
2023-11-27 |
2024-3-1 |
| GB/T 43400-2023 |
道路车辆 3.5t以下挂车 钢制牵引杆机械强度计算 |
Road vehicles - Trailers up to 3.5 t - Calculation of the mechanical strength of steel drawbars |
|
2023-11-27 |
2024-3-1 |
| GB/T 43382-2023 |
道路车辆手控装置常规运动方向 |
Road Vehicle-Direction of motion stereotypes for automotive hand controls |
|
2023-11-27 |
2024-3-1 |
| GB/T 31467-2023 |
电动汽车用锂离子动力电池包和系统电性能试验方法 |
Electrical performance test methods for Lithium-ion traction battery pack and system of electric vehicles |
全部代替：GB/T 31467.1-2015,GB/T 31467.2-2015 |
2023-11-27 |
2023-11-27 |
| GB/T 43332-2023 |
电动汽车传导充放电安全要求 |
Safety requirements of conductive charging and discharging for electric vehicles |
|
2023-11-27 |
2023-11-27 |
| GB/T 43250-2023 |
汽车用主动红外探测系统 |
Active infrared detector system for vehicle |
|
2023-11-27 |
2023-11-27 |
| GB/T 43249-2023 |
汽车用被动红外探测系统 |
Passive infrared detector system for vehicle |
|
2023-11-27 |
2023-11-27 |
| GB/T 19515-2023 |
道路车辆 可再利用率和可回收利用率 要求及计算方法 |
Road vehicles—Recyclability and recoverability—requirement and calculation method |
全部代替：GB/T 19515-2015 部分代替：GB/T 19515-2015 |
2023-11-27 |
2024-3-1 |
| GB/T 26777-2023 |
挂车支承装置 |
Semi-trailer landing gears |
全部代替：GB/T 26777-2011 |
2023-11-27 |
2024-6-1 |
| GB 22757.1-2023 |
轻型汽车能源消耗量标识 第1部分：汽油和柴油汽车 |
Energy consumption label for light-duty vehiclesPart 1: For gasoline and diesel vehicles |
全部代替：GB 22757.1-2017 |
2023-9-8 |
2024-7-1 |
| GB 22757.2-2023 |
轻型汽车能源消耗量标识 第2部分：可外接充电式混合动力电动汽车和纯电动汽车 |
Energy consumption label for light-duty vehicles Part 2: For off-vehicle-chargeable hybrid electric vehicles and battery electric vehicles |
全部代替：GB 22757.2-2017 |
2023-9-8 |
2024-7-1 |
| GB 29753-2023 |
道路运输 易腐食品与生物制品 冷藏车安全要求及试验方法 |
Road transportation— Perishable foodstuffs and biological product — Safety requirement and test methods of refrigerated vehicle |
全部代替：GB 29753-2013 |
2023-9-8 |
2024-1-1 |
| GB 13057-2023 |
客车座椅及其车辆固定件的强度 |
The strength of the seats and their anchorages of passencger vehicles |
全部代替：GB 13057-2014 |
2023-9-8 |
2024-1-1 |
| GB/T 33014.11-2023 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第11部分：混响室法 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 11: Reverberation chamber |
|
2023-9-7 |
2024-4-1 |
| GB/T 43192.1-2023 |
道路车辆 牵引车和挂车电气连接的数字信息交互 第1部分:物理层和数据链路层 |
Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1： Physical and data-link layer |
|
2023-9-7 |
2024-4-1 |
| GB/T 38698.2-2023 |
车用动力电池回收利用 管理规范 第2部分：回收服务网点 |
Recycling of traction battery used in electric vehicle——Management specification（Part2）—— Specifications for construction of recycling service network |
|
2023-9-7 |
2023-9-7 |
| GB/T 20234.1-2023 |
电动汽车传导充电用连接装置 第1部分：通用要求 |
Connection set for conductive charging of electric vehicles-Part 1: General requirements |
全部代替：GB/T 20234.1-2015 |
2023-9-7 |
2023-9-7 |
| GB/T 43187-2023 |
车载无线通信终端 |
Vehicle-mounted wireless communication terminal |
|
2023-9-7 |
2023-9-7 |
| GB/T 20234.3-2023 |
电动汽车传导充电用连接装置 第3部分：直流充电接口 |
Connection set for conductive charging of electric vehicles—Part 3: DC charging coupler |
全部代替：GB/T 20234.3-2015 |
2023-9-7 |
2023-9-7 |
| GB/T 22551-2023 |
旅居车辆 居住要求 |
Leisure accommodation vehicles - Habitation requirements |
全部代替：GB/T 22551-2008 |
2023-5-23 |
2023-12-1 |
| GB/T 22550-2023 |
旅居车辆 术语 |
Leisure accommodation vehicles －Terminology |
全部代替：GB/T 22550-2008,GB/T 22552-2008 |
2023-5-23 |
2023-12-1 |
| GB/T 26778-2023 |
汽车列车性能要求及试验方法 |
Combination of vehicle performance requirements and test methods |
全部代替：GB/T 26778-2011 |
2023-5-23 |
2023-12-1 |
| GB/T 12541-2023 |
汽车通过性试验方法 |
Motor vehicles passing capacity test method |
全部代替：GB/T 12541-1990 |
2023-5-23 |
2023-12-1 |
| GB/T 42691.1-2023 |
道路车辆 局域互联网络（LIN） 第1部分：一般信息和使用案例定义 |
Road vehicles — Local Interconnect Network (LIN) —Part 1:General information and use case definition |
|
2023-5-23 |
2023-12-1 |
| GB/T 42691.2-2023 |
道路车辆 局域互联网络（LIN） 第2部分：传输层协议和网络层服务 |
Road vehicles — Local Interconnect Network (LIN) —Part2:Transport protocol and network layer services |
|
2023-5-23 |
2023-12-1 |
| GB/T 42691.3-2023 |
道路车辆 局域互联网络（LIN） 第3部分：协议规范 |
Road vehicles — Local Interconnect Network (LIN) —Part 3:Protocol specification |
|
2023-5-23 |
2023-12-1 |
| GB/T 42691.4-2023 |
道路车辆 局域互联网络（LIN） 第4部分：12V/24V电气物理层规范 |
Road vehicles — Local Interconnect Network (LIN) —Part 4:Electrical physical layer (EPL) specification 12 V/24 V |
|
2023-5-23 |
2023-12-1 |
| GB/T 42691.5-2023 |
道路车辆 局域互联网络（LIN） 第5部分：应用程序接口 |
Road vehicles — Local Interconnect Network (LIN) —Part 5:Application programmers interface (API) |
|
2023-5-23 |
2023-12-1 |
| GB/T 42691.6-2023 |
道路车辆 局域互联网络（LIN） 第6部分：协议一致性测试规范 |
Road vehicles-Local Internet Network (LIN)-Part6:LIN Protocol conformance test specification |
|
2023-5-23 |
2023-12-1 |
| GB/T 42691.7-2023 |
道路车辆 局域互联网络（LIN） 第7部分：电气物理层（EPL）一致性测试规范 |
Road vehicles — Local Interconnect Network (LIN) —Part 7：Electrical Physical Layer (EPL) conformance test specification |
|
2023-5-23 |
2023-12-1 |
| GB/T 42691.8-2023 |
道路车辆 局域互联网络（LIN） 第8部分：电气物理层（EPL）规范：直流电源线上的局域互联网络（DC-LIN） |
Road vehicles—Local Interconnect Network(LIN)—Part 8: Electrical physical layer(EPL) specification: LIN over DC powerline(DC-LIN) |
|
2023-5-23 |
2023-12-1 |
| QC/T 1193-2023 |
汽车天线放大器 |
Automotive antenna amplifier |
|
2023-5-22 |
2023-11-1 |
| QC/T 1067.4-2023 |
汽车电线束和电气设备用连接器 第4部分：设备连接器（插头）的型式和尺寸 |
Connector used in automobile wire harness and electrical device Part4：Type and dimension of device connector(plug) |
|
2023-5-22 |
2023-11-1 |
| QC/T 1067.5-2023 |
汽车电线束和电气设备用连接器 第5部分：设备连接器（插座）的型式和尺寸 |
Connector used in automobile wire harness and electrical device Part5：Type and dimension of device connector(socket) |
|
2023-5-22 |
2023-11-1 |
| QC/T 1191-2023 |
乘用车转向器齿条 |
Methods of performance testing for passenger verhicle steering rack |
|
2023-5-22 |
2023-11-1 |
| QC/T 29090-2023 |
汽车用刮水电动机 |
Wiper motor for vehicle |
全部代替：QC/T 29090-1992 |
2023-5-22 |
2023-11-1 |
| QC/T 1192-2023 |
汽车用环境光传感器 |
Ambient Light Sensor for Vehicle |
|
2023-5-22 |
2023-11-1 |
| QC/T 1195-2023 |
汽车用空气流量传感器 |
Mass air flow sensor for vehicle motor |
|
2023-5-22 |
2023-11-1 |
| QC/T 1194-2023 |
汽车雨量传感器 |
Automobile rainfall sensor |
|
2023-5-22 |
2023-11-1 |
| QC/T 739-2023 |
油田专用车辆通用技术条件 |
General specification for special vehicles in the oil field |
全部代替：QC/T 739-2005 |
2023-5-22 |
2023-11-1 |
| QC/T 1196-2023 |
车载冰箱 |
Vehicle Compressor Refrigerator |
|
2023-5-22 |
2023-11-1 |
| QC/T 1189-2023 |
乘用车用保险杠 |
Bumper for passenger car |
|
2023-5-22 |
2023-11-1 |
| QC/T 911-2023 |
电源车 |
Power supply vehicle |
全部代替：QC/T 911-2013 |
2023-5-22 |
2023-11-1 |
| QC/T 55-2023 |
汽车座椅舒适性试验方法 |
Comfort Test Method of Automobile Seats |
全部代替：QC/T 55-1993 |
2023-5-22 |
2023-11-1 |
| QC/T 1180-2023 |
配电车 |
Distribution transformer vehicle |
|
2023-5-22 |
2023-11-1 |
| QC/T 265-2023 |
汽车零部件编号规则 |
Coding Rules of Automobile Part and Component |
全部代替：QC/T 265-2004 |
2023-5-22 |
2023-11-1 |
| QC/T 820-2023 |
汽车、摩托车仪表用步进电机 |
Stepper motor for automobile and motorcycle instrument |
全部代替：QC/T 820-2009 |
2023-5-22 |
2023-11-1 |
| QC/T 957-2023 |
洗扫车 |
Cleaning sweeper truck |
全部代替：QC/T 957-2013 |
2023-5-22 |
2023-11-1 |
| QC/T 848-2023 |
拉臂式自装卸装置 |
Hook loader container handling device |
全部代替：QC/T 848-2011 |
2023-5-22 |
2023-11-1 |
| QC/T 1181-2023 |
汽车空调套管式回热换热器 |
Automotive Air-Conditioned Sleeve Type Internal Heat Exchanger Assembly |
|
2023-5-22 |
2023-11-1 |
| QC/T 1182-2023 |
汽车空调铝合金板式换热器 |
Stacked plate heat exchangert |
|
2023-5-22 |
2023-11-1 |
| QC/T 1187-2023 |
汽车安全带试验用假人 |
The Dummy for Automobile seatbelt test |
|
2023-5-22 |
2023-11-1 |
| QC/T 665-2023 |
汽车空调充注阀 |
Charging Valve Assembly for automotive air conditioning |
全部代替：QC/T 665-2000 |
2023-5-22 |
2023-11-1 |
| QC/T 656-2023 |
汽车空调用空气调节装置总成 |
Performance requirement of Automotive air conditioning refrigeration unit |
全部代替：QC/T 656-2000 |
2023-5-22 |
2023-11-1 |
| QC/T 457-2023 |
救护车 |
Ambulance |
全部代替：QC/T 457-2013 |
2023-5-22 |
2023-11-1 |
| QC/T 54-2023 |
洒水车 |
street sprinklers |
全部代替：QC/T 54-2006 |
2023-5-22 |
2023-11-1 |
| QC/T 849-2023 |
舞台车 |
Mobile stage vehicle |
全部代替：QC/T 849-2011 |
2023-5-22 |
2023-11-1 |
| QC/T 556-2023 |
汽车制动器温度测量方法及热电偶安装要求 |
Temperature measurement methods and thermocouple installation requirements for automotive brakes |
全部代替：QC/T 556-1999 部分代替：QC/T 556-1999 部分代完：QC/T 556-1999 |
2023-5-22 |
2023-11-1 |
| QC/T 1183-2023 |
汽车空气动力学术语和定义 |
Automobile aerodynamics terminology |
|
2023-5-22 |
2023-11-1 |
| QC/T 1197-2023 |
汽车气压制动系统用冷凝器性能要求及台架试验方法 |
Performance requirements and bench test methods of condenser for automotive air brake system |
|
2023-5-22 |
2023-11-1 |
| QC/T 1190-2023 |
汽车离合器分泵 |
Clutch slave cylinder of automobile |
|
2023-5-22 |
2023-11-1 |
| QC/T 1010-2023 |
汽车离合器助力器 |
Automobile air-assista booster |
全部代替：QC/T 1010-2015 部分代替：QC/T 1010-2015 部分代完：QC/T 1010-2015 |
2023-5-22 |
2023-11-1 |
| QC/T 1011-2023 |
汽车离合器总泵 |
automobile clutch master cylinder |
全部代替：QC/T 1011-2015 |
2023-5-22 |
2023-11-1 |
| QC/T 29087-2023 |
汽车焊接加工零件未注公差尺寸的极限偏差 |
Limit deviation of tolerance dimensions of automobile welding parts without individual tolerance indication |
全部代替：QC/T 29087-1992 |
2023-5-22 |
2023-11-1 |
| QC/T 714-2023 |
汽车车身金属覆盖件几何公差 |
Geometrical tolerances for cover panel of vehicle body |
全部代替：QC/T 714-2004 |
2023-5-22 |
2023-11-1 |
| QC/T 29017-2023 |
汽车模制塑料零件未注公差尺寸的极限偏差 |
Automotive plastic part undefined dimension tolerance |
全部代替：QC/T 29017-1991 |
2023-5-22 |
2023-11-1 |
| QC/T 270-2023 |
汽车用立式锻压钢质模锻件未注公差尺寸的极限偏差 |
Permissible variations in dimensions without tolerance indication for steel die forgings of automobile made by vertical press forging process |
全部代替：QC/T 270-1999 |
2023-5-22 |
2023-11-1 |
| QC/T 269-2023 |
汽车铸造零件未注公差尺寸的极限偏差 |
Dimensional tolerances for Automotive metal casting parts |
全部代替：QC/T 269-1999 |
2023-5-22 |
2023-11-1 |
| QC/T 268-2023 |
汽车冷冲压加工零件未注公差尺寸的极限偏差 |
Limit deviation of dimension of untolerance for cold stamping parts of automobiles |
全部代替：QC/T 268-1999 |
2023-5-22 |
2023-11-1 |
| QC/T 267-2023 |
汽车切削加工零件未注公差尺寸的极限偏差 |
Dimensional tolerances for Automotive Cutting parts |
全部代替：QC/T 267-1999 |
2023-5-22 |
2023-11-1 |
| QC/T 1186-2023 |
汽车零部件再制造产品技术规范 涡轮增压器 |
The technical specification for remanufacturing of automobile component —Turbocharger |
|
2023-5-22 |
2023-11-1 |
| QC/T 1188-2023 |
汽车零部件再制造产品技术规范 铝合金车身覆盖件 |
Remanufacturing of automobile component--Process specification of Body aluminum sheet metal |
|
2023-5-22 |
2023-11-1 |
| QC/T 1185-2023 |
汽车零部件再制造 热喷涂修复工艺规范 |
Remanufacturing of automobile component—Technical specification for thermal spray repair |
|
2023-5-22 |
2023-11-1 |
| QC/T 1184-2023 |
汽车零部件再制造产品技术规范 装饰用保险杠 |
Technical specification for remanufacturing automobile component—Bumper protector accessories |
|
2023-5-22 |
2023-11-1 |
| GB/T 17346-2023 |
汽车脚踏板位置尺寸测量方法 |
Test methods of automobile pedal position dimensions |
全部代替：GB/T 17346-1998 |
2023-3-17 |
2023-10-1 |
| GB/T 5374-2023 |
摩托车和轻便摩托车可靠性试验方法 |
Test method of reliability for motorcycles and mopeds |
全部代替：GB/T 5374-2008 |
2023-3-17 |
2023-10-1 |
| GB/T 42193.2-2022 |
道路车辆 车辆和外部设备之间排放相关诊断的通信 第2部分：术语、定义、缩写和缩略语的指南 |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics —Part 2:Guidance on terms, definitions,abbreviations and acronyms |
|
2022-12-30 |
2023-7-1 |
| GB/T 42193.3-2022 |
道路车辆 车辆和外部设备之间排放相关诊断的通信 第3部分：诊断连接器和相关电路的要求及使用 |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics —Part 3: Diagnostic connector and related electrical circuit: Specification and use |
|
2022-12-30 |
2023-7-1 |
| GB/T 42193.4-2022 |
道路车辆 车辆和外部设备之间排放相关诊断的通信 第4部分：外部测试设备 |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics —Part 4: External test equipment |
|
2022-12-30 |
2023-7-1 |
| GB/T 42193.7-2022 |
道路车辆 车辆和外部设备之间排放相关诊断的通信 第7部分：数据链安全 |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics —Part 7: Data link security |
|
2022-12-30 |
2023-7-1 |
| GB/T 42284.1-2022 |
道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第1部分：一般规定 |
Road vehicles – Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles – Part 1: General |
|
2022-12-30 |
2023-7-1 |
| GB/T 42284.3-2022 |
道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第3部分：机械负荷 |
Road vehicles – Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles – Part 3: Mechanical loads |
|
2022-12-30 |
2023-7-1 |
| GB/T 42284.4-2022 |
道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第4部分：气候负荷 |
Road vehicles – Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles – Part 4: Climatic loads |
|
2022-12-30 |
2023-7-1 |
| GB/T 42284.5-2022 |
道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第5部分：化学负荷 |
Road vehicles – Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles – Part 5: Chemical loads |
|
2022-12-30 |
2023-7-1 |
| GB/T 34590.2-2022 |
道路车辆 功能安全 第2部分：功能安全管理 |
Road vehicles-Functional Safety - Part 2:Management of functional safety |
全部代替：GB/T 34590.2-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 34590.10-2022 |
道路车辆 功能安全 第10部分：指南 |
Road vehicles-Functional Safety - Part 10:Guideline |
全部代替：GB/T 34590.10-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 3730.1-2022 |
汽车、挂车及汽车列车的术语和定义 第1部分：类型 |
Terms and definitions of motor vehicles，trailers and combination vehicle— Part 1：Types |
全部代替：GB/T 3730.1-2001 |
2022-12-30 |
2023-7-1 |
| GB/T 4570-2022 |
摩托车和轻便摩托车耐久性试验方法 |
Test method of durability for motorcycles and mopeds |
全部代替：GB/T 4570-2008 |
2022-12-30 |
2023-7-1 |
| GB/T 25977-2022 |
除雪车 |
Snow removal vehicle |
全部代替：GB/T 25977-2010 |
2022-12-30 |
2023-7-1 |
| GB/T 12782-2022 |
汽车采暖性能要求和试验方法 |
Requirement and test method of heating performance for motor vehicle |
全部代替：GB/T 12782-2007 |
2022-12-30 |
2023-7-1 |
| GB/Z 42285-2022 |
道路车辆 电子电气系统ASIL等级确定方法指南 |
Road vehicles-ASIL determination guidelines for electrical and electronic system |
|
2022-12-30 |
2023-7-1 |
| GB/T 42193.1-2022 |
道路车辆 车辆和外部设备之间排放相关诊断的通信 第1部分：一般信息和使用案例定义 |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics —Part 1: General information and use case definition |
|
2022-12-30 |
2023-7-1 |
| GB/T 42289-2022 |
旅居车辆 居住用电气系统安全通用要求 |
Leisure accommodation vehicle 一 Safety General requirements for the residential electric system |
|
2022-12-30 |
2023-7-1 |
| GB/T 34590.9-2022 |
道路车辆 功能安全 第9部分：以汽车安全完整性等级为导向和以安全为导向的分析 |
Road vehicles-Functional Safety - Part 9:Automotive safety integrity level(ASIL)-oriented and safety-oriented analyses |
全部代替：GB/T 34590.9-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 34590.11-2022 |
道路车辆 功能安全 第11部分：半导体应用指南 |
Road vehicles-Functional Safety - Part 11: Guidelines on applications to semiconductors |
|
2022-12-30 |
2023-7-1 |
| GB/T 34590.12-2022 |
道路车辆 功能安全 第12部分：摩托车的适用性 |
Road vehicles-Functional Safety - Part 12: Adaptation for motorcycles |
|
2022-12-30 |
2023-7-1 |
| GB/T 29307-2022 |
电动汽车用驱动电机系统可靠性试验方法 |
The reliability test methods of drive motor system for electric vehicles |
全部代替：GB/T 29307-2012 |
2022-12-30 |
2023-7-1 |
| GB/T 34590.6-2022 |
道路车辆 功能安全 第6部分：产品开发：软件层面 |
Road vehicles-Functional Safety - Part 6: Product development at the software level |
全部代替：GB/T 34590.6-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 34590.8-2022 |
道路车辆 功能安全 第8部分：支持过程 |
Road vehicles-Functional Safety - Part 8: Supporting processe |
全部代替：GB/T 34590.8-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 24554-2022 |
燃料电池发动机性能试验方法 |
Performance test methods for fuel cell engines |
全部代替：GB/T 24554-2009 |
2022-12-30 |
2023-7-1 |
| GB/T 34590.4-2022 |
道路车辆 功能安全 第4部分：产品开发：系统层面 |
Road vehicles-Functional Safety - Part 4: Product development at the system level |
全部代替：GB/T 34590.4-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 34590.7-2022 |
道路车辆 功能安全 第7部分：生产、运行、服务和报废 |
Road vehicles-Functional Safety - Part7:Production,operation,service and decommissioning |
全部代替：GB/T 34590.7-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 34590.5-2022 |
道路车辆 功能安全 第5部分：产品开发：硬件层面 |
Road vehicles-Functional Safety - Part 5: Product development at the hardware level |
全部代替：GB/T 34590.5-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 34590.3-2022 |
道路车辆 功能安全 第3部分：概念阶段 |
Road vehicles-Functional Safety - Part 3: Concept phase |
全部代替：GB/T 34590.3-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 34590.1-2022 |
道路车辆 功能安全 第1部分：术语 |
Road vehicles-Functional Safety - Part 1: Vocabulary |
全部代替：GB/T 34590.1-2017 |
2022-12-30 |
2023-7-1 |
| GB/T 13043-2022 |
客车定型试验规程 |
Bus engineering approval evaluation program |
全部代替：GB/T 13043-2006 |
2022-12-30 |
2023-7-1 |
| GB 15084-2022 |
机动车辆 间接视野装置 性能和安装要求 |
Motor vehicles-Device for indirect vision-Requirement of performance and installation |
全部代替：GB 15084-2013 |
2022-12-29 |
2023-7-1 |
| GB/T 41798-2022 |
智能网联汽车 自动驾驶功能场地试验方法及要求 |
Intelligent and connected vehicles——Track testing methods and requirements for automated driving functions |
|
2022-10-12 |
2023-5-1 |
| GB/T 18386.2-2022 |
电动汽车能量消耗量和续驶里程试验方法 第2部分：重型商用车辆 |
Test methods for energy consumption and range of electric vehicles - Part 2: Heavy-duty commercial vehicles |
|
2022-10-12 |
2023-5-1 |
| GB/T 41796-2022 |
商用车辆车道保持辅助系统性能要求及试验方法 |
Performance requirements and test methods for lanekeeping assist system of commercial vehicle |
|
2022-10-12 |
2023-5-1 |
| GB/T 41797-2022 |
驾驶员注意力监测系统性能要求及试验方法 |
Performance requirements and test methods for driver attention monitoring and warning system |
|
2022-10-12 |
2023-5-1 |
| GB/T 41722-2022 |
道路车辆 侧风敏感性 风机输入开环试验方法 |
Road vehicles - Sensitivity to lateral wind - Open-loop test method using wind generator input |
|
2022-10-12 |
2023-5-1 |
| GB/T 41901.1-2022 |
道路车辆 网联车辆方法论 第1部分：通用信息 |
Road Vehicles -- Extended vehicle (ExVe) methodology -- Part 1: General information |
|
2022-10-12 |
2023-5-1 |
| GB/T 41901.2-2022 |
道路车辆 网联车辆方法论 第2部分：设计导则 |
Road Vehicles -- Extended vehicle(ExVe) methodology -- Part 2: Methodology for designing the extended vehicle |
|
2022-10-12 |
2023-5-1 |
| GB 19239-2022 |
燃气汽车燃气系统安装规范 |
Mounting requirements of fuel-gas system for gas vehicles |
全部代替：GB 19239-2013,GB/T 20734-2006 |
2022-8-31 |
2023-1-1 |
| GB 16897-2022 |
制动软管的结构、性能要求及试验方法 |
Brake hose—Structure, performance and test methods |
全部代替：GB 16897-2010 |
2022-8-31 |
2023-1-1 |
| GB/T 23336-2022 |
半挂车通用技术条件 |
General technical requirements for semi-trailer |
全部代替：GB/T 23336-2009 |
2022-7-11 |
2022-11-1 |
| GB/T 41590.1-2022 |
道路车辆 基于K线的诊断通信 第1部分：物理层 |
Road vehicles- Diagnostic communication over K-Line (DoK-Line) Part 1:Physical layer |
|
2022-7-11 |
2023-2-1 |
| GB/T 41601-2022 |
旅居车辆 安全通风要求 |
Leisure accommodation vehicle- Safety ventilation requirements |
|
2022-7-11 |
2022-11-1 |
| GB/T 41484-2022 |
汽车用超声波传感器总成 |
Automotive ultrasonic sensor assembly |
|
2022-4-15 |
2022-11-1 |
| QC/T 1169-2022 |
汽车用液晶仪表 |
Liquid crystal Instrument for automobile |
|
2022-4-8 |
2022-10-1 |
| QC/T 1175-2022 |
电动汽车用高压接触器 |
Technical requirements for HV relay of electric vehicles |
|
2022-4-8 |
2022-10-1 |
| QC/T 1174-2022 |
电动汽车用高压熔断器 |
Technical requirements for HV fuse of electric vehicle |
|
2022-4-8 |
2022-10-1 |
| QC/T 1170-2022 |
汽车玻璃用功能膜 |
Performance Films for Road Vehicle Windows |
|
2022-4-8 |
2022-10-1 |
| QC/T 1171-2022 |
汽车漆面保护膜 |
Paint Protection Film For Motor Vehicle |
|
2022-4-8 |
2022-10-1 |
| QC/T 1166-2022 |
汽车用流媒体后视镜 |
vehicle Streaming Rearview Mirror |
|
2022-4-8 |
2022-10-1 |
| QC/T 1163-2022 |
汽车柴油机 选择性催化还原（SCR）系统用还原剂过滤器 |
Automotive diesel engines Selective catalytic reduction(SCR) system Reduction agent filter |
|
2022-4-8 |
2022-10-1 |
| QC/T 1164-2022 |
汽车用天然气滤清器 |
Natural gas filter for road vehicle |
|
2022-4-8 |
2022-10-1 |
| QC/T 1167-2022 |
乘用车行车制动器噪声台架试验方法 |
passenger vehicle service brake dynamometer squeal noise test method |
|
2022-4-8 |
2022-10-1 |
| QC/T 1172-2022 |
汽车气压制动部件用排气消音器性能要求及台架试验方法 |
Performance requirements and test methords of exhaust muffler for vehicles air brake equipment |
|
2022-4-8 |
2022-10-1 |
| QC/T 1168-2022 |
汽车用电动空气压缩机性能要求及台架试验方法 |
Specifications and bench test methods of electric air compressor for automotive |
|
2022-4-8 |
2022-10-1 |
| QC/T 792-2022 |
电动摩托车和电动轻便摩托车驱动用电机及其控制器 |
Traction motors and controllers of electric motorcycles and electric mopeds |
全部代替：QC/T 792-2007 |
2022-4-8 |
2022-10-1 |
| QC/T 1165-2022 |
汽油乘用车炭罐用空气滤清器 |
Air filter?forcarbon canister of gasoline passenger car |
|
2022-4-8 |
2022-10-1 |
| QC/T 1162-2022 |
汽车外饰件用蜂窝夹层结构制品 |
Standard specification for the exterior parts of automobile with honeycomb sandwich structure |
|
2022-4-8 |
2022-10-1 |
| QC/T 463-2022 |
汽车液力变矩器总成技术要求和台架试验方法 |
Technical requirements and bench test methods for automotive hydrodynamic torque converter assembly |
全部代替：QC/T 29033-1991,QC/T 557-1999,QC/T 463-1999 |
2022-4-8 |
2022-10-1 |
| QC/T 804-2022 |
乘用车仪表板总成和副仪表板总成 |
Instrument panel assembly and console assembly for passenger cars |
全部代替：QC/T 804-2014 |
2022-4-8 |
2022-10-1 |
| QC/T 1016-2022 |
乘用车门内饰板总成 |
Door trim panel assembly for passenger cars |
全部代替：QC/T 1016-2015 |
2022-4-8 |
2022-10-1 |
| QC/T 580-2022 |
汽车变速器总成安装尺寸 |
Mounting dimensions of automobile transmission assembly |
全部代替：QC/T 580-1999 |
2022-4-8 |
2022-10-1 |
| QC/T 80-2022 |
道路车辆 气制动系统用尼龙（聚酰胺）管 |
Road vehicles-polyamide(PA) tubing for air braking systerms |
全部代替：QC/T 80-2011 |
2022-4-8 |
2022-10-1 |
| QC/T 1157-2022 |
汽车产品单位产量综合能耗计算方法 |
Calculation methods and limits of the comprehensive energy consumption of automotive products |
|
2022-4-8 |
2022-10-1 |
| QC/T 1158-2022 |
汽车产品单位产量综合水耗计算方法 |
Calculation methods and limits of comprehensive water consumption of automotive products |
|
2022-4-8 |
2022-10-1 |
| QC/T 1159-2022 |
汽车行业绿色供应链管理评价规范 |
General evaluation specifications for green supply chain management of automotive industry |
|
2022-4-8 |
2022-10-1 |
| QC/T 1160-2022 |
汽车行业整车制造绿色工厂评价导则 |
Guideline for green factory of whole vehicle manufacturing in automobile industry |
|
2022-4-8 |
2022-10-1 |
| QC/T 1161-2022 |
绿色设计产品评价技术规范 汽车 |
Technical specifications for green-design product assessment—Automobile |
|
2022-4-8 |
2022-10-1 |
| QC/T 237-2022 |
汽车驻车制动器性能台架试验方法 |
Bench test methods of parking brake for automobile |
全部代替：QC/T 237-1997 部分代替：QC/T 237-1997 部分代完：QC/T 237-1997 |
2022-4-8 |
2022-10-1 |
| QC/T 1173-2022 |
道路车辆 火花塞匹配性试验方法 |
Road vehicles - Spark-plugs application test method |
|
2022-4-8 |
2022-10-1 |
| QC/T 1179-2022 |
汽车用车轮螺栓技术条件 |
Specification of wheel mounting screw for automobile |
|
2022-4-8 |
2022-10-1 |
| QC/T 1178-2022 |
汽车和挂车 气压制动系统 螺纹孔和管接头 |
Motor vehicle and towed vehicle - Pneumatic braking system - Tapped and male fitting |
|
2022-4-8 |
2022-10-1 |
| QC/T 633-2022 |
客车座椅 |
The seats of passenger vehicles |
全部代替：QC/T 633-2009 |
2022-4-8 |
2022-10-1 |
| QC/T 768-2022 |
客车卫生间 |
Coach toilet |
全部代替：QC/T 768-2006 |
2022-4-8 |
2022-10-1 |
| QC/T 929-2022 |
一端固定式塑料管线夹 |
Plastic cable and tubing clips with side-fix hole |
全部代替：QC/T 929-2013 |
2022-4-8 |
2022-10-1 |
| QC/T 928-2022 |
中间固定式塑料管线夹 |
Plastic cable and tubing clips with interfix hole |
全部代替：QC/T 928-2013 |
2022-4-8 |
2022-10-1 |
| QC/T 618-2022 |
嵌装塑料螺母技术条件 |
Specification for plastic expansion nut |
全部代替：QC/T 618-2013 |
2022-4-8 |
2022-10-1 |
| QC/T 603-2022 |
A型卡扣 |
Clips –A type |
全部代替：QC/T 603-1999 |
2022-4-8 |
2022-10-1 |
| QC/T 604-2022 |
B型卡扣 |
Clips –B type |
全部代替：QC/T 604-1999 |
2022-4-8 |
2022-10-1 |
| QC/T 605-2022 |
C型卡扣 |
Clips –C type |
全部代替：QC/T 605-1999 |
2022-4-8 |
2022-10-1 |
| QC/T 606-2022 |
H型卡扣 |
Clips –H type |
全部代替：QC/T 606-1999 |
2022-4-8 |
2022-10-1 |
| QC/T 624-2022 |
橡胶堵塞 |
Rubber plugst |
全部代替：QC/T 624-2013 |
2022-4-8 |
2022-10-1 |
| QC/T 599-2022 |
端面凸焊螺栓 |
Bolts for projection welding with bossed head |
全部代替：QC/T 599-2013 |
2022-4-8 |
2022-10-1 |
| QC/T 598-2022 |
承面凸焊螺栓 |
Reinforced bolts for projection welding |
全部代替：QC/T 598-1999 |
2022-4-8 |
2022-10-1 |
| QC/T 871-2022 |
双头螺柱 bm=2d |
Double end studs bm=2d |
全部代替：QC/T 871-2011 |
2022-4-8 |
2022-10-1 |
| QC/T 870-2022 |
双头螺柱 bm=1.25d |
Double end studs bm=1.25d |
全部代替：QC/T 870-2011 |
2022-4-8 |
2022-10-1 |
| QC/T 869-2022 |
短周期弧焊焊接螺柱 |
Short cycle arc welding stud |
全部代替：QC/T 869-2011 |
2022-4-8 |
2022-10-1 |
| QC/T 1177-2022 |
汽车空调用冷凝器 |
Condenser for automotive air conditioning |
|
2022-4-8 |
2022-10-1 |
| QC/T 1176-2022 |
汽车空调用蒸发器 |
Evaporator for automotive air conditioning |
|
2022-4-8 |
2022-10-1 |
| GB/T 20076-2021 |
摩托车和轻便摩托车发动机最大扭矩和最大净功率测量方法 |
Measurement methods of maximum torque and maximum net power ofengines for motorcycles and mopeds |
全部代替：GB/T 20076-2006 |
2021-12-31 |
2022-7-1 |
| GB/T 25981-2021 |
道路隔离装置清洗车 |
Road separation facilities cleanout vehicle |
全部代替：GB/T 25981-2010 |
2021-12-31 |
2022-7-1 |
| GB/T 24551-2021 |
汽车安全带提醒装置 |
Safety beltreminderfor motor vehicles |
全部代替：GB/T 24551-2009 |
2021-12-31 |
2022-7-1 |
| GB/T 21437.2-2021 |
道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第2部分：沿电源线的电瞬态传导发射和抗扰性 |
Road vehicles ―Electrical disturbances from conduction and coupling―Part 2: Electrical transient conduction along supply lines only |
全部代替：GB/T 21437.2-2008 |
2021-12-31 |
2022-7-1 |
| GB/T 21437.1-2021 |
道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第1部分：定义和一般规定 |
Road vehicles—Electrical disturbances from conduction and coupling —Part 1: Definitions and general considerations |
全部代替：GB/T 21437.1-2008 |
2021-12-31 |
2022-7-1 |
| GB/T 21437.3-2021 |
道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第3部分：对耦合到非电源线电瞬态的抗扰性 |
Road vehicles—Electrical disturbances from conduction and coupling—Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
全部代替：GB/T 21437.3-2012 |
2021-12-31 |
2022-7-1 |
| GB/T 38775.7-2021 |
电动汽车无线充电系统 第7部分：互操作性要求及测试 车辆端 |
Electric vehicle wireless power transfer—part 7:interoperability requirements and testing—vehicle side |
|
2021-10-11 |
2022-5-1 |
| GB/T 12678-2021 |
汽车可靠性行驶试验方法 |
Reliability running test method for automobiles |
全部代替：GB/T 12678-1990 |
2021-10-11 |
2022-5-1 |
| GB/T 40625-2021 |
汽车加速行驶车外噪声室内测量方法 |
Indoor measurement methods for noise emitted by accelerating motor vehicles |
|
2021-10-11 |
2022-5-1 |
| GB/T 38775.5-2021 |
电动汽车无线充电系统 第5部分：电磁兼容性要求和试验方法 |
Electric vehicle wireless power transfer—Part 5: Electromagnetic compatibility requirements and test methods |
|
2021-10-11 |
2022-5-1 |
| GB/T 40822-2021 |
道路车辆 统一的诊断服务 |
Road vehicles-Unified Diagnostic servieces |
|
2021-10-11 |
2022-5-1 |
| GB/T 39851.3-2021 |
道路车辆 基于控制器局域网的诊断通信 第3部分：排放相关系统的需求 |
Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 3: Requirements for emissions-related systems |
|
2021-10-11 |
2022-5-1 |
| GB/T 40578-2021 |
轻型汽车多工况行驶车外噪声测量方法 |
Measurement methods for noise emitted by light-duty vehicles in multiple driving mode conditions |
|
2021-10-11 |
2022-5-1 |
| GB/T 40861-2021 |
汽车信息安全通用技术要求 |
General technical requirements for cybersecurity of vehicle |
|
2021-10-11 |
2022-5-1 |
| GB/T 40855-2021 |
电动汽车远程服务与管理系统信息安全技术要求及试验方法 |
Technical requirements and test methods for cybersecurity of remote service and management system for electric vehicles |
|
2021-10-11 |
2022-5-1 |
| GB/T 33598.3-2021 |
车用动力电池回收利用 再生利用 第3部分：放电规范 |
Recovery of traction battery used in electric vehicle—Recycling— Part 3：Specification for discharging |
|
2021-10-11 |
2022-5-1 |
| GB/T 40856-2021 |
车载信息交互系统信息安全技术要求及试验方法 |
Technical requirements and test methods for cybersecurity of on-board information interactive system |
|
2021-10-11 |
2022-5-1 |
| GB/T 40857-2021 |
汽车网关信息安全技术要求及试验方法 |
Technical requirements and test methods for cybersecurity of vehicle gateway |
|
2021-10-11 |
2022-5-1 |
| GB/T 27840-2021 |
重型商用车辆燃料消耗量测量方法 |
Fuel consumption test methods for heavy-duty commercial vehicles |
全部代替：GB/T 27840-2011 |
2021-10-11 |
2022-5-1 |
| GB/T 12535-2021 |
汽车起动性能试验方法 |
Test method of starting performance for motor vehicle |
全部代替：GB/T 12535-2007 |
2021-10-11 |
2022-5-1 |
| GB/T 40711.2-2021 |
乘用车循环外技术/装置节能效果评价方法 第2部分：怠速起停系统 |
Off-cycle technology/device energy saving effects evaluation methods for passenger cars—Part 2:Idle start-stop system |
|
2021-10-11 |
2022-5-1 |
| GB/T 40711.3-2021 |
乘用车循环外技术/装置节能效果评价方法 第3部分：汽车空调 |
Off-cycle technology/device energy saving effects evaluation methods for passenger cars—Part 3:Automotive air conditioner |
|
2021-10-11 |
2022-5-1 |
| GB/T 40711.4-2021 |
乘用车循环外技术/装置节能效果评价方法 第4部分：制动能量回收系统 |
Off-cycle technology/device energy saving effects evaluation methods for passenger cars—Part 4:Regenerative braking system |
|
2021-10-11 |
2022-5-1 |
| GB/T 39037.1-2021 |
用于海上滚装船运输的道路车辆的系固点与系固设施布置 通用要求 第1部分：商用车和汽车列车（不包括半挂车） |
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships—General requirements—Part 1：Commercial vehicles and combinations of vehicles，semi-trailers excluded |
|
2021-10-11 |
2022-5-1 |
| GB/T 5334-2021 |
乘用车 车轮 弯曲和径向疲劳性能要求及试验方法 |
Passenger car wheels performance requirements and test methods for cornering and radial fatigue |
全部代替：GB/T 5334-2005 |
2021-10-11 |
2022-5-1 |
| GB/T 5909-2021 |
商用车 车轮 弯曲和径向疲劳性能要求及试验方法 |
Commercial vehicles wheels performance requirements and test methods for cornering and radial fatigue |
全部代替：GB/T 5909-2009 |
2021-10-11 |
2022-5-1 |
| GB/T 40712-2021 |
多用途货车通用技术条件 |
The general specifications for multipurpose goods vehicle |
|
2021-10-11 |
2022-5-1 |
| GB/T 19754-2021 |
重型混合动力电动汽车能量消耗量试验方法 |
Test methods for energy consumption of heavy-duty hybrid electric vehicles |
全部代替：GB/T 19754-2015 |
2021-10-11 |
2022-5-1 |
| QC/T 1153-2021 |
汽车紧固连接螺栓轴力测试 超声波压电陶瓷片法 |
Bolt Tension Test Procedure for Automotive Threaded Joints -- Ultrasonic Method by Piezoelectric Ceramics |
|
2021-8-21 |
2022-2-1 |
| QC/T 1155-2021 |
汽车用USB功率电源适配器 |
Automotive USB power adapter |
|
2021-8-21 |
2022-2-1 |
| QC/T 1156-2021 |
车用动力电池回收利用 单体拆解技术规范 |
echnical specifications for dismental of used EV battery cell |
|
2021-8-21 |
2022-2-1 |
| QC/T 1154-2021 |
汽车微电机用换向器 |
Micromotor commutator for automobile |
|
2021-8-21 |
2022-2-1 |
| QC/T 550-2021 |
汽车用蜂鸣器 |
Vehicle buzzer |
全部代替：QC/T 550-1999 |
2021-8-21 |
2022-2-1 |
| QC/T 1152-2021 |
电动摩托车和电动轻便摩托车用DC/DC变换器技术条件 |
The DC/DC converter for electric motorcycles and electric mopeds specification |
|
2021-8-21 |
2022-2-1 |
| QC/T 62-2021 |
摩托车和轻便摩托车减震器 |
Shock absorber for motorcycles and mopeds |
全部代替：QC/T 62-2007 |
2021-8-21 |
2022-2-1 |
| QC/T 271-2021 |
微型货车防雨密封性试验方法 |
Rain proof performance test method for mini truck |
全部代替：QC/T 271-1999 |
2021-8-21 |
2022-2-1 |
| QC/T 942-2021 |
汽车材料中六价铬的检测方法 |
Test methods of hexavalent chromium in automotive materials |
全部代替：QC/T 942-2013 |
2021-8-21 |
2022-2-1 |
| GB/T 40494-2021 |
机动车产品使用说明书 |
Instructions for the use of power-driven vehicles |
|
2021-8-19 |
2022-3-1 |
| GB/T 34015.3-2021 |
车用动力电池回收利用 梯次利用 第3部分：梯次利用要求 |
Recycling of automotive traction battery—Echelon us—Part 3：Echelon using requirement |
|
2021-8-19 |
2022-3-1 |
| GB/T 24347-2021 |
电动汽车DC/DC变换器 |
DC/DC converter for electric vehicles |
全部代替：GB/T 24347-2009 |
2021-8-19 |
2022-3-1 |
| GB/T 40432-2021 |
电动汽车用传导式车载充电机 |
Conductive on-board charger for electric vehicles |
|
2021-8-19 |
2022-3-1 |
| GB/T 40433-2021 |
电动汽车用混合电源技术要求 |
Technical specifications of combined power source for electric vehicles |
|
2021-8-19 |
2022-3-1 |
| GB/T 40428-2021 |
电动汽车传导充电电磁兼容性要求和试验方法 |
Electromagnetic compatibility requirements and test methods of conductive charging for electric vehicles |
|
2021-8-19 |
2022-3-1 |
| GB/T 40501-2021 |
轻型汽车操纵稳定性试验通用条件 |
Road vehiclesVehicle dynamics test methods Part1 General conditions for passenger cars |
|
2021-8-19 |
2022-3-1 |
| GB/T 40499-2021 |
重型汽车操纵稳定性试验通用条件 |
Road vehicles Vehicle dynamics test methods Part 2 General conditions for heavy vehicles and buse |
|
2021-8-19 |
2022-3-1 |
| GB/T 40430-2021 |
道路车辆 基于控制器局域网的诊断通信 符号集 |
Road vehicles-Diagnostic Communication over Controller Area Network（DoCAN）- Dictionary |
|
2021-8-19 |
2022-3-1 |
| GB/T 40507-2021 |
乘用车 自由转向特性 转向脉冲开环试验方法 |
Passenger cars Free steer behaviour Steering pulse open loop test method |
|
2021-8-19 |
2022-3-1 |
| GB/T 40509-2021 |
汽车转向中心区操纵性过渡特性试验方法 |
Road vehicles Teset method for the quantification of on centre handling Part2 Trasition teste |
|
2021-8-19 |
2022-3-1 |
| GB/T 40521.1-2021 |
乘用车紧急变线试验车道 第1部分：双移线 |
Passenger cars Test track for a severe lane change manoevure part1 Double lane change |
|
2021-8-19 |
2022-3-1 |
| GB/T 40521.2-2021 |
乘用车紧急变线试验车道 第2部分：避障 |
Passenger cars Test track for a severe lane change manoeuvre Part 2 Obstacle avoidance |
|
2021-8-19 |
2022-3-1 |
| GB/T 40512-2021 |
汽车整车大气暴露试验方法 |
Test method of exposure to weathering for motor vehicle |
|
2021-8-19 |
2022-3-1 |
| GB/T 38146.3-2021 |
中国汽车行驶工况 第3部分：发动机 |
China automotive test cycle—Part 3: Engine |
|
2021-8-19 |
2022-3-1 |
| GB/T 34015.4-2021 |
车用动力电池回收利用 梯次利用 第4部分：梯次利用产品标识 |
Recycling of traction battery used in electric vehicle—Echelon use—Part 4: Labels for echelon used battery products |
|
2021-8-19 |
2022-3-1 |
| GB/T 31498-2021 |
电动汽车碰撞后安全要求 |
Post crash safety requirement for electric vehicle |
全部代替：GB/T 31498-2015 |
2021-8-19 |
2022-3-1 |
| GB/T 40429-2021 |
汽车驾驶自动化分级 |
Taxonomy of Driving Automation for Vehicles |
|
2021-8-19 |
2022-3-1 |
| GB/T 14172-2021 |
汽车、挂车及汽车列车静侧倾稳定性台架试验方法 |
Bench test methods of static roll stability for motor vehicles, trailers and combination vehicles |
全部代替：GB/T 14172-2009 |
2021-8-19 |
2022-3-1 |
| QC/T 1149-2021 |
大件运输专用车辆 |
Special purpose vehicle for transporting large indivisible load |
|
2021-5-17 |
2021-10-1 |
| GB/T 40032-2021 |
电动汽车换电安全要求 |
Safety requirements of battery swap for electric vehicles |
|
2021-4-30 |
2021-11-1 |
| GB 9656-2021 |
机动车玻璃安全技术规范 |
Safety technical specification for glazing materials used in power-driven vehicles |
全部代替：GB 9656-2003 |
2021-4-30 |
2023-1-1 |
| GB 40164-2021 |
汽车和挂车 制动器用零部件技术要求及试验方法 |
Automobiles and trailer — Specifications and test methods of brake part |
|
2021-4-30 |
2022-1-1 |
| GB/T 19237-2021 |
汽车用压缩天然气加气机 |
Compressed natural gas dispenser for vehicle |
全部代替：GB/T 19237-2003 |
2021-3-9 |
2021-10-1 |
| GB/T 39896-2021 |
厢式货车系列型谱 |
Series type spectrum for rigid truck with box body |
|
2021-3-9 |
2021-10-1 |
| GB/T 39895-2021 |
汽车零部件再制造产品 标识规范 |
Remanufactured automotive components—Specifications of labels |
|
2021-3-9 |
2021-10-1 |
| GB/T 39899-2021 |
汽车零部件再制造产品技术规范 自动变速器 |
The technical specifications for remanufactured automotive components—Automatic transmission |
|
2021-3-9 |
2021-10-1 |
| GB/T 39901-2021 |
乘用车自动紧急制动系统（AEBS）性能要求及试验方法 |
Performance requirements and test methods for advanced emergency braking system (AEBS) of passenger cars |
|
2021-3-9 |
2021-10-1 |
| GB/T 39897-2021 |
车内非金属部件挥发性有机物和醛酮类物质检测方法 |
Determination of volatile organic compounds and aldehydes and ketones in nonmetallic parts of vehicles |
|
2021-3-9 |
2021-10-1 |
| GB/T 39851.2-2021 |
道路车辆 基于控制器局域网的诊断通信 第2部分：传输层协议和网络层服务 |
Road vehicles—Diagnostic communication over Controller Area Network（DoCAN）—Part 2：Tranport protocol and network layer services |
|
2021-3-9 |
2021-10-1 |
| GB/T 18386.1-2021 |
电动汽车能量消耗量和续驶里程试验方法 第1部分：轻型汽车 |
Test methods for energy consumption and range of electric vehicles—Part 1: Light-duty vehicles |
全部代替：GB/T 18386-2017 部分代替：GB/T 18386-2017 |
2021-3-9 |
2021-10-1 |
| GB/T 19753-2021 |
轻型混合动力电动汽车能量消耗量试验方法 |
Test methods for energy consumption of light-duty hybrid electric vehicles |
全部代替：GB/T 19753-2013 |
2021-3-9 |
2021-10-1 |
| GB/T 32694-2021 |
插电式混合动力电动乘用车 技术条件 |
Plug-in hybrid electric passenger cars—Specifications |
全部代替：GB/T 32694-2016 |
2021-3-9 |
2021-10-1 |
| GB/T 26779-2021 |
燃料电池电动汽车加氢口 |
Hydrogen fuel cell electric vehicle refueling receptacle |
全部代替：GB/T 26779-2011 |
2021-3-9 |
2021-10-1 |
| QC/T 417-2021 |
摩托车和轻便摩托车用电线束总成 |
Electrical wire harness assemblies for motorcycles and mopeds |
全部代替：QC/T 417.2-2001 |
2021-3-5 |
2021-7-1 |
| QC/T 1144-2021 |
摩托车和轻便摩托车用氧传感器 |
Oxygen sensor for motorcycles and mopeds |
|
2021-3-5 |
2021-7-1 |
| QC/T 1147-2021 |
汽车发动机电控硅油风扇离合器 |
Automoble engine electronic silicon oil fan clutch technical specifition |
|
2021-3-5 |
2021-7-1 |
| QC/T 1146-2021 |
甲醇燃料发动机技术条件 |
Technical specification of Methanol fuel engine |
|
2021-3-5 |
2021-7-1 |
| QC/T 1148-2021 |
汽车背门电动开闭系统 |
Power Lift Gate System for Automobile |
|
2021-3-5 |
2021-7-1 |
| QC/T 207-2021 |
汽车用普通气弹簧 |
Common gas spring for automobile |
全部代替：QC/T 207-1996 |
2021-3-5 |
2021-7-1 |
| QC/T 629-2021 |
汽车遮阳板 |
Automobile Sun Visor |
全部代替：QC/T 629-2005 |
2021-3-5 |
2021-7-1 |
| QC/T 1151-2021 |
甲醇燃料汽车技术条件 |
Technical specification of Methanol fuel vehicle |
|
2021-3-5 |
2021-7-1 |
| QC/T 1150-2021 |
甲醇汽车燃料系统技术条件 |
Fuel system technical specifications of methanol vehicle |
|
2021-3-5 |
2021-7-1 |
| QC/T 1145-2021 |
柴油/甲醇双燃料发动机技术条件 |
Technical specification of diesel/methanol dual fuel engine |
|
2021-3-5 |
2021-7-1 |
| QC/T 1143-2021 |
汽车车轮静态弯曲刚度试验方法 |
Test method of static bending rigidity for automobile wheels |
|
2021-3-5 |
2021-7-1 |
| QC/T 1142-2021 |
汽车车轮固有频率试验方法 |
Test method of natural frequency for automobile wheels |
|
2021-3-5 |
2021-7-1 |
| QC/T 1130-2021 |
甲醇汽车燃料消耗量试验方法 |
measirement methods of fuel consumption for methanol vehicles |
|
2021-3-5 |
2021-7-1 |
| GB 17675-2021 |
汽车转向系 基本要求 |
Steering system of motor vehicles—Basic requirements |
全部代替：GB 17675-1999 |
2021-2-20 |
2022-1-1 |
| GB 26512-2021 |
商用车驾驶室乘员保护 |
The protection of the occupants of the cab of commercial vehicles |
全部代替：GB 26512-2011 |
2021-2-20 |
2022-1-1 |
| GB 19578-2021 |
乘用车燃料消耗量限值 |
Fuel consumption limits for passenger cars |
全部代替：GB 19578-2014 |
2021-2-20 |
2021-7-1 |
| GB 20075-2020 |
摩托车乘员扶手和脚踏 |
Passenger handholds and footrests on motorcycles |
全部代替：GB 20075-2006 |
2020-12-24 |
2022-1-1 |
| GB 39732-2020 |
汽车事件数据记录系统 |
Vehicle event data recorder system |
|
2020-12-24 |
2022-1-1 |
| GB/T 33014.7-2020 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第7部分：射频功率直接注入法 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 7:Direct radio frequency power injection |
|
2020-12-14 |
2021-7-1 |
| GB/T 33014.8-2020 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第8部分：磁场抗扰法 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 8:Immunity to magnetic fields |
|
2020-12-14 |
2021-7-1 |
| GB/T 33014.9-2020 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第9部分：便携式发射机法 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 9:Portable transmitters |
|
2020-12-14 |
2021-7-1 |
| GB/T 33014.10-2020 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第10部分：扩展音频范围的传导抗扰法 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 10: Immunity to conducted disturbances in the extended audio frequency range |
|
2020-12-14 |
2021-7-1 |
| QC/T 1136-2020 |
电动汽车用绝缘栅双极晶体管（IGBT）模块环境试验要求及试验方法 |
Environmental test requirements and test methods of IGBT Module for electric vehicles |
|
2020-12-9 |
2021-4-1 |
| QC/T 755-2020 |
液化天然气汽车燃气系统技术条件 |
Technology requirements of fuel-gas system for LNG vehicles |
全部代替：QC/T 755-2006 |
2020-12-9 |
2021-4-1 |
| QC/T 1137-2020 |
汽车包边玻璃 |
Encapsulated glazing for road vehicles |
|
2020-12-9 |
2021-4-1 |
| QC/T 1138-2020 |
汽车滑动窗玻璃组件 |
Sliding window glazing assembly for road vehicles |
|
2020-12-9 |
2021-4-1 |
| QC/T 1141-2020 |
汽车离合器分离轴承总成 |
Automotive clutch release bearing assembly |
|
2020-12-9 |
2021-4-1 |
| QC/T 1139-2020 |
汽车零部件再制造产品技术规范 连杆 |
The technical specification for remanufacturing of automotive components—Connecting rod |
|
2020-12-9 |
2021-4-1 |
| QC/T 1140-2020 |
汽车零部件再制造产品技术规范 曲轴 |
The Technical Specifications for remanufacturing of automotive components??????—Crankshaft |
|
2020-12-9 |
2021-4-1 |
| QC/T 533-2020 |
商用车驱动桥总成 |
Commercial vehicle drive axle assembly |
全部代替：QC/T 533-1999,QC/T 534-1999 |
2020-12-1 |
2021-4-1 |
| GB/T 39263-2020 |
道路车辆 先进驾驶辅助系统(ADAS) 术语及定义 |
Road vehicles—Advanced driver assistance systems—Terms and definitions |
|
2020-11-19 |
2021-6-1 |
| GB/T 39265-2020 |
道路车辆 盲区监测(BSD)系统性能要求及试验方法 |
Road vehicles—Performance requirements and testing methods for blind spot detection (BSD) system |
|
2020-11-19 |
2021-6-1 |
| GB/T 39323-2020 |
乘用车车道保持辅助（LKA）系统性能要求及试验方法 |
Performance requirement and testing method for lane keeping assist (LKA) system of passenger cars |
|
2020-11-19 |
2021-6-1 |
| GB/T 39424.2-2020 |
道路车辆 交通事故分析 第2部分：碰撞严重度测量方法使用指南 |
Road vehicles—Traffic accident analysis—Part 2: Guidelines for the use of impact severity measures |
|
2020-11-19 |
2021-6-1 |
| GB/T 39424.1-2020 |
道路车辆 交通事故分析 第1部分：术语 |
Road vehicles—Traffic accident analysis—Part 1: Vocabulary |
|
2020-11-19 |
2021-6-1 |
| GB/T 39423-2020 |
道路车辆 评价乘员约束性能的事故数据收集 |
Road vehicles—Collection of accident data for evaluation of occupant restraint performance |
|
2020-11-19 |
2021-6-1 |
| GB/T 39132-2020 |
燃料电池电动汽车定型试验规程 |
Fuel cell electric vehicle engineering approval evaluation program |
|
2020-10-11 |
2021-5-1 |
| GB/T 24549-2020 |
燃料电池电动汽车 安全要求 |
Fuel cell electric vehicles—Safety requirements |
全部代替：GB/T 24549-2009 |
2020-9-29 |
2021-4-1 |
| GB/T 5620-2020 |
道路车辆 汽车和挂车制动名词术语及其定义 |
Road vehicles—Vocabulary and difinition for braking of automotive vehicles and their trailers |
全部代替：GB/T 5620-2002 |
2020-9-29 |
2021-4-1 |
| GB/T 12542-2020 |
汽车热平衡能力道路试验方法 |
Thermal balance capacity on-road test method for motor vehicles |
全部代替：GB/T 12542-2009 |
2020-9-29 |
2021-4-1 |
| GB/T 39086-2020 |
电动汽车用电池管理系统功能安全要求及试验方法 |
Functional safety requirements and testing methods for battery management system of electric vehicles |
|
2020-9-29 |
2021-4-1 |
| QC/T 1131-2020 |
汽车材料中多环芳烃的检测方法 |
Test methods of polycyclic aromatic hydrocarbons in automotive materials |
|
2020-8-31 |
2021-1-1 |
| QC/T 1132-2020 |
电动汽车用电动动力系噪声测量方法 |
Measurement method of the noise of electric power train system for electric vehicles |
|
2020-8-31 |
2021-1-1 |
| QC/T 1134-2020 |
发动机进气水分离试验方法 |
Engine Intake Air Water Separation Test Procedure |
|
2020-8-31 |
2021-1-1 |
| QC/T 1133-2020 |
商用汽车空气滤清器安全滤芯 |
Commercial vehicles air filter safety element |
|
2020-8-31 |
2021-1-1 |
| QC/T 770-2020 |
汽车用干式空气滤清器总成 |
Dry type air cleaner assembly of automobiles |
全部代替：QC/T 770-2006 |
2020-8-31 |
2021-1-1 |
| QC/T 1135-2020 |
汽车发动机水滤清器 |
Coolant filter for Automobile Engine |
|
2020-8-31 |
2021-1-1 |
| QC/T 793-2020 |
摩托车和轻便摩托车空气滤清器 |
Air filter for motorcycles and scooters |
全部代替：QC/T 793-2007 |
2020-8-31 |
2021-1-1 |
| QC/T 794-2020 |
内燃机工业滤纸 |
Internal-combustion engine industry filter paper |
全部代替：QC/T 794-2007 |
2020-8-31 |
2021-1-1 |
| GB/T 25085.4-2020 |
道路车辆 汽车电缆 第4部分：交流30 V或直流60 V单芯铝导体电缆的尺寸和要求 |
Road vehicles—Automotive cables—Part 4: Dimensions and requirements for 30 V a.c. or 60 V d.c. single-core aluminium conductor cables |
|
2020-7-21 |
2021-2-1 |
| GB/T 4780-2020 |
汽车车身术语 |
Terms for motor vehicle body |
全部代替：GB/T 4780-2000 |
2020-7-21 |
2021-2-1 |
| GB/T 39015.2-2020 |
道路车辆 牵引车与半挂车之间机械连接互换性 第2部分：低牵引座半挂牵引车与大容积半挂车 |
Road vehicles—Interchangeability of mechanical couplings between tractors and semi-trailers—Part 2: Low-coupling tractors and high-volume semi-trailers |
|
2020-7-21 |
2021-2-1 |
| GB/T 39037.2-2020 |
用于海上滚装船运输的道路车辆的系固点与系固设施布置 通用要求 第2部分：半挂车 |
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships—General requirements—Part 2: Semi-trailers |
|
2020-7-21 |
2021-2-1 |
| GB/T 38892-2020 |
车载视频行驶记录系统 |
On-board driving video recording system |
|
2020-6-2 |
2020-12-1 |
| GB/T 25085.3-2020 |
道路车辆 汽车电缆 第3部分：交流30V或直流60V单芯铜导体电缆的尺寸和要求 |
Road vehicles—Automotive cables—Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single-core copper conductor cables |
全部代替：GB/T 25085-2010 |
2020-6-2 |
2020-12-1 |
| GB/T 38795-2020 |
汽车侧面气囊和帘式气囊模块性能要求 |
Performance requirements of side airbag and curtain airbag module |
|
2020-6-2 |
2020-12-1 |
| GB/T 38796-2020 |
汽车爆胎应急安全装置性能要求和试验方法 |
Performance requirements and test methods of automobile blow-out emergency safety device |
|
2020-6-2 |
2021-6-1 |
| GB/T 19233-2020 |
轻型汽车燃料消耗量试验方法 |
Measurement methods of fuel consumption for light-duty vehicles |
全部代替：GB/T 19233-2008 |
2020-6-2 |
2021-1-1 |
| GB 24155-2020 |
电动摩托车和电动轻便摩托车安全要求 |
Safety specifications for electric motorcycles and electric mopeds |
全部代替：GB 24155-2009 |
2020-5-29 |
2021-1-1 |
| GB 38031-2020 |
电动汽车用动力蓄电池安全要求 |
Electric vehicles traction battery safety requirements |
全部代替：GB/T 31485-2015,GB/T 31467.3-2015 |
2020-5-12 |
2021-1-1 |
| GB 38032-2020 |
电动客车安全要求 |
Electric buses safety requirements |
|
2020-5-12 |
2021-1-1 |
| GB 18384-2020 |
电动汽车安全要求 |
Electric vehicles safety requirements |
全部代替：GB/T 18384.1-2015,GB/T 18384.2-2015,GB/T 18384.3-2015 |
2020-5-12 |
2021-1-1 |
| GB/T 38775.1-2020 |
电动汽车无线充电系统 第1部分：通用要求 |
Electric vehicle wireless power transfer—Part 1:General requirements |
|
2020-4-28 |
2020-11-1 |
| GB/T 21085-2020 |
机动车出厂合格证 |
Qualified certificate of vehicle |
全部代替：GB/T 21085-2007 |
2020-4-28 |
2020-11-1 |
| GB/T 38778-2020 |
专用校车系列型谱 |
Special school bus series pedigree |
|
2020-4-28 |
2020-11-1 |
| GB/T 5137.1-2020 |
汽车安全玻璃试验方法 第1部分：力学性能试验 |
Test methods of safety glazing materials used on road vehicles—Part 1: Mechanical properties tests |
全部代替：GB/T 5137.1-2002 |
2020-3-31 |
2021-2-1 |
| GB/T 5137.2-2020 |
汽车安全玻璃试验方法 第2部分：光学性能试验 |
Test methods of safety glazing materials used on road vehicles—Part 2:Optical properties tests |
全部代替：GB/T 5137.2-2002 |
2020-3-31 |
2021-2-1 |
| GB/T 5137.3-2020 |
汽车安全玻璃试验方法 第3部分： 耐辐照、高温、潮湿、燃烧和耐模拟气候试验 |
Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and simulated weathering resistance tests |
全部代替：GB/T 5137.3-2002 |
2020-3-31 |
2021-2-1 |
| GB/T 5137.4-2020 |
汽车安全玻璃试验方法 第4部分：太阳能特性试验 |
Test methods of safety glazing materials used on road vehicles—Part 4:Determination of solar characteristic |
全部代替：GB/T 5137.4-2001 |
2020-3-31 |
2021-2-1 |
| GB/T 5137.5-2020 |
汽车安全玻璃试验方法 第5部分：耐化学侵蚀性和耐温度变化性试验 |
Test methods of safety glazing materials used on road vehicles—Part 5: Resistant-to-chemical and resistant-to-temperature changes test |
全部代替：GB/T 17339-1998 |
2020-3-31 |
2021-2-1 |
| GB/T 33598.2-2020 |
车用动力电池回收利用 再生利用 第2部分：材料回收要求 |
Recycling of traction battery used in electric vehicle—Recycling—Part 2：Materials recycling requirements |
|
2020-3-31 |
2020-10-1 |
| GB/T 34015.2-2020 |
车用动力电池回收利用 梯次利用 第2部分：拆卸要求 |
Recycling of traction battery used in electric vehicle—Echelon use—Part2：Removing requirements |
|
2020-3-31 |
2020-10-1 |
| GB/T 38587-2020 |
汽车玻璃识别码信息要求 |
Information requirements of automotive glass identification code |
|
2020-3-31 |
2021-2-1 |
| GB/T 38661-2020 |
电动汽车用电池管理系统技术条件 |
Technical specifications of battery management system for electric vehicles |
|
2020-3-31 |
2020-10-1 |
| GB/T 38679-2020 |
车辆行驶跑偏试验方法 |
Test method for vehicle running deviation |
|
2020-3-31 |
2020-10-1 |
| GB/T 38694-2020 |
车辆右转弯提示音要求及试验方法 |
Requirements and test methods of alert for vehicle turnning right |
|
2020-3-31 |
2020-10-1 |
| GB/T 38698.1-2020 |
车用动力电池回收利用 管理规范 第1部分：包装运输 |
Recycling of traction battery used in electric vehicle—Management specification—Part 1：Packing and transporting |
|
2020-3-31 |
2020-10-1 |
| GB/T 38444-2019 |
不停车收费系统 车载电子单元 |
Electronic toll collection—On board unit |
|
2019-12-31 |
2020-7-1 |
| GB 27999-2019 |
乘用车燃料消耗量评价方法及指标 |
Fuel consumption evaluation methods and targets for passenger cars |
全部代替：GB 27999-2014 |
2019-12-31 |
2021-1-1 |
| QC/T 663-2019 |
汽车空调用热力膨胀阀 |
Vehicle air conditioner thermal expansion valve |
全部代替：QC/T 663-2000 |
2019-12-24 |
2020-7-1 |
| QC/T 664-2019 |
汽车空调制冷软管 |
Automotive Air-conditioning Refrigerant Hose |
全部代替：QC/T 664-2000 |
2019-12-24 |
2020-7-1 |
| QC/T 669-2019 |
汽车空调用管接头和管件 |
Automotive Air-Condition Pipe-fittings and Pipes |
全部代替：QC/T 669-2000 |
2019-12-24 |
2020-7-1 |
| GB 4785-2019 |
汽车及挂车外部照明和光信号装置的安装规定 |
Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers |
全部代替：GB 4785-2007 |
2019-12-17 |
2020-7-1 |
| GB 18296-2019 |
汽车燃油箱及其安装的安全性能要求和试验方法 |
Safety property requirements and test methods for automobile fuel tank and its installation |
全部代替：GB 18296-2001 |
2019-12-17 |
2020-7-1 |
| GB/T 38285-2019 |
摩托车和轻便摩托车制动器 |
Brakes for motorcycles and mopeds |
|
2019-12-10 |
2020-7-1 |
| GB/T 38283-2019 |
电动汽车灾害事故应急救援指南 |
Guidance for electric vehicles fire fighting and emergency rescue |
|
2019-12-10 |
2020-7-1 |
| GB/T 5373-2019 |
摩托车和轻便摩托车尺寸和质量参数的测定方法 |
Measuring method of dimensions and masses parameter for motorcycles and mopeds |
全部代替：GB/T 5373-2006 |
2019-12-10 |
2020-7-1 |
| QC/T 826-2019 |
桥梁检测车 |
Bridge inspection vehicle |
全部代替：QC/T 826-2010 |
2019-12-2 |
2020-4-1 |
| QC/T 1107-2019 |
压缩式垃圾车 |
Compression refuse collector |
|
2019-12-2 |
2020-4-1 |
| QC/T 53-2019 |
吸粪车 |
Suction—type excrement tanker |
全部代替：QC/T 53-2006 |
2019-12-2 |
2020-4-1 |
| QC/T 1108-2019 |
商用车用气路电磁阀 |
Gas Solenoid Valve For Commercial Vehicle |
|
2019-12-2 |
2020-4-1 |
| QC/T 708-2019 |
汽车空调风机 |
Vehicle Air Conditioning Fan |
全部代替：QC/T 708-2004,QC/T 29092-1992 |
2019-12-2 |
2020-4-1 |
| QC/T 1109-2019 |
汽车前照明用调光电机 |
Front-lighting leveling actuator |
|
2019-12-2 |
2020-4-1 |
| QC/T 829-2019 |
柴油车排气后处理系统技术条件 |
Technical Specification for Diesel Vehicle After-treatment Systems |
全部代替：QC/T 829-2010 |
2019-12-2 |
2020-4-1 |
| QC/T 1110-2019 |
汽车柴油机燃油加热装置 |
Automotive diesel heating system |
|
2019-12-2 |
2020-4-1 |
| QC/T 1113-2019 |
汽车气压制动系统用快插接头技术要求及试验方法 |
Specification and test methods of quick connectors for automotive air brake system |
|
2019-12-2 |
2020-4-1 |
| QC/T 29082-2019 |
汽车传动轴总成技术条件及台架试验方法 |
Specifications and bench test methods of automobile propeller shaft assembly |
全部代替：QC/T 29082-1992,QC/T 523-1999 |
2019-12-2 |
2020-4-1 |
| QC/T 1114-2019 |
汽车机械式自动变速器（AMT）总成技术条件和台架试验方法 |
Technical specification and Bench test methods for the Automated Manual transmission assembly |
|
2019-12-2 |
2020-4-1 |
| QC/T 568-2019 |
汽车机械式变速器总成技术条件及台架试验方法 |
The specification & bench test methods for manual transmission (MT) assembly |
全部代替：QC/T 568.1-2011,QC/T 29063.1-2011 |
2019-12-2 |
2020-4-1 |
| QC/T 1115-2019 |
自动变速器（AT）技术要求与试验方法 |
Performance requirements and testing methods for automatic transmission(AT) |
|
2019-12-2 |
2020-4-1 |
| QC/T 216-2019 |
汽车用地毯 |
Coving Carpet used in Automotive |
全部代替：QC/T 216-1996 |
2019-12-2 |
2020-4-1 |
| QC/T 1116-2019 |
抑尘车 |
Dust suppression truck |
|
2019-12-2 |
2020-4-1 |
| QC/T 1117-2019 |
畜禽无害化运输车 |
Livestock harmless transport vehicle |
|
2019-12-2 |
2020-4-1 |
| QC/T 453-2019 |
厢式运输车 |
Transport van |
全部代替：QC/T 453-2002 |
2019-12-2 |
2020-4-1 |
| QC/T 447-2019 |
建筑大板运输车 |
Building board unit transport vehicle |
全部代替：QC/T 447-1999 |
2019-12-2 |
2020-4-1 |
| QC/T 1118-2019 |
厢式汽车交换箱体技术条件 |
Technical requirements for swap body of the van |
|
2019-12-2 |
2020-4-1 |
| QC/T 1121-2019 |
汽车用塑料燃油箱 |
Vehicle plastic fuel tank |
|
2019-12-2 |
2020-4-1 |
| QC/T 1122-2019 |
汽车发动机用电动水泵技术条件 |
Technical specifications of electric water pump for vehicle engine |
|
2019-12-2 |
2020-4-1 |
| QC/T 626-2019 |
汽车玻璃升降器 |
Motor vehicles-window regulator |
全部代替：QC/T 626-2008,QC/T 636-2014 |
2019-12-2 |
2020-4-1 |
| QC/T 950-2019 |
汽车座椅加热垫技术要求和试验方法 |
Performance requirement and test of heating car cushion |
全部代替：QC/T 950-2013 |
2019-12-2 |
2020-4-1 |
| QC/T 661-2019 |
汽车空调用液气分离器 |
Vehicle air conditioner accumulator |
全部代替：QC/T 661-2000 |
2019-12-2 |
2020-4-1 |
| QC/T 1123-2019 |
汽车轮胎充气泵 |
Vehicle Tire Inflator |
|
2019-12-2 |
2020-4-1 |
| QC/T 293-2019 |
汽车半轴技术条件和台架试验方法 |
Specifications and bench test methods of automotive axle shaft |
全部代替：QC/T 293-1999,QC/T 294-1999 |
2019-12-2 |
2020-4-1 |
| QC/T 1127-2019 |
乘用车麦弗逊悬架铝合金控制臂总成技术条件及试验方法 |
Passenger car aluminum alloy control arm assembly technical requirements and test methods |
|
2019-12-2 |
2020-4-1 |
| QC/T 1128-2019 |
汽车用摄像头 |
Automotive camera |
|
2019-12-2 |
2020-4-1 |
| QC/T 1129-2019 |
特种车辆后部防撞吸能装置 |
Rear Protection and Energy Absorption Device for Particular Class Vehicle |
|
2019-12-2 |
2020-4-1 |
| QC/T 236-2019 |
汽车内饰材料性能的试验方法 |
Test method for automotive interior material properties |
全部代替：QC/T 236-1997 |
2019-12-2 |
2020-4-1 |
| QC/T 520-2019 |
汽车用摩阻材料小样缩比试验方法 |
Sample scaling test method for automotive friction material |
全部代替：QC/T 520-1999 |
2019-12-2 |
2020-4-1 |
| QC/T 1111-2019 |
商用车 轻合金车轮30°冲击试验方法 |
Commercial vehicles - Light alloy wheels - 30° impact test method |
|
2019-12-2 |
2020-4-1 |
| QC/T 1112-2019 |
乘用车车轮 双轴疲劳试验方法 |
Passenger cars - Biaxial fatigue test method for wheels |
|
2019-12-2 |
2020-4-1 |
| QC/T 1119-2019 |
汽车安全玻璃术语 |
Road vehicles—glazing materials—terminology |
|
2019-12-2 |
2020-4-1 |
| QC/T 1120-2019 |
汽车气压制动系统用快插接头尺寸 |
Dimensions of push-to-connect fittings used on automotive air brake system |
|
2019-12-2 |
2020-4-1 |
| QC/T 660-2019 |
汽车空调用压缩机试验方法 |
The test method of automobile air-conditioning compressors |
全部代替：QC/T 660-2000 |
2019-12-2 |
2020-4-1 |
| QC/T 1124-2019 |
汽车自适应前照明系统调光装置耐久性试验方法 |
Endurance Test Method For Adjuster of Motor Vehicle Adaptive Front Lighting System |
|
2019-12-2 |
2020-4-1 |
| QC/T 1125-2019 |
汽车离合器系统术语及定义 |
Automotive clutch terminology and definition |
|
2019-12-2 |
2020-4-1 |
| QC/T 1126-2019 |
汽车驱动桥术语及定义 |
Automotive drive axle terminology and definition |
|
2019-12-2 |
2020-4-1 |
| GB/T 19836-2019 |
电动汽车仪表 |
Instrumentation for elctric vehicles |
全部代替：GB/T 19836-2005 |
2019-10-18 |
2020-5-1 |
| GB/T 38187-2019 |
汽车电气电子可靠性术语 |
Terminology of reliability for automotive electrical and electronics |
|
2019-10-18 |
2020-5-1 |
| GB/T 38185-2019 |
商用车辆电子稳定性控制系统性能要求及试验方法 |
Performance requirements and testing methods for electronic stability control system(ESC) for commercial vehicles |
|
2019-10-18 |
2020-5-1 |
| GB/T 28046.2-2019 |
道路车辆 电气及电子设备的环境条件和试验 第2部分：电气负荷 |
Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 2: Electrical loads |
全部代替：GB/T 28046.2-2011 |
2019-10-18 |
2020-5-1 |
| GB/T 38186-2019 |
商用车辆自动紧急制动系统（AEBS）性能要求及试验方法 |
Performance requirements and test methods for advanced emergency braking system (AEBS) of commercial vehicles |
|
2019-10-18 |
2020-5-1 |
| GB/T 38183-2019 |
摩托车和轻便摩托车辐板式车轮 |
Spoke-plate wheels for motorcycles and mopeds |
|
2019-10-18 |
2020-5-1 |
| GB/T 38117-2019 |
电动汽车产品使用说明 应急救援 |
Electric vehicles product description—Emergency rescue |
|
2019-10-18 |
2020-5-1 |
| GB/T 12673-2019 |
汽车主要尺寸测量方法 |
Motor vehicle main dimensions measurement method |
全部代替：GB/T 12673-1990 |
2019-10-18 |
2020-5-1 |
| GB/T 38184-2019 |
道路车辆 火花塞热值分级及其测定方法 |
Road vehicles—Spark plug heat rating classification and test method |
|
2019-10-18 |
2020-5-1 |
| GB/T 13881-2019 |
道路车辆 牵引车与挂车之间气制动管连接器 |
Road vehicles—Pneumatic braking connections between towing vehicles and trailers |
全部代替：GB/T 13881-1992 |
2019-10-18 |
2020-5-1 |
| GB/T 38146.2-2019 |
中国汽车行驶工况 第2部分：重型商用车辆 |
China automotive test cycle—Part 2：Heavy-duty commercial vehicles |
|
2019-10-18 |
2020-5-1 |
| GB/T 38146.1-2019 |
中国汽车行驶工况 第1部分：轻型汽车 |
China automotive test cycle—Part 1：Light-duty vehicles |
|
2019-10-18 |
2020-5-1 |
| GB/T 5345-2019 |
道路车辆 石油基或非石油基制动液容器的标识 |
Road vehicles—Labelling of containers for petroleum-based or non-petroleum-based brake fluid |
全部代替：GB/T 5345-2008 |
2019-10-18 |
2020-5-1 |
| GB 15083-2019 |
汽车座椅、座椅固定装置及头枕强度要求和试验方法 |
Strength requirement and test method of automobile seats,their anchorages and any head restraints |
全部代替：GB 15083-2006 |
2019-10-14 |
2020-7-1 |
| GB 16735-2019 |
道路车辆 车辆识别代号（VIN） |
Road vehicle—Vehicle identification number (VIN) |
全部代替：GB 16735-2004 |
2019-10-14 |
2020-1-1 |
| GB 16737-2019 |
道路车辆 世界制造厂识别代号（WMI） |
Road vehicle—World manufacturer identifier (WMI) code |
全部代替：GB 16737-2004 |
2019-10-14 |
2020-1-1 |
| GB 24545-2019 |
车辆车速限制系统技术要求及试验方法 |
Requirements and test methods of speed limitation system for motor vehicles |
全部代替：GB/T 24545-2009 |
2019-10-14 |
2020-7-1 |
| GB 38262-2019 |
客车内饰材料的燃烧特性 |
Flammability of interior materials for buses |
|
2019-10-14 |
2020-7-1 |
| GB 18564.1-2019 |
道路运输液体危险货物罐式车辆 第1部分：金属常压罐体技术要求 |
Road tanker for dangerous liquid goods transportation—Part1:Technical requirements of atmospheric pressure metal tank |
全部代替：GB 18564.1-2006 |
2019-10-14 |
2020-1-1 |
| QC/T 51-2019 |
扫路车 |
Sweeper truck |
全部代替：QC/T 51-2006 |
2019-8-2 |
2020-1-1 |
| QC/T 699-2019 |
车用起重尾板 |
Tail-lifts for vehicles |
全部代替：QC/T 699-2004 |
2019-8-2 |
2020-1-1 |
| QC/T 254-2019 |
运钞车 |
The cash carrying vehicles |
全部代替：QC/T 254-1998,QC/T 255-1998 |
2019-8-2 |
2020-1-1 |
| QC/T 1100-2019 |
液态沥青运输车 |
Liquid asphalt tank truck |
|
2019-8-2 |
2020-1-1 |
| QC/T 719-2019 |
高空作业车 |
Hydraulic aerial cage |
全部代替：QC/T 719-2004 |
2019-8-2 |
2020-1-1 |
| QC/T 1101-2019 |
电动汽车用电加热器 |
Electric heater for electric vehicle |
|
2019-8-2 |
2020-1-1 |
| QC/T 1102-2019 |
汽车电动滑门系统 |
Power sliding door system for automobile |
|
2019-8-2 |
2020-1-1 |
| QC/T 824-2019 |
汽车用转速传感器 |
Rotational speed sensor for automobile |
全部代替：QC/T 824-2009 |
2019-8-2 |
2020-1-1 |
| QC/T 597.3-2019 |
螺纹紧固件预涂粘附层技术条件 第3部分 密封涂层 |
Specification for fastener with adhesive coating Part 3: Sealing coatings |
|
2019-8-2 |
2020-1-1 |
| QC/T 1103-2019 |
12角头耐热锁紧螺母 |
12-point head heat resistant nuts |
|
2019-8-2 |
2020-1-1 |
| QC/T 1104-2019 |
12角头耐热螺栓 |
12-point head heat resistant bolts |
|
2019-8-2 |
2020-1-1 |
| QC/T 1105-2019 |
接地螺栓性能要求及试验方法 |
Earth bolt performance and test methods |
|
2019-8-2 |
2020-1-1 |
| QC/T 1106-2019 |
客车座椅约束隔板 |
Retraining barrier for passenger seat |
|
2019-8-2 |
2020-1-1 |
| GB 15744-2019 |
摩托车和轻便摩托车燃油消耗量限值及测量方法 |
The limits and measurement methods of fuel consumption for motorcycles and mopeds |
全部代替：GB 15744-2008,GB 16486-2008 |
2019-7-29 |
2020-7-1 |
| GB/T 19951-2019 |
道路车辆 电气/电子部件对静电放电抗扰性的试验方法 |
Road vehicles—Disturbances test methods for electrical/electronic component from electrostatic discharge |
全部代替：GB/T 19951-2005 |
2019-6-4 |
2020-1-1 |
| GB/T 37437-2019 |
正面安全气囊 离位乘员保护技术要求 |
Frontal airbag—Technical requirements of protection for out of position occupant |
|
2019-5-10 |
2019-12-1 |
| GB/T 17275-2019 |
货运牵引杆挂车通用技术条件 |
Technical requirements for freight draw-bar trailers |
全部代替：GB/T 17275-1998 |
2019-5-10 |
2019-12-1 |
| GB/T 37474-2019 |
汽车安全气囊系统误作用试验的方法和要求 |
Methods and requirements of airbag system abuse test for automobile |
|
2019-5-10 |
2019-12-1 |
| GB 15742-2019 |
机动车用喇叭的性能要求及试验方法 |
Performance requirements and test methods of horn for motor vehicles |
全部代替：GB 15742-2001 |
2019-4-4 |
2020-1-1 |
| GB 5920-2019 |
汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能 |
Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers |
全部代替：GB 5920-2008 |
2019-4-4 |
2020-1-1 |
| GB 23255-2019 |
机动车昼间行驶灯配光性能 |
Photometric characteristics of daytime running lamps for power driven vehicles |
全部代替：GB 23255-2009 |
2019-4-4 |
2020-1-1 |
| GB/T 5359.1-2019 |
摩托车和轻便摩托车术语 第1部分：车辆类型 |
Term for motorcycles and mopeds – Part 1: Types of vehicle |
全部代替：GB/T 5359.1-2008 |
2019-3-25 |
2019-10-1 |
| GB/T 37336-2019 |
汽车制动鼓 |
Brake drum for automobile |
|
2019-3-25 |
2019-10-1 |
| GB/T 37337-2019 |
汽车侧面柱碰撞的乘员保护 |
Protection of the occupants in the event of a lateral pole collision |
|
2019-3-25 |
2019-10-1 |
| GB/T 37338-2019 |
电动摩托车和电动轻便摩托车用仪表 |
Instrumentation for electric motorcycles and mopeds |
|
2019-3-25 |
2019-10-1 |
| GB/T 37340-2019 |
电动汽车能耗折算方法 |
Conversion methods for energy consumption of electric vehicles |
|
2019-3-25 |
2019-10-1 |
| GB/T 37153-2018 |
电动汽车低速提示音 |
Acoustic vehicle alerting system of electric vehicles running at low speed |
|
2018-12-28 |
2019-7-1 |
| GB/T 37154-2018 |
燃料电池电动汽车 整车氢气排放测试方法 |
Fuel cell electric vehicles—Test methods of hydrogen emission |
|
2018-12-28 |
2019-7-1 |
| GB/T 37133-2018 |
电动汽车用高压大电流线束和连接器技术要求 |
Technical specifications of high duty cables and connectors for electric vehicles |
|
2018-12-28 |
2019-7-1 |
| GB/T 36980-2018 |
电动汽车能量消耗率限值 |
Energy consumption limits for electric vehicles |
|
2018-12-28 |
2019-7-1 |
| GB/T 37245-2018 |
中置轴挂车通用技术条件 |
General technical requirements for centre-axle trailer |
|
2018-12-28 |
2019-7-1 |
| GB/T 36881-2018 |
多用途面包车安全技术条件 |
The safety technique specifications of Multi-purpose MiniVan |
|
2018-10-10 |
2019-5-1 |
| GB/T 36883-2018 |
液化天然气汽车技术条件 |
Technical specification of LNG vehicle |
|
2018-10-10 |
2019-5-1 |
| GB 36581-2018 |
汽车车轮安全性能要求及试验方法 |
Safety performance requirements and test methods of automobile wheels |
|
2018-9-17 |
2020-1-1 |
| GB/T 36672-2018 |
电动摩托车和电动轻便摩托车用锂离子电池 |
Lithium-ion battery for electric mopeds and motorcycles |
|
2018-9-17 |
2019-4-1 |
| GB/T 24156-2018 |
电动摩托车和电动轻便摩托车 动力性能 试验方法 |
Electric motorcycles and electric mopeds—Power performance—Test method |
全部代替：GB/T 24156-2009 |
2018-9-17 |
2019-4-1 |
| GB/T 24158-2018 |
电动摩托车和电动轻便摩托车通用技术条件 |
General specifications for electric motorcycles and electric mopeds |
全部代替：GB/T 24158-2009 |
2018-9-17 |
2019-4-1 |
| QC/T 645-2018 |
清障车 |
Tow truck |
全部代替：QC/T 645-2005 |
2018-7-4 |
2019-1-1 |
| QC/T 1094-2018 |
摩托车起动用锂离子电池通用技术条件 |
General specification of lithium ion batteries for motorcycle starting |
|
2018-7-4 |
2019-1-1 |
| QC/T 1095-2018 |
汽车辅助真空泵性能要求及台架试验方法 |
Performance requierments and bench test methods of motor vehicle assist vacuum pump |
|
2018-7-4 |
2019-1-1 |
| QC/T 788-2018 |
汽车踏板装置性能要求及台架试验方法 |
Performance requirements and bench test methods of motor vehicle pedal device |
全部代替：QC/T 788-2007 |
2018-7-4 |
2019-1-1 |
| QC/T 311-2018 |
汽车液压制动主缸性能要求及台架试验方法 |
Performance requirements and bench test methods of motor vehicle brake master cylinder |
全部代替：QC/T 311-2008 |
2018-7-4 |
2019-1-1 |
| QC/T 564-2018 |
乘用车行车制动器性能要求及台架试验方法 |
Performance requirements and test methods for passenger car service brake |
全部代替：QC/T 564-2008 |
2018-7-4 |
2019-1-1 |
| QC/T 1096-2018 |
乘用车用扭转梁后桥疲劳寿命台架试验方法 |
Bench test methods of fatigue life for torsion beam rear axle of passenger cars |
|
2018-7-4 |
2019-1-1 |
| QC/T 1097-2018 |
乘用车用前桥水平模块疲劳寿命台架试验方法 |
Bench test methods of fatigue life for front axle horizontal module of passenger cars |
|
2018-7-4 |
2019-1-1 |
| QC/T 491-2018 |
汽车减振器性能要求及台架试验方法 |
Automobile Shock Absorber Technique requirements and Test Methods |
全部代替：QC/T 491--1999,QC/T 545-1999 |
2018-7-4 |
2019-1-1 |
| QC/T 1098-2018 |
汽车离合器用粉末冶金盘毂技术条件 |
Technical specification for powder metallurgy hub used in automotive clutch |
|
2018-7-4 |
2019-1-1 |
| QC/T 1099-2018 |
汽车主减速器总成可压缩弹性隔套技术条件 |
Specification for collapsible spacer used in automotive drive head assembly |
|
2018-7-4 |
2019-1-1 |
| GB/T 18411-2018 |
机动车产品标牌 |
Power-driven vehicles manufacturer’s plate |
全部代替：GB/T 18411-2001 |
2018-6-7 |
2019-1-1 |
| GB/T 36282-2018 |
电动汽车用驱动电机系统电磁兼容性要求和试验方法 |
Electromagnetic compatibility requirements and test methods of drive motor system for electric vehicles |
|
2018-6-7 |
2019-1-1 |
| GB/T 36120-2018 |
机动车用儿童约束系统产品标识 |
Production label for child restraint system of power-driven vehicles |
|
2018-5-14 |
2018-12-1 |
| GB/T 36121-2018 |
旅居挂车技术要求 |
Technical requirements for caravans |
|
2018-5-14 |
2018-12-1 |
| GB/T 36123-2018 |
燃气汽车泄漏报警装置技术要求 |
Technical requirements for gas leakage alarm device of gas vehicle |
|
2018-5-14 |
2018-12-1 |
| GB/T 36124-2018 |
机动车用儿童约束系统产品型号编制规则及识别代号 |
Model coding rules and identification number of child restraint system |
|
2018-5-14 |
2018-12-1 |
| GB/T 36125-2018 |
行动不便人员运送车 |
Vehicle for passenger with reduced mobility |
|
2018-5-14 |
2018-12-1 |
| GB/T 12539-2018 |
汽车爬陡坡试验方法 |
Motor vehicles steep hill climbing test method |
全部代替：GB/T 12539-1990 |
2018-5-14 |
2018-12-1 |
| GB/T 25978-2018 |
道路车辆 标牌和标签 |
Road vehicl—Plates and label |
全部代替：GB/T 25978-2010 |
2018-5-14 |
2018-12-1 |
| GB/T 36126-2018 |
汽车用液化天然气加气机 |
Liquefied natural gas dispenser for vehicle |
|
2018-5-14 |
2018-12-1 |
| GB/T 36149-2018 |
快递汽车技术条件 |
Express delivery vehicles specifications |
|
2018-5-14 |
2018-12-1 |
| GB 36220-2018 |
运油车辆和加油车辆安全技术条件 |
Safety technical requirements of oil transport tankers and refueling tankers |
|
2018-5-14 |
2019-1-1 |
| QC/T 243-2018 |
汽车车轮安装面平面度要求及检测方法 |
Flatness Requirements and Test Methods of Wheel Attachment Face |
全部代替：QC/T 243-2004 |
2018-4-30 |
2018-9-1 |
| QC/T 1092-2018 |
商用车15°深槽钢制车轮静态刚度试验方法 |
Static Stiffness Test Methods for 15° Drop Center Commercial Vehicle Steel Wheels |
|
2018-4-30 |
2018-9-1 |
| QC/T 932-2018 |
道路运输液体危险货物罐式车辆紧急切断阀 |
Emergency shutoff valve of road tanker for dangerous liquid goods transportation |
全部代替：QC/T 932-2012 |
2018-4-30 |
2018-9-1 |
| QC/T 456-2018 |
颗粒粮食散装车辆 |
Bulk vehicles for particle grain |
全部代替：QC/T 456-1999 |
2018-4-30 |
2018-9-1 |
| QC/T 790-2018 |
汽车和挂车制动气室性能要求及台架试验方法 |
Performance requirements and bench test methods of brake chamber for automotive vehicle and trailer |
全部代替：QC/T 790-2007 |
2018-4-30 |
2018-9-1 |
| QC/T 1093-2018 |
乘用车侧门防撞杆 |
Side impact tube beam for passenger car |
|
2018-4-30 |
2018-9-1 |
| QC/T 696-2018 |
汽车底盘集中润滑供油系统 |
The centralized lubrication system of automotive chassis |
全部代替：QC/T 696-2011 |
2018-4-30 |
2018-9-1 |
| QC/T 695-2018 |
汽车用继电器 |
Automotive relay |
全部代替：QC/T 695-2002,QC/T 419-1999 |
2018-4-30 |
2018-9-1 |
| GB/T 36048-2018 |
乘用车CAN总线物理层技术要求 |
Passenger cars physical layer technical specification of CAN bus |
|
2018-3-15 |
2018-10-1 |
| GB 20300-2018 |
道路运输爆炸品和剧毒化学品车辆安全技术条件 |
Safety specifications for road transportation vehicle of explosive substance and chemical toxic substance |
全部代替：GB 20300-2006 |
2018-2-6 |
2018-7-1 |
| GB 20073-2018 |
摩托车和轻便摩托车制动性能要求及试验方法 |
Performance and measurement method for braking of motorcycles and mopeds |
全部代替：GB 20073-2006 |
2018-2-6 |
2018-7-1 |
| GB 30510-2018 |
重型商用车辆燃料消耗量限值 |
Fuel consumption limits for heavy-duty commercial vehicles |
全部代替：GB 30510-2014 |
2018-2-6 |
2019-7-1 |
| GB/T 24157-2017 |
电动摩托车和电动轻便摩托车续驶里程及残电指示试验方法 |
Test methods of range and indication for the state of charge for electric motorcycles and electric mopeds |
全部代替：GB/T 24157-2009 |
2017-12-29 |
2018-7-1 |
| GB/T 35360-2017 |
汽车转向系统术语和定义 |
Motor vehicles steering system terms and definitions |
|
2017-12-29 |
2018-7-1 |
| GB/T 35359-2017 |
燃油滤清器 单次通过原始滤清效率试验方法 |
Fuel filter—Initial single-pass efficiency test method |
|
2017-12-29 |
2018-7-1 |
| GB/T 35358.2-2017 |
汽车发动机和压缩机进气空气滤清装置 第2部分：粗颗粒分级效率测试(5μm到40μm) |
Inlet air cleaning equipment for vehicle engines and compressors—Part 2: Fractional efficiency testing with coarse particles(5 μm to 40 μm optical diameter) |
|
2017-12-29 |
2018-7-1 |
| GB/T 35358.1-2017 |
汽车发动机和压缩机进气空气滤清装置 第1部分：细颗粒分级效率测试(0.3μm到5μm) |
Inlet air cleaning equipment for vehicle engines and compressors—Part 1: Fractional efficiency testing with fine particles(0.3 μm to 5 μm optical diameter) |
|
2017-12-29 |
2018-7-1 |
| GB/T 35348-2017 |
柴油机 燃油滤清器 油/水分离效率的评定方法 |
Diesel engines—Fuel filters—Method for evaluating fuel/water separation efficiency |
|
2017-12-29 |
2018-7-1 |
| GB/T 35180-2017 |
商用车空气悬架推力杆橡胶铰接头技术规范 |
Technical specifications for rubber bushing used for torque rod of air suspension for commercial vehicle |
|
2017-12-29 |
2018-7-1 |
| GB/T 35178-2017 |
燃料电池电动汽车 氢气消耗量 测量方法 |
Fuel cell electric vehicles—Hydrogen consumption—Test methods |
|
2017-12-29 |
2018-7-1 |
| GB/T 35175-2017 |
汽车自动变速器用高速开关电磁阀 |
High speed on-off solenoid valve for automotive automatic transmission |
|
2017-12-29 |
2018-7-1 |
| GB/T 35369-2017 |
汽车安全带提醒用乘员探测装置 |
Passenger detection device for vehicle seat belt reminder |
|
2017-12-29 |
2018-7-1 |
| GB/T 35363-2017 |
汽车发动机柴油滤清器和汽油滤清器 滤清效率和纳污容量的测定方法 颗粒计数法 |
Diesel fuel and petrol filters for vehicle engines—The test method for filtration efficiency and contaminant retention capacity—Method of particle counting |
|
2017-12-29 |
2018-7-1 |
| GB 20074-2017 |
摩托车和轻便摩托车外部凸出物 |
External projections for motorcycles and mopeds |
全部代替：GB 20074-2006 |
2017-11-1 |
2018-1-1 |
| GB 34659-2017 |
汽车和挂车防飞溅系统性能要求和测量方法 |
Requirements and test methods relating to the spray-suppression systems of motor vehicles and their trailers |
|
2017-11-1 |
2018-1-1 |
| GB 34660-2017 |
道路车辆 电磁兼容性要求和试验方法 |
Road vehicles—Requirements and test methods of electromagnetic compatibility |
|
2017-11-1 |
2018-1-1 |
| GB/T 6420-2017 |
货运挂车系列型谱 |
Freight trailer series pedigree |
全部代替：GB/T 6420-2004 |
2017-10-14 |
2018-5-1 |
| GB/T 34600-2017 |
汽车零部件再制造产品技术规范 点燃式、压燃式发动机 |
The technical specification for remanufacturing of automotive components—Spark and compression ignition engines |
|
2017-10-14 |
2018-5-1 |
| GB 26149-2017 |
乘用车轮胎气压监测系统的性能要求和试验方法 |
Performance requirements and test methods of tire pressure monitoring system for passenger cars |
全部代替：GB/T 26149-2010 |
2017-10-14 |
2018-1-1 |
| GB/T 7825-2017 |
道路车辆 火花塞 试验方法和要求 |
Road vehicles—Spark-plugs—Test methods and requirements |
全部代替：GB/T 7825-1987 |
2017-10-14 |
2018-5-1 |
| GB/T 12536-2017 |
汽车滑行试验方法 |
Coastdown test method of motor vehicles |
全部代替：GB/T 12536-1990 |
2017-10-14 |
2018-5-1 |
| GB/T 13061-2017 |
商用车空气悬架用空气弹簧技术规范 |
Technical speciffication of air spring used for air suspension of commercial vehicle |
全部代替：GB/T 13061-1991 |
2017-10-14 |
2018-5-1 |
| GB 13094-2017 |
客车结构安全要求 |
The safety requirements for bus construction |
全部代替：GB 13094-2007,GB 18986-2003,GB/T 19950-2005 |
2017-10-14 |
2018-1-1 |
| GB/T 18363-2017 |
汽车用压缩天然气加气口 |
Filling receptacle of CNG vehicle |
全部代替：GB/T 18363-2001 |
2017-10-14 |
2018-5-1 |
| GB/T 18364-2017 |
汽车用液化石油气加气口 |
Filling receptacle of LPG vehicle |
全部代替：GB/T 18364.1-2001,GB/T 18364.2-2005 |
2017-10-14 |
2018-5-1 |
| GB/T 18386-2017 |
电动汽车 能量消耗率和续驶里程 试验方法 |
Electric vehicles—Energy consumption and range—Test procedures |
全部代替：GB/T 18386-2005 |
2017-10-14 |
2018-5-1 |
| GB/T 19596-2017 |
电动汽车术语 |
Terminology of electric vehicles |
全部代替：GB/T 19596-2004 |
2017-10-14 |
2018-5-1 |
| GB/T 34422-2017 |
汽车用制动盘 |
Brake disc for automobile |
|
2017-10-14 |
2018-5-1 |
| GB/T 34425-2017 |
燃料电池电动汽车 加氢枪 |
Fuel cell electric vehicles—Hydrogen refuelling nozzle |
|
2017-10-14 |
2018-5-1 |
| GB/T 34585-2017 |
纯电动货车 技术条件 |
Battery electric goods vehicles—Specifications |
|
2017-10-14 |
2018-7-1 |
| GB/T 34586-2017 |
道路车辆 燃气火花塞 试验方法和要求 |
Road vehicles—Spark-plugs for gas engines—Test methods and requirements |
|
2017-10-14 |
2018-7-1 |
| GB/T 34588-2017 |
重型商用车辆 转弯制动 开环试验方法 |
Heavy commercial vehicles—Braking in a turn—Open-loop test methods |
|
2017-10-14 |
2018-7-1 |
| GB/T 34589-2017 |
道路车辆 诊断连接器 |
Road vehicles—Diagnostic connector |
|
2017-10-14 |
2018-7-1 |
| GB/T 34590.1-2017 |
道路车辆 功能安全 第1部分：术语 |
Road vehicles—Functional safety—Part 1: Vocabulary |
|
2017-10-14 |
2018-5-1 |
| GB/T 34590.2-2017 |
道路车辆 功能安全 第2部分：功能安全管理 |
Road vehicles—Functional safety—Part 2: Management of functional safety |
|
2017-10-14 |
2018-5-1 |
| GB/T 34590.3-2017 |
道路车辆 功能安全 第3部分：概念阶段 |
Road vehicles—Functional safety—Part 3: Concept phase |
|
2017-10-14 |
2018-5-1 |
| GB/T 34590.4-2017 |
道路车辆 功能安全 第4部分：产品开发：系统层面 |
Road vehicles—Functional safety—Part 4: Product development at the system level |
|
2017-10-14 |
2018-5-1 |
| GB/T 34590.5-2017 |
道路车辆 功能安全 第5部分：产品开发：硬件层面 |
Road vehicles—Functional safety—Part 5: Product development at the hardware level |
|
2017-10-14 |
2018-5-1 |
| GB/T 34590.6-2017 |
道路车辆 功能安全 第6部分：产品开发：软件层面 |
Road vehicles—Functional safety—Part 6: Product development at the software level |
|
2017-10-14 |
2018-5-1 |
| GB/T 34590.7-2017 |
道路车辆 功能安全 第7部分：生产和运行 |
Road vehicles—Functional safety—Part 7: Production and operation |
|
2017-10-14 |
2018-5-1 |
| GB/T 34590.8-2017 |
道路车辆 功能安全 第8部分：支持过程 |
Road vehicles—Functional safety—Part 8: Supporting processes |
|
2017-10-14 |
2018-5-1 |
| GB/T 34590.9-2017 |
道路车辆 功能安全 第9部分：以汽车安全完整性等级为导向和以安全为导向的分析 |
Road vehicles—Functional safety—Part 9: Automotive Safety Integrity Level (ASIL)-oriented safety-oriented and analyses |
|
2017-10-14 |
2018-5-1 |
| GB/T 34590.10-2017 |
道路车辆 功能安全 第10部分：指南 |
Road vehicles—Functional safety—Part 10: Guideline |
|
2017-10-14 |
2018-5-1 |
| GB/T 34591-2017 |
商用车空气悬架术语 |
Terms of air suspension for commercial vehicle |
|
2017-10-14 |
2018-5-1 |
| GB/T 34593-2017 |
燃料电池发动机氢气排放测试方法 |
Test methods of hydrogen emission for fuel cell engine |
|
2017-10-14 |
2018-5-1 |
| GB/T 34595-2017 |
汽车零部件再制造产品技术规范 水泵 |
The technical specifications for remanufacturing of automotive components—Water pump |
|
2017-10-14 |
2018-5-1 |
| GB/T 34596-2017 |
汽车零部件再制造产品技术规范 机油泵 |
The technical specifications for remanufacturing of automotive components—Oil pump |
|
2017-10-14 |
2018-5-1 |
| GB/T 34597-2017 |
乘用车 防抱制动系统(ABS)直线制动距离 开环试验方法 |
Passenger cars—Stopping distance at straight-line braking with ABS—Open loop test method |
|
2017-10-14 |
2018-5-1 |
| GB/T 34598-2017 |
插电式混合动力电动商用车 技术条件 |
Plug-in hybrid electric commercial vehicles—Specifications |
|
2017-10-14 |
2018-5-1 |
| GB 34655-2017 |
客车灭火装备配置要求 |
Specifications for extinguishing equipment arrangement in bus |
|
2017-10-14 |
2018-1-1 |
| GB/T 34657.2-2017 |
电动汽车传导充电互操作性测试规范 第2部分：车辆 |
Interoperability test specifications of electric vehicle conductive charging—Part 2：Vehicle |
|
2017-10-14 |
2018-5-1 |
| GB/T 4094.2-2017 |
电动汽车 操纵件、指示器及信号装置的标志 |
Electric vehicles—Symbols for controls, indicators and tell-tales |
全部代替：GB/T 4094.2-2005 |
2017-9-29 |
2019-7-1 |
| GB 11567-2017 |
汽车及挂车侧面和后下部防护要求 |
Motor vehicles and trailers-lateral and rear underrun protection requirements |
全部代替：GB 11567.1-2001,GB 11567.2-2001 |
2017-9-29 |
2018-1-1 |
| GB/T 18954-2017 |
摩托车和轻便摩托车底盘测功机行驶阻力的设定方法 |
Methods of setting running resistance on a chassis dynamometer for motorcycles and mopeds |
全部代替：GB/T 18954-2003 |
2017-7-31 |
2018-2-1 |
| GB/T 34013-2017 |
电动汽车用动力蓄电池产品规格尺寸 |
Dimension of traction battery for electric vehicles |
|
2017-7-12 |
2018-2-1 |
| GB/T 34014-2017 |
汽车动力蓄电池编码规则 |
Coding regulation for automotive traction battery |
|
2017-7-12 |
2018-2-1 |
| GB/T 34015-2017 |
车用动力电池回收利用 余能检测 |
Recycling of traction battery used in electric vehicle—Test of residual capacity |
|
2017-7-12 |
2018-2-1 |
| QC/T 1089-2017 |
电动汽车再生制动系统要求及试验方法 |
Requirements and test methods for regenerative braking system in electric vehicles |
|
2017-7-7 |
2018-1-1 |
| QC/T 1090-2017 |
汽车发动机用密封垫片技术条件 |
Specifications of sealing gaskets for automotive engines |
|
2017-7-7 |
2018-1-1 |
| GB/T 18387-2017 |
电动车辆的电磁场发射强度的限值和测量方法 |
Limits and test method of magnetic and electric field strength from eletric vehicles |
全部代替：GB/T 18387-2008 |
2017-5-12 |
2017-12-1 |
| GB 22757.1-2017 |
轻型汽车能源消耗量标识 第1部分：汽油和柴油汽车 |
Energy consumption label for light-duty vehicles—Part 1: For gasoline and diesel vehicles |
全部代替：GB 22757-2008 |
2017-5-12 |
2018-1-1 |
| GB 22757.2-2017 |
轻型汽车能源消耗量标识 第2部分：可外接充电式混合动力电动汽车和纯电动汽车 |
Energy consumption label for light-duty vehicles—Part 2: For off-vehicle-chargeable hybrid electric vehicles and pure electric vehicles |
|
2017-5-12 |
2018-1-1 |
| GB/T 31465.6-2017 |
道路车辆 熔断器 第6部分：螺栓式高压熔断器 |
Road vehicles—Fuse-links—Part 6: Fuse-links with bolt-in contacts with high voltage |
|
2017-5-12 |
2017-12-1 |
| GB/T 31465.7-2017 |
道路车辆 熔断器 第7部分：短引脚式熔断器 |
Road vehicles—Fuse-links—Part 7: Fuse-links with shortened tabs |
|
2017-5-12 |
2017-12-1 |
| GB/T 33598-2017 |
车用动力电池回收利用 拆解规范 |
Recycling of traction battery used in electric vehicle—Dismantling specification |
|
2017-5-12 |
2017-12-1 |
| QC/T 727-2017 |
汽车、摩托车用仪表 |
Instrument for automobile and motorcycle |
全部代替：QC/T 727-2007 |
2017-4-21 |
2017-10-1 |
| QC/T 803-2017 |
车用氧传感器 |
Oxygen sensor for motor vehicles |
全部代替：QC/T 803.1-2008 |
2017-4-21 |
2017-10-1 |
| QC/T 1072-2017 |
汽车用档位传感器 |
Automotive shift position sensor |
|
2017-4-21 |
2017-10-1 |
| QC/T 1073.1-2017 |
汽车用加速度传感器 第1部分：线加速度传感器 |
Automotive acceleromete sensor—Part1: linear acceleromete sensor |
|
2017-4-21 |
2017-10-1 |
| QC/T 1074-2017 |
汽车零部件再制造产品技术规范 气缸盖 |
The technical specification for remanufacturing of automotive components —Cylinder head |
|
2017-4-21 |
2017-10-1 |
| QC/T 1075-2017 |
排气催化转化器用金属蜂窝载体技术条件 |
Technical specification of honeycomb metal substrate for exhaust catalytic converter |
|
2017-4-21 |
2017-10-1 |
| QC/T 777-2017 |
汽车电磁风扇离合器技术条件 |
The technical conditions of electromagnetic fan clutch for automobile |
全部代替：QC/T 777-2007 |
2017-4-21 |
2017-10-1 |
| QC/T 1076-2017 |
无级变速器（CVT）性能要求及试验方法 |
Performance requirements and testing methods for continuously variable transmission |
|
2017-4-21 |
2017-10-1 |
| QC/T 1077-2017 |
汽车自动控制变速器分类的术语及定义 |
Terms of automotive automatic transmission classifications |
|
2017-4-21 |
2017-10-1 |
| QC/T 1078-2017 |
广告车 |
Advertising vehicles |
|
2017-4-21 |
2017-10-1 |
| QC/T 1079-2017 |
吸引压送车 |
Pulling and pumping tanker |
|
2017-4-21 |
2017-10-1 |
| QC/T 1080-2017 |
科普宣传车 |
science caravan |
|
2017-4-21 |
2017-10-1 |
| QC/T 1081-2017 |
汽车电动助力转向装置 |
Automobile electrical power streering gear |
|
2017-4-21 |
2017-10-1 |
| QC/T 1082-2017 |
汽车电动助力转向装置用电动机 |
Electromotor for automobile electrical power steering |
|
2017-4-21 |
2017-10-1 |
| QC/T 1083-2017 |
汽车电动助力转向装置用控制器 |
Controller for automobile electrical power steering |
|
2017-4-21 |
2017-10-1 |
| QC/T 1084-2017 |
汽车电动助力转向装置用传感器 |
Sensor for automobile electrical power steering |
|
2017-4-21 |
2017-10-1 |
| QC/T 1085-2017 |
摩托车轻合金车轮X射线检测 |
Light alloy wheel of motorcycle X ray testing |
|
2017-4-21 |
2017-10-1 |
| QC/T 1086-2017 |
电动汽车用增程器技术条件 |
Specifications of range extender for electrical vehicles |
|
2017-4-21 |
2017-10-1 |
| QC/T 1087-2017 |
纯电动城市环卫车技术条件 |
Specifications of city battery electric sanitation vehicles |
|
2017-4-21 |
2017-10-1 |
| QC/T 1088-2017 |
电动汽车用充放电式电机控制器技术条件 |
Specifications of charge-discharge motor controller for electric vehicles |
|
2017-4-21 |
2017-10-1 |
| QC/T 1091-2017 |
客车空气净化装置技术条件 |
Technical condition of air cleaner in passenger transport |
|
2017-4-21 |
2017-10-1 |
| QC/T 740-2017 |
乘用车座椅总成 |
Seat Assembly of Passenger Car |
全部代替：QC/T 740-2005 |
2017-4-21 |
2017-10-1 |
| QC/T 776-2017 |
旅居车 |
motor caravan |
全部代替：QC/T 776-2007 |
2017-1-9 |
2017-7-1 |
| QC/T 1051-2017 |
教练车 |
Driving school training vehicle |
|
2017-1-9 |
2017-7-1 |
| QC/T 1052-2017 |
通信车 |
Communication Van |
|
2017-1-9 |
2017-7-1 |
| QC/T 1053-2017 |
混凝土喷浆车 |
Concrete Spraying Truck |
|
2017-1-9 |
2017-7-1 |
| QC/T 1054-2017 |
隧道清洗车 |
Tunnel’s wall-cleaning vehicle |
|
2017-1-9 |
2017-7-1 |
| QC/T 1055-2017 |
排水抢险车 |
Drainage rescue vehicles |
|
2017-1-9 |
2017-7-1 |
| QC/T 218-2017 |
汽车用转向管柱上组合开关技术条件 |
Technical specification of steering column switch for vehicles |
全部代替：QC/T 218-1996 |
2017-1-9 |
2017-7-1 |
| QC/T 1056-2017 |
汽车双离合器自动变速器总成技术要求和试验方法 |
Technical requirements and testing methods for Double Clutch Transmission |
|
2017-1-9 |
2017-7-1 |
| QC/T 245-2017 |
压缩天然气汽车燃气系统技术条件 |
Technology requirements of fuel-gas system for CNG vehicles |
全部代替：QC/T 245-2002 |
2017-1-9 |
2017-7-1 |
| QC/T 247-2017 |
液化石油气汽车燃气系统技术条件 |
Technology requirements of fuel-gas system for LPG vehicles |
全部代替：QC/T 247-2002 |
2017-1-9 |
2017-7-1 |
| QC/T 1057-2017 |
汽车防滑链 |
Snow chains for vehicle |
|
2017-1-9 |
2017-7-1 |
| QC/T 1058-2017 |
汽车用指纹识别装置 |
Fingerprint recognition thief resistant automobile equipments |
|
2017-1-9 |
2017-7-1 |
| QC/T 1059-2017 |
汽车驾驶室 扭杆式翻转及锁止机构 |
Truck cab-torsion-type tilting and locking mechanism |
|
2017-1-9 |
2017-7-1 |
| QC/T 32-2017 |
汽车用空气滤清器试验方法 |
Test methods of air cleaners for automobiles |
全部代替：QC/T 32-2006 |
2017-1-9 |
2017-7-1 |
| QC/T 597.1-2017 |
螺纹紧固件预涂粘附层技术条件 第1部分：微胶囊锁固层 |
Technical conditions for threaded fasteners with adhesive coating—Part 1: Microencapsulated locking coating |
全部代替：QC/T 597-1999 |
2017-1-9 |
2017-7-1 |
| QC/T 597.2-2017 |
螺纹紧固件预涂粘附层技术条件 第2部分：聚酰胺锁紧层 |
Technical conditions for threaded fasteners with adhesive coating—Part 2: Polyamide locking coating |
|
2017-1-9 |
2017-7-1 |
| QC/T 1-2017 |
汽车产品图样的基本要求 |
General requirements for automotive product drawing |
全部代替：QC/T 1-1992 |
2017-1-9 |
2017-7-1 |
| QC/T 2-2017 |
汽车产品图样格式 |
Formats of automotive product drawing |
全部代替：QC/T 2-1992 |
2017-1-9 |
2017-7-1 |
| QC/T 3-2017 |
汽车产品图样及设计文件完整性 |
Completeness of automotive product drawing and design document |
全部代替：QC/T 3-1992 |
2017-1-9 |
2017-7-1 |
| QC/T 4-2017 |
汽车产品图样及设计文件采用与更改办法 |
Adoption and changing rules of automotive product drawing and design document |
全部代替：QC/T 4-1992 |
2017-1-9 |
2017-7-1 |
| QC/T 5-2017 |
汽车产品图样及设计文件标准化审查 |
Standardization examination of automotive product drawing and design document |
全部代替：QC/T 5-1992 |
2017-1-9 |
2017-7-1 |
| QC/T 18-2017 |
汽车产品图样及设计文件术语 |
Terminology for automotive product drawing and design document |
全部代替：QC/T 18-1992 |
2017-1-9 |
2017-7-1 |
| QC/T 340-2017 |
汽车用六角法兰承面带齿螺栓 |
Hexagon bolts with serrated flange for automobile |
全部代替：QC/T 340-1999 |
2017-1-9 |
2017-7-1 |
| QC/T 1060-2017 |
汽车用外六角花形法兰面螺栓 |
Hexalobular bolts with flange for automobile |
|
2017-1-9 |
2017-7-1 |
| QC/T 1061-2017 |
道路运输轻质燃油罐式车辆 防溢流系统 |
Road tanker for light fuel transportation- Overfill prevention systems |
|
2017-1-9 |
2017-7-1 |
| QC/T 1062-2017 |
道路运输轻质燃油罐式车辆 卸油阀 |
Road tanker for light fuel transportation-Adaptor for bottom loading and unloading |
|
2017-1-9 |
2017-7-1 |
| QC/T 1063-2017 |
道路运输轻质燃油罐式车辆 油气回收组件 |
Road tanker for light fuel transportation-Vapor recovery system |
|
2017-1-9 |
2017-7-1 |
| QC/T 1064-2017 |
道路运输易燃液体危险货物罐式车辆 呼吸阀 |
Road tanker for flammable liquid goods transportation-Pressure and vacuum breather vent |
|
2017-1-9 |
2017-7-1 |
| QC/T 1065-2017 |
道路运输易燃液体危险货物罐式车辆 人孔盖 |
Road tanker for flammable liquid goods ransportation-Manhole cover |
|
2017-1-9 |
2017-7-1 |
| QC/T 789-2017 |
汽车电涡流缓速器总成技术要求及台架试验方法 |
Technical requirements and bench test methods of automobile electric vortex retarder assembly |
全部代替：QC/T 789-2007 |
2017-1-9 |
2017-7-1 |
| QC/T 316-2017 |
汽车行车制动器疲劳强度台架试验方法 |
Automobile service brake fatigue strength bench test methods |
全部代替：QC/T 316-1999 |
2017-1-9 |
2017-7-1 |
| QC/T 201-2017 |
汽车气制动用尼龙管接头尺寸 |
Dimensions of polyamide tubing connectors for automotive air brake systems |
全部代替：QC/T 201-1995 |
2017-1-9 |
2017-7-1 |
| QC/T 1066-2017 |
汽车驻车制动用拉索总成性能要求及台架试验方法 |
Performance requirements and bench test methods for automobile parking brake cable assembly |
|
2017-1-9 |
2017-7-1 |
| QC/T 1067.1-2017 |
汽车电线束和电气设备用连接器 第1部分：定义、试验方法和一般性能要求 |
Connector used in automobile wire harness and electrical device Part1：Definition、test method and requirement |
全部代替：QC/T 417.1-2001 |
2017-1-9 |
2017-7-1 |
| QC/T 1067.2-2017 |
汽车电线束和电气设备用连接器 第2部分：插头端子的型式和尺寸 |
Connector used in automobile wire harness and electrical device Part2：Type and dimension of the male terminal |
全部代替：QC/T 417.3-2001,QC/T 417.4-2001,QC/T 417.5-2001 |
2017-1-9 |
2017-7-1 |
| QC/T 1067.3-2017 |
汽车电线束和电气设备用连接器 第3部分：电线接头的型式、尺寸和特殊要求 |
Connector used in automobile wire harness and electrical device Part3：Type、dimension and special requirement of the ring terminal |
全部代替：QCn 29010-1991,QCn 29011-1991,QCn 29013-1991 |
2017-1-9 |
2017-7-1 |
| QC/T 1068-2017 |
电动汽车用异步驱动电机系统 |
Asynchronous drive motor system for electric vehicles |
|
2017-1-9 |
2017-7-1 |
| QC/T 1069-2017 |
电动汽车用永磁同步驱动电机系统 |
Permanent magnet synchronous drive motor system for electric vehicles |
|
2017-1-9 |
2017-7-1 |
| QC/T 1070-2017 |
汽车零部件再制造产品技术规范 气缸体总成 |
The technical specification for remanufacturing of automotive components—Cylinder block assembly |
|
2017-1-9 |
2017-7-1 |
| QC/T 1071-2017 |
汽车发动机气缸盖气道稳态流动特性测试方法 |
The steady flow test method for ports characteristics of cylinder head in vehicle engines |
|
2017-1-9 |
2017-7-1 |
| QC/T 772-2017 |
汽车用柴油滤清器试验方法 |
Test methods of diesel-fuel filter for automobiles |
全部代替：QC/T 772-2006 |
2017-1-9 |
2017-7-1 |
| QC/T 771-2017 |
汽车柴油机纸质滤芯柴油细滤器总成技术条件 |
Specifications of diesel-fuel fine filter assembly with paper element for automotive diesels |
全部代替：QC/T 771-2006 |
2017-1-9 |
2017-7-1 |
| GB 4660-2016 |
机动车用前雾灯配光性能 |
Photometric characteristics of power-driven vehicle front fog lamps |
全部代替：GB 4660-2007 |
2016-12-30 |
2017-1-1 |
| GB 19152-2016 |
发射对称近光和/或远光的机动车前照灯 |
Motor vehicle headlamps emitting a symmetrical passing beam or a driving beam or both |
全部代替：GB 19152-2003 部分代替：GB 5948-1998 |
2016-12-30 |
2017-1-1 |
| GB 19260-2016 |
低地板及低入口城市客车结构要求 |
Structure requirements of low floor public bus and low entry public bus |
全部代替：GB/T 19260-2003 |
2016-12-30 |
2017-7-1 |
| GB 4094-2016 |
汽车操纵件、指示器及信号装置的标志 |
Symbols for controls, indicators and tell-tales of motor vehicles |
全部代替：GB 4094-1999 |
2016-12-30 |
2019-7-1 |
| GB/T 33438-2016 |
摩托车和轻便摩托车碰撞乘员防护试验方法 |
Test method for the crash rider protection of motorcycles and mopeds |
|
2016-12-30 |
2017-7-1 |
| GB/T 18305-2016 |
质量管理体系 汽车生产件及相关服务件组织应用GB/T 19001—2008的特别要求 |
Quality management systems—Particular requirements for the application of GB/T 19001—2008 for automotive production and relevant service part organizations |
全部代替：GB/T 18305-2003 |
2016-12-13 |
2017-7-1 |
| GB/T 33012.1-2016 |
道路车辆 车辆对窄带辐射电磁能的抗扰性试验方法 第1部分：一般规定 |
Road vehicles—Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy—Part 1: General |
|
2016-10-13 |
2017-5-1 |
| GB/T 33012.2-2016 |
道路车辆 车辆对窄带辐射电磁能的抗扰性试验方法 第2部分：车外辐射源法 |
Road vehicles—Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy—Part 2: Off-vehicle radiation sources |
|
2016-10-13 |
2017-5-1 |
| GB/T 33012.3-2016 |
道路车辆 车辆对窄带辐射电磁能的抗扰性试验方法 第3部分：车载发射机模拟法 |
Road vehicles—Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy—Part 3: On-board transmitter simulation |
|
2016-10-13 |
2017-5-1 |
| GB/T 33012.4-2016 |
道路车辆 车辆对窄带辐射电磁能的抗扰性试验方法 第4部分：大电流注入法 |
Road vehicles—Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy—Part 4: Bulk current injection(BCI) |
|
2016-10-13 |
2017-5-1 |
| GB/Z 33013-2016 |
道路车辆 车用嵌入式软件开发指南 |
Road vehicles—Development guidelines for motor vehicle embedded software |
|
2016-10-13 |
2017-1-1 |
| GB/T 33014.1-2016 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第1部分：一般规定 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 1: General |
|
2016-10-13 |
2017-11-1 |
| GB/T 33014.2-2016 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第2部分：电波暗室法 |
Road vehicles—Component test methods for electrical /electronic disturbances from narrowband radiated electromagnetic energy—Part 2: Absorber-lined shielded enclosure |
|
2016-10-13 |
2017-11-1 |
| GB/T 33014.3-2016 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第3部分：横电磁波（TEM）小室法 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 3: Transverse electromagnetic（TEM）cell |
|
2016-10-13 |
2017-11-1 |
| GB/T 33014.4-2016 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第4部分：大电流注入（BCI）法 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 4: Bulk current injection (BCI) |
|
2016-10-13 |
2017-11-1 |
| GB/T 33014.5-2016 |
道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第5部分：带状线法 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 5: Stripline |
|
2016-10-13 |
2017-11-1 |
| GB/T 32960.1-2016 |
电动汽车远程服务与管理系统技术规范 第1部分：总则 |
Technical specifications of remote service and management system for electric vehicles—Part 1: General principle |
|
2016-8-29 |
2016-10-1 |
| GB/T 32960.2-2016 |
电动汽车远程服务与管理系统技术规范 第2部分：车载终端 |
Technical specifications of remote service and management system for electric vehicles--Part 2: On-board terminal |
|
2016-8-29 |
2016-10-1 |
| GB/T 32960.3-2016 |
电动汽车远程服务与管理系统技术规范 第3部分：通信协议及数据格式 |
Technical specifications of remote service and management system for electric vehicles—Part 3: Communication protocol and data format |
|
2016-8-29 |
2016-10-1 |
| GB 1589-2016 |
汽车、挂车及汽车列车外廓尺寸、 轴荷及质量限值 |
Limits of dimensions, axle load and masses for motor vehicles,trailers and combination vehicles |
全部代替：GB 1589-2004 |
2016-7-26 |
2016-7-26 |
| GB/T 26774-2016 |
车辆运输车通用技术条件 |
Technical specification for car carriers |
全部代替：GB/T 26774-2011 |
2016-7-26 |
2016-7-26 |
| GB/T 32860-2016 |
道路车辆 牵引杆连接器的互换性 |
Road vehicles—Drawbar couplings of interchangeability |
|
2016-7-26 |
2016-7-26 |
| GB/T 32861-2016 |
道路车辆 牵引车与挂车之间的电气和气动连接位置 |
Road vehicles—Location of electrical and pneumatic connections between towing vehicles and trailers |
|
2016-7-26 |
2016-7-26 |
| GB/T 12548-2016 |
汽车速度表、里程表检验校正方法 |
Motor vehicles speedometer and odometer calibration method |
全部代替：GB/T 12548-1990 |
2016-6-14 |
2017-1-1 |
| GB/T 32691-2016 |
汽车空调电磁离合器 |
Automobile A/C electromagnetic clutch |
|
2016-6-14 |
2017-1-1 |
| GB/T 32692-2016 |
商用车辆缓速制动系统性能试验方法 |
Performance test methods for endurance braking systems of commercial vehicles |
|
2016-6-14 |
2017-1-1 |
| GB/T 32694-2016 |
插电式混合动力电动乘用车 技术条件 |
Plug-in hybrid electric passenger cars—Specifications |
|
2016-6-14 |
2017-1-1 |
| QC/T 1031-2016 |
摩托车和轻便摩托车车轮花键套 |
Boss center of motorcycles and mopeds wheels |
|
2016-4-5 |
2016-9-1 |
| QC/T 753-2016 |
摩托车和轻便摩托车技术参数表格式 |
Motorcycles and mopeds—The format of technical parameters |
全部代替：QC/T 753-2006 |
2016-4-5 |
2016-9-1 |
| QC/T 1032-2016 |
摩托车和轻便摩托车发动机凸轮轴 |
Camshaft of engine for motorcycles and mopeds |
|
2016-4-5 |
2016-9-1 |
| QC/T 681-2016 |
摩托车和轻便摩托车用起动继电器技术条件 |
Starting relay for motorcycles and mopeds |
全部代替：QC/T 681-2002 |
2016-4-5 |
2016-9-1 |
| QC/T 687-2016 |
摩托车和轻便摩托车发动机气缸体技术条件 |
Technical specifications of engine cylinder block for motorcycles and mopeds |
全部代替：QC/T 687-2002 |
2016-4-5 |
2016-9-1 |
| QC/T 224-2016 |
摩托车和轻便摩托车发动机通用技术条件 |
Specifications of Engine used in Motorcycles and Mopeds |
全部代替：QC/T 224-2007 |
2016-4-5 |
2016-9-1 |
| QC/T 228-2016 |
摩托车和轻便摩托车操纵拉索 |
Controlling cables for motorcycles and mopeds |
全部代替：QC/T 228.1-1997,QC/T 228.2-1997,QC/T 228.3-1997,QC/T 228.4-1997,QC/T 228.5-1997,QC/T 228.6-1997,QC/T 228.7-1997,QC/T 228.8-1997,QC/T 228.9-1997,QC/T 228.10-1997 |
2016-4-5 |
2016-9-1 |
| QC/T 1033-2016 |
气压制动器 外置式间隙自动调节装置技术要求及台架试验方法 |
Air brake - Performance requirements and bench test methods of external automatic brake adjuster |
|
2016-4-5 |
2016-9-1 |
| QC/T 1034-2016 |
汽车交流发电机用整流桥 |
Automotive alternator rectifier |
|
2016-4-5 |
2016-9-1 |
| QC/T 1035-2016 |
汽车发动机用电子节气门体 |
Electronic throttle body for motor vehicles |
|
2016-4-5 |
2016-9-1 |
| QC/T 1036-2016 |
汽车电源逆变器 |
Automotive DC-AC Power Inverter |
|
2016-4-5 |
2016-9-1 |
| QC/T 1037-2016 |
道路车辆用高压电缆 |
High voltage Cables for road vehicle |
|
2016-4-5 |
2016-9-1 |
| QC/T 1038-2016 |
汽车用发光二极管(LED)及模组 |
Light-emitting diodes（LED）and modules for automotive |
|
2016-4-5 |
2016-9-1 |
| QC/T 1039-2016 |
汽车空调用阳光传感器 |
Solar Sensor For Automotive Air-Conditioning |
|
2016-4-5 |
2016-9-1 |
| QC/T 16-2016 |
汽车用点火线圈 |
Specification for vehicle ignition coil |
全部代替：QC/T 16-1992 |
2016-4-5 |
2016-9-1 |
| QC/T 414-2016 |
汽车电线（电缆）的颜色规定和型号编制方法 |
Design rule of color and type code for automotive cables |
全部代替：QC/T 414-1999,QC/T 730-2005 |
2016-4-5 |
2016-9-1 |
| QC/T 415-2016 |
汽车用点烟器及点烟器座式电源插座 |
Cigarette lighter and power socket for automobile |
全部代替：QC/T 415-1999 |
2016-4-5 |
2016-9-1 |
| QC/T 1040-2016 |
摩托车和轻便摩托车电动燃油泵 |
Electrical Fuel Pump for Motorcycle and Moped |
|
2016-4-5 |
2016-9-1 |
| QC/T 1041-2016 |
摩托车和轻便摩托车燃油蒸发污染物控制系统（装置）技术要求 |
Control system of fuel evaporative pollutants from Motorcycles with petrol engine |
|
2016-4-5 |
2016-9-1 |
| QC/T 688-2016 |
摩托车和轻便摩托车通用技术条件 |
General Specifications of Motorcycles and Mopeds |
全部代替：QC/T 688-2007 |
2016-4-5 |
2016-9-1 |
| QC/T 724-2016 |
摩托车和轻便摩托车直流信号闪光器技术条件 |
Specification for direct current flasher unit of motorcycles and mopeds |
全部代替：QC/T 724-2004 |
2016-4-5 |
2016-9-1 |
| QC/T 1042-2016 |
摩托车和轻便摩托车振动舒适性试验方法 |
Measurement method for Vibration Comfort of Motorcycles and Mopeds |
|
2016-4-5 |
2016-9-1 |
| QC/T 752-2016 |
摩托车和轻便摩托车催化转化器试验方法 |
Testing Methods for Catalytic Converters of Motorcycles and Mopeds |
全部代替：QC/T 752-2006,QC/T 751-2006 |
2016-4-5 |
2016-9-1 |
| QC/T 1043-2016 |
汽车燃油系统用尼龙管 |
Automotive Fuel System Nylon Tube |
|
2016-4-5 |
2016-9-1 |
| QC/T 1044-2016 |
汽车用脚踏垫 |
Automotive floor mat |
|
2016-4-5 |
2016-9-1 |
| QC/T 1045-2016 |
汽车管路保护用热收缩管 |
Heat-shrinkable tubing for automotive pipe |
|
2016-4-5 |
2016-9-1 |
| QC/T 29089-2016 |
汽车用PVC/ABS真空吸塑仪表板表皮 |
PVC/ABS Vacuum Forming Skin for Automotive Instrument Panel |
全部代替：QC/T 29089-1992 |
2016-4-5 |
2016-9-1 |
| QC/T 29078-2016 |
汽车用空气压缩机性能要求及台架试验方法 |
Performance requirements and bench test methods of vehicle air compressor |
全部代替：QC/T 29078-1992 |
2016-4-5 |
2016-9-1 |
| QC/T 307-2016 |
汽车用真空助力器性能要求及台架试验方法 |
Performance requirements and bench test methods of vacuum booster for automobile |
全部代替：QC/T 307-1999 |
2016-4-5 |
2016-9-1 |
| QC/T 1046-2016 |
商用车辆后置液力缓速器性能要求及台架试验方法 |
Performance requirements and bench tese methods for commercial vehicle secondary hydraulic retarder |
|
2016-4-5 |
2016-9-1 |
| QC/T 469-2016 |
汽车发动机气门技术条件 |
Automobile engine valve Specification |
全部代替：QC/T 469-2002 |
2016-4-5 |
2016-9-1 |
| QC/T 1047-2016 |
城市客车塑料座椅 |
The plastic seats for city buses |
|
2016-4-5 |
2016-9-1 |
| QC/T 1048-2016 |
客车应急锤 |
Bus emergency hammer |
|
2016-4-5 |
2016-9-1 |
| QC/T 1049-2016 |
汽车齿轮齿条式液压助力转向系统匹配技术要求和试验方法 |
Technical requirements and test methods of automotive rack and pinion hydraulic power steering system matching |
|
2016-4-5 |
2016-9-1 |
| QC/T 1050-2016 |
乘用车双质量飞轮技术要求及试验方法 |
Technical specification and test measurements of dual mass flywheel for passenger cars |
|
2016-4-5 |
2016-9-1 |
| QC/T 1025-2016 |
自动变速器油泵性能要求及台架试验方法 |
Preformance requirements and bench test methods of automatic transmission oil pump |
|
2016-1-15 |
2016-7-1 |
| QC/T 1026-2016 |
汽车聚氯乙烯搪塑仪表板表皮性能及检测 |
Performance and Determination of PVC Slush Skin of Automotive Instrument Panel |
|
2016-1-15 |
2016-7-1 |
| QC/T 1027-2016 |
汽车贴膜玻璃技术要求 |
Technical requirements for film mounted motor vehicle glass |
|
2016-1-15 |
2016-7-1 |
| QC/T 1028-2016 |
汽车真空单向阀性能要求及试验方法 |
Performance requirements and test methods of vehicle vacuum check valve |
|
2016-1-15 |
2016-7-1 |
| QC/T 1029-2016 |
汽车用聚丙烯蜂窝板制品 |
|
|
2016-1-15 |
2016-7-1 |
| QC/T 1030-2016 |
客车外推式应急窗 |
Bus push-out emergency window |
|
2016-1-15 |
2016-7-1 |
| QC/T 678-2016 |
客车乘客门门泵 |
Passenger door pump for bus |
全部代替：QC/T 678-2001 |
2016-1-15 |
2016-7-1 |
| GB 20997-2015 |
轻型商用车辆燃料消耗量限值 |
Limits of fuel consumption for light duty commercial vehicles |
全部代替：GB 20997-2007 |
2015-12-31 |
2018-1-1 |
| GB/T 20234.1-2015 |
电动汽车传导充电用连接装置 第1部分：通用要求 |
Connection set of conductive charging for electric vehicles—Part 1: General requirements |
全部代替：GB/T 20234.1-2011 |
2015-12-28 |
2016-1-1 |
| GB/T 20234.2-2015 |
电动汽车传导充电用连接装置 第2部分：交流充电接口 |
Connection set for conductive charging of electric vehicles—Part 2: AC charging coupler |
全部代替：GB/T 20234.2-2011 |
2015-12-28 |
2016-1-1 |
| GB/T 20234.3-2015 |
电动汽车传导充电用连接装置 第3部分：直流充电接口 |
Connection set for conductive charging of electric vehicles—Part 3: DC charging coupler |
全部代替：GB/T 20234.3-2011 |
2015-12-28 |
2016-1-1 |
| QC/T 1014-2015 |
汽车、摩托车起动电机用换向器 |
The starting motor commutator for Automobile and motorcycle |
|
2015-10-10 |
2016-3-1 |
| QC/T 1015-2015 |
汽车空调控制器 |
Automotive air conditioner controller |
|
2015-10-10 |
2016-3-1 |
| QC/T 1016-2015 |
乘用车门内饰板总成 |
Door trim panel assembly for passenger cars |
|
2015-10-10 |
2016-3-1 |
| QC/T 1017-2015 |
汽车用前照灯清洗喷嘴总成 |
Headlamp cleaning nozzle assembly |
|
2015-10-10 |
2016-3-1 |
| QC/T 1018-2015 |
汽车用踏步板 |
Step Plate for Automotive |
|
2015-10-10 |
2016-3-1 |
| QC/T 1019-2015 |
汽车变速换档操纵装置性能要求及台架试验方法 |
Performance requirements and bench test methods of automobile gear shifting control device |
|
2015-10-10 |
2016-3-1 |
| QC/T 1020-2015 |
汽车等速万向节及其总成试验方法 |
Test methods for constant velocity universal joint and assemblies for Automobiles |
|
2015-10-10 |
2016-3-1 |
| QC/T 1021-2015 |
汽车独立悬架球头销总成性能要求及台架试验方法 |
Perfomance requirements and bench test methods of ball stud assy of automotive suspension |
|
2015-10-10 |
2016-3-1 |
| QC/T 648-2015 |
汽车转向拉杆总成性能要求及台架试验方法 |
Performance requirements and bench test methods of automotive steering tie rod assy |
全部代替：QC/T 304-1999,QC/T 648-2000,QC/T 650-2000 |
2015-10-10 |
2016-3-1 |
| QC/T 1022-2015 |
纯电动乘用车用减速器总成技术条件 |
Technical specification for reduction gearbox of battery electric passenger cars |
|
2015-10-10 |
2016-3-1 |
| QC/T 1023-2015 |
电动汽车用动力蓄电池系统通用要求 |
General Requirement of Traction Battery System for Electric Vehicles |
|
2015-10-10 |
2016-3-1 |
| QC/T 1024-2015 |
汽车用单组分聚氨酯密封胶 |
One- part Polyurethane Sealant |
|
2015-10-10 |
2016-3-1 |
| GB 18408-2015 |
汽车及挂车后牌照板照明装置配光性能 |
photometric characteristics of devices for the illumination of rear registration plates of motor vehicles and their trailers |
全部代替：GB 18408-2001 |
2015-10-9 |
2016-7-1 |
| GB/T 32085.1-2015 |
汽车 空调滤清器 第1部分：粉尘过滤测试 |
Automobiles—Cabin air filter—Part 1: Test for particulate filtration |
|
2015-10-9 |
2016-3-1 |
| GB/T 32085.2-2015 |
汽车 空调滤清器 第2部分：气体过滤测试 |
Automobiles—Cabin air filter—Part 2: Test for gas filtration |
|
2015-10-9 |
2016-3-1 |
| GB/T 32086-2015 |
特定种类汽车内饰材料垂直燃烧特性技术要求和试验方法 |
Requirement of Vertical Flammability Characteristic and Test Method for Certain Category Automobile Interior Material |
|
2015-10-9 |
2016-7-1 |
| GB 32087-2015 |
轻型汽车牵引装置 |
Towing devices for light-duty vehicle |
|
2015-10-9 |
2016-7-1 |
| GB/T 32088-2015 |
汽车非金属部件及材料氙灯加速老化试验方法 |
Accelerated weathering test methods of automotive nonmetal components and materials using a xenon-arc apparatus |
|
2015-10-9 |
2016-4-1 |
| GB/T 5921-2015 |
汽车和挂车 气压制动系 部件上接口的识别标记 |
Motor vehicles and towed vehicles—Air braking systems—Identification of connections on units |
全部代替：GB/T 5921-1986 |
2015-9-11 |
2016-1-1 |
| GB/T 13873-2015 |
道路车辆 货运挂车试验方法 |
Road vechiles—Trailer test procedure |
全部代替：GB/T 13873-2009 |
2015-9-11 |
2015-12-1 |
| GB/T 19515-2015 |
道路车辆 可再利用率和可回收利用率 计算方法 |
Road vehicles—Recyclability and recoverability—Calculation method |
全部代替：GB/T 19515-2004 |
2015-9-11 |
2015-12-1 |
| GB/T 31879-2015 |
道路车辆 牵引座通用技术条件 |
Road vehicles—General technical requirements for fifth wheel |
|
2015-9-11 |
2015-12-1 |
| GB/T 31881-2015 |
汽车非金属部件及材料紫外加速老化试验方法 |
Accelerated weathering test methods of automotive nonmetal components and materials using a fluorescent UV and condensation apparatus |
|
2015-9-11 |
2015-12-1 |
| GB/T 31883-2015 |
道路车辆 牵引连接件、牵引杆孔、牵引座牵引销、连接钩及环形孔 机械连接件使用磨损极限 |
Road vehicles—Drawbar couplings, drawbar eyes ,fifth wheel kingpins ,hook couplings and toroidal eyes—Wear limits for in-use mechanical couplings |
|
2015-9-11 |
2015-12-1 |
| GB/T 31970-2015 |
汽车用气压制动卡钳总成性能要求及台架试验方法 |
Performance requirements and bench test methods for air brake caliper assemble of automobile |
|
2015-9-11 |
2016-1-1 |
| GB/T 31973-2015 |
汽车非金属材料及部件自然曝露试验方法 |
Natural weathering exposure tests for automotive non-metallic materials and parts |
|
2015-9-11 |
2016-1-1 |
| QC/T 1002-2015 |
摩托车和轻便摩托车台架耐久性试验方法 |
Test method of durability in CH-DY for motorcycles and mopeds |
|
2015-7-14 |
2016-1-1 |
| QC/T 1003-2015 |
摩托车金属载体催化转化器贵金属含量的测定方法 |
Determination of precious metal in metal support catalytic converter for motorcycles |
|
2015-7-14 |
2016-1-1 |
| QC/T 1004-2015 |
汽车电动真空泵性能要求及台架试验方法 |
Preformance requirements and bench test methods of automobile electric vacuum pump |
|
2015-7-14 |
2016-1-1 |
| QC/T 200-2015 |
汽车和挂车气压制动装置用储气筒性能要求及试验方法 |
Performance requirements and test methods of reservoir for air brake equipment of automobile and trailer |
全部代替：QC/T 200-1995 |
2015-7-14 |
2016-1-1 |
| QC/T 35-2015 |
汽车和挂车 气压控制装置技术要求及台架试验方法 |
Automobile and trailer — Specifications and bench test methods of pressure control equipment |
全部代替：QC/T 35-1992,QC/T 36-1992 |
2015-7-14 |
2016-1-1 |
| QC/T 37-2015 |
汽车与挂车 气压调节保护装置技术要求及台架试验方法 |
Automobile and trailer－Specifications and test methods of bench for pressure regulator and protector |
全部代替：QC/T 37-1992,QC/T 38-1992 |
2015-7-14 |
2016-1-1 |
| QC/T 77-2015 |
汽车液压制动轮缸技术要求及台架试验方法 |
Specifications and bench test methods of automobile hydraulic brake wheel cylinder |
全部代替：QC/T 77-1993 |
2015-7-14 |
2016-1-1 |
| QC/T 1005-2015 |
汽车防抱制动系统液压电磁调节器技术要求及台架试验方法 |
Specifications and bench test methods of automobile antilock braking system electromagnetic-hydraulic modulator |
|
2015-7-14 |
2016-1-1 |
| QC/T 1006-2015 |
汽车防抱制动系统气压电磁调节器技术要求及台架试验方法 |
Specifications and bench test methods of automobile antilock braking system solenoid modulator for pneumatic |
|
2015-7-14 |
2016-1-1 |
| QC/T 1007-2015 |
汽车用燃油滤清器过滤性能的评定 颗粒计数法 |
Evaluating filtration performance of fuel filters for automobiles—Method of particle counting |
|
2015-7-14 |
2016-1-1 |
| QC/T 1008-2015 |
油箱通风用过滤器技术条件 |
Specifications of tank ventilation filters |
|
2015-7-14 |
2016-1-1 |
| QC/T 1009-2015 |
乘用车自动变速器用过滤器技术条件 |
Specifications of passenger car automatic transmission filters |
|
2015-7-14 |
2016-1-1 |
| QC/T 1010-2015 |
离合器液压气助力系统助力器技术要求和台架试验方法 |
Technical Requirements and Bench Test Methods for Hydraulic Air-assistant System Booster of Clutch |
|
2015-7-14 |
2016-1-1 |
| QC/T 1011-2015 |
离合器液压气助力系统总泵技术要求和台架试验方法 |
Technical Requirements and Bench Test Methods for Hydraulic Air-assistant System Master Cylinder of Clutch |
|
2015-7-14 |
2016-1-1 |
| QC/T 1012-2015 |
汽车液压助力转向系统清洁度技术要求及测定方法 |
Technical requirements and determination for motor vehicles-hydraulic power steering system cleanliness |
|
2015-7-14 |
2016-1-1 |
| QC/T 1013-2015 |
转向器输入轴用旋转轴唇形密封圈技术要求和试验方法 |
Technical requirement and test method for rotary shaft lip-type seals of steering input shaft |
|
2015-7-14 |
2016-1-1 |
| GB/T 31848-2015 |
汽车贴膜玻璃 贴膜要求 |
Film mounted motor vehicle glass—Requirements for mounting |
|
2015-7-3 |
2016-6-1 |
| GB/T 31849-2015 |
汽车贴膜玻璃 |
Film mounted motor vehicle glass |
|
2015-7-3 |
2016-6-1 |
| GB/T 18384.1-2015 |
电动汽车 安全要求 第1部分：车载可充电储能系统(REESS) |
Electrically propelled road vehicles—Safety specifications—Part 1: On-board rechargeable energy storage system(REESS) |
全部代替：GB/T 18384.1-2001 |
2015-5-15 |
2015-10-1 |
| GB/T 18384.2-2015 |
电动汽车 安全要求 第2部分：操作安全和故障防护 |
Electrically propelled road vehicles—Safety specifications—Part 2: Vehicle operational safety means and protection against failures |
全部代替：GB/T 18384.2-2001 |
2015-5-15 |
2015-10-1 |
| GB/T 18384.3-2015 |
电动汽车 安全要求 第3部分：人员触电防护 |
Electrically propelled road vehicles—Safety specifications—Part 3: Protection of persons against electric shock |
全部代替：GB/T 18384.3-2001 |
2015-5-15 |
2015-10-1 |
| GB/T 31498-2015 |
电动汽车碰撞后安全要求 |
The safety requirement of electric vehicle post crash |
|
2015-5-15 |
2015-10-1 |
| GB/T 31465.1-2015 |
道路车辆 熔断器 第1部分：定义和通用试验要求 |
Road vehicles—Fuse-link—Part 1: Definitions and general test requirements |
|
2015-5-15 |
2015-12-1 |
| GB/T 31465.2-2015 |
道路车辆 熔断器 第2部分：用户指南 |
Road vehicles—Fuse-link—Part 2: User,s guide |
|
2015-5-15 |
2015-12-1 |
| GB/T 31465.3-2015 |
道路车辆 熔断器 第3部分：片式熔断器 |
Road vehicles—Fuse-link—Part 3: Fuse-link with blade type |
|
2015-5-15 |
2015-12-1 |
| GB/T 31465.4-2015 |
道路车辆 熔断器 第4部分：插座式和螺栓式熔断器 |
Road vehicles—Fuse-link—Part 4: Fuse-links with female contacts and bolt-in contacts |
|
2015-5-15 |
2015-12-1 |
| GB/T 31465.5-2015 |
道路车辆 熔断器 第5部分：板型熔断器 |
RRoad vehicles—Fuse-link—Part 5: Fuse links with axial terminals (strip fuse-links) |
|
2015-5-15 |
2015-12-1 |
| GB/T 31466-2015 |
电动汽车高压系统电压等级 |
Voltage ratings of electric vehicles high voltage electricity system |
|
2015-5-15 |
2015-12-1 |
| GB/T 31467.1-2015 |
电动汽车用锂离子动力蓄电池包和系统 第1部分：高功率应用测试规程 |
Lithium-ion traction battery pack and system for Electric vehicles—Part 1: Test specification for High power applications |
|
2015-5-15 |
2015-5-15 |
| GB/T 31467.2-2015 |
电动汽车用锂离子动力蓄电池包和系统 第2部分：高能量应用测试规程 |
Lithium-ion traction battery pack and system for Electric vehicles—Part 2: Test specification for High energy applications |
|
2015-5-15 |
2015-5-15 |
| GB/T 31467.3-2015 |
电动汽车用锂离子动力蓄电池包和系统 第3部分：安全性要求与测试方法 |
Lithium-ion traction battery pack and system for Electric vehicles—Part 3: Safety requirements and test methods |
|
2015-5-15 |
2015-5-15 |
| GB/T 31484-2015 |
电动汽车用动力蓄电池循环寿命要求及试验方法 |
Cycle life requirements and test methods for traction battery of electric vehicle |
|
2015-5-15 |
2015-5-15 |
| GB/T 31485-2015 |
电动汽车用动力蓄电池安全要求及试验方法 |
Safety requirements and test methods for traction battery of electric vehicle |
|
2015-5-15 |
2015-5-15 |
| GB/T 31486-2015 |
电动汽车用动力蓄电池电性能要求及试验方法 |
Electrical performance requirements and test methods for traction battery of electric vehicle |
|
2015-5-15 |
2015-5-15 |
| GB/T 19754-2015 |
重型混合动力电动汽车能量消耗量试验方法 |
Test methods for energy consumption of heavy-duty hybrid electric vehicles |
全部代替：GB/T 19754-2005 |
2015-5-15 |
2015-10-1 |
| QC/T 991-2015 |
乘用车 轻合金车轮90°冲击试验方法 |
Passenger cars—Light alloy wheels—90°impact test procedure |
|
2015-4-30 |
2015-10-1 |
| QC/T 717-2015 |
汽车车轮跳动要求和检测方法 |
Road vehicle -Wheels- Requirements and Measuring methods of radial and lateral run-out |
全部代替：QC/T 717-2004 |
2015-4-30 |
2015-10-1 |
| QC/T 52-2015 |
垃圾车 |
Refuse collection vehicle |
全部代替：QC/T 52-2000 |
2015-4-30 |
2015-10-1 |
| QC/T 652-2015 |
吸污车 |
Suction-type sewer scavenger |
全部代替：QC/T 652-2000 |
2015-4-30 |
2015-10-1 |
| QC/T 992-2015 |
市政工程救险车 |
Municipal emergency service vehicle |
|
2015-4-30 |
2015-10-1 |
| QC/T 993-2015 |
爆炸物品运输车 |
Explosive transport vehicle |
|
2015-4-30 |
2015-10-1 |
| QC/T 994-2015 |
背罐车 |
Demountable tanker carrier |
|
2015-4-30 |
2015-10-1 |
| QC/T 995-2015 |
液压驱动模块运输车 |
Hydrostatic drive modular transporter |
|
2015-4-30 |
2015-10-1 |
| QC/T 764-2015 |
道路车辆 液压制动系统 单喇叭口金属管、螺纹孔、螺纹接头及软管端部接头 |
Road vehicles—Hydraulic braking system—Simple flare pipes,tube tapped holes male fittings and hose end fittings |
全部代替：QC/T 764-2006 |
2015-4-30 |
2015-10-1 |
| QC/T 239-2015 |
商用车辆行车制动器技术要求及台架试验方法 |
Specifications and bench test methods for commercial vehicle service brake |
全部代替：QC/T 239-1997,QC/T 479-1999 |
2015-4-30 |
2015-10-1 |
| QC/T 996-2015 |
汽车空气干燥器技术要求及台架试验方法 |
Specifiations and bench test methods of automobile air dryer |
|
2015-4-30 |
2015-10-1 |
| QC/T 997-2015 |
客车全承载整体框架式车身结构要求 |
Structural requirements of integral body for buses |
|
2015-4-30 |
2015-10-1 |
| QC/T 998-2015 |
汽车空调滤清器技术条件 |
Automobiles - Cabin Air Filter - Technical Specification |
|
2015-4-30 |
2015-10-1 |
| QC/T 999-2015 |
汽车用分流式机油滤清器总成技术条件 |
Specification of by-pass luboil filter assembly for automobiles |
|
2015-4-30 |
2015-10-1 |
| QC/T 1000.1-2015 |
汽车滤清器用非织布性能要求和测试方法 第1部分：乘驾室空气滤清器用 |
Performance Requirements and Test Methods of Non-woven on Automotive Filter Part 1:Non-woven of filters for passenger Compartment |
|
2015-4-30 |
2015-10-1 |
| QC/T 1000.2-2015 |
汽车滤清器用非织布性能要求和测试方法 第2部分：空气滤清器用 |
Performance Requirements and Test Methods of Non-woven on Automotive Filter Part 2:Non-woven filters for Air Filter |
|
2015-4-30 |
2015-10-1 |
| QC/T 1001-2015 |
汽车用机油滤清器过滤性能的评定 颗粒计数法 |
Evaluating filtration performance of lubricating oil filters for automobiles — Method of particle counting |
|
2015-4-30 |
2015-10-1 |
| GB/T 18333.2-2015 |
电动汽车用锌空气电池 |
Zinc-air batteries for electric road vehicle |
全部代替：GB/Z 18333.2-2001 |
2015-2-4 |
2015-9-1 |
| GB/T 18488.1-2015 |
电动汽车用驱动电机系统 第1部分：技术条件 |
Drive motor system for electric vehicles—Part 1: Specification |
全部代替：GB/T 18488.1-2006 |
2015-2-4 |
2015-9-1 |
| GB/T 18488.2-2015 |
电动汽车用驱动电机系统 第2部分：试验方法 |
Drive motor system for electric vehicles—Part 2: Test methods |
全部代替：GB/T 18488.2-2006 |
2015-2-4 |
2015-9-1 |
| QC/T 501-2015 |
汽车信号闪光器 |
Technical Requirements for the Automotive Electronic Flasher |
全部代替：QC/T 501-1999 |
2015-1-1 |
2015-7-1 |
| GB 11562-2014 |
汽车驾驶员前方视野要求及测量方法 |
Motor vehicles-forward visibility for drivers-requirements and measurement methods |
全部代替：GB 11562-1994 |
2014-12-31 |
2015-7-1 |
| GB/T 30677-2014 |
轻型汽车电子稳定性控制系统性能要求及试验方法 |
Performance requirements and testing methods for electronic stability control system(ESC) for light vehicles |
|
2014-12-31 |
2015-7-1 |
| GB 30678-2014 |
客车用安全标志和信息符号 |
Safety signs and information symbols for the use of bus |
|
2014-12-31 |
2015-7-1 |
| GB 19578-2014 |
乘用车燃料消耗量限值 |
Fuel consumption limits for passenger cars |
全部代替：GB 19578-2004 |
2014-12-22 |
2016-1-1 |
| GB 27999-2014 |
乘用车燃料消耗量评价方法及指标 |
Fuel consumption evaluation methods and targets for passenger cars |
全部代替：GB 27999-2011 |
2014-12-22 |
2016-1-1 |
| QC/T 989-2014 |
电动汽车用动力蓄电池箱通用要求 |
General Requirement of Traction Battery Enclosure for Electric Vehicles |
|
2014-10-14 |
2015-4-1 |
| QC/T 986-2014 |
车用空调冷凝水雾化装置 |
ATOMIZING SPRAY PUMP FOR VEHICLE AIR-CONDITIONING SYSTEM |
|
2014-10-14 |
2015-4-1 |
| QC/T 987-2014 |
汽车安全带卷收器性能要求和试验方法 |
Motor vehicles—Safety belts retractor —Performance requirements and test methods |
|
2014-10-14 |
2015-4-1 |
| QC/T 988-2014 |
汽车车门外拉手 |
Vehicle door outside handle |
|
2014-10-14 |
2015-4-1 |
| QC/T 804-2014 |
乘用车仪表板总成和副仪表板总成 |
Instrument panel assembly and Console assembly for passenger cars |
全部代替：QC/T 804-2008 |
2014-10-14 |
2015-4-1 |
| QC/T 628-2014 |
汽车用带点火开关的转向锁 |
Steering lock with ignition switch for vehicle |
全部代替：QC/T 628-1999 |
2014-10-14 |
2015-4-1 |
| QC/T 430-2014 |
道路车辆 火花塞产品型号编制方法 |
Road vehicles Editorial nominating method for the type designation of spark-plugs |
全部代替：QC/T 430-2005 |
2014-10-14 |
2015-4-1 |
| QC/T 741-2014 |
车用超级电容器 |
Ultra-capacitor for Electric Vehicles |
全部代替：QC/T 741-2006 |
2014-10-14 |
2015-4-1 |
| QC/T 973-2014 |
摩托车和轻便摩托车车轮缓冲块 |
Buffering chunk of motorcycles and mopeds wheels |
|
2014-10-14 |
2015-4-1 |
| QC/T 974-2014 |
正三轮摩托车和正三轮轻便摩托车货箱技术条件 |
Specifications of carriage for three-wheeled motorcycles and mopeds |
|
2014-10-14 |
2015-4-1 |
| QC/T 975-2014 |
正三轮摩托车和正三轮轻便摩托车驱动桥 |
Driving axle for right three-wheeled motorcycles and mopeds |
|
2014-10-14 |
2015-4-1 |
| QC/T 976-2014 |
摩托车和轻便摩托车车轮缓冲套 |
Buffering cover of motorcycles and mopeds wheels |
|
2014-10-14 |
2015-4-1 |
| QC/T 977-2014 |
汽车电子油门踏板总成技术条件 |
Specification for automotive electrical accelerator pedal module |
|
2014-10-14 |
2015-4-1 |
| QC/T 978-2014 |
汽车起动机用辅助控制继电器技术条件 |
Relay for Automobile Starters Specification |
|
2014-10-14 |
2015-4-1 |
| QC/T 979-2014 |
汽车电气电子设备防护用防水透气组件 |
Waterproof vent device for protecting automotive electrical and electronics equipment |
|
2014-10-14 |
2015-4-1 |
| QC/T 980-2014 |
煤炭运输车辆 |
Coal transport vehicle |
|
2014-10-14 |
2015-4-1 |
| QC/T 23-2014 |
鲜奶运输车辆 |
Milk Tanker |
全部代替：QC/T 23-1992 |
2014-10-14 |
2015-4-1 |
| QC/T 981-2014 |
汽车车轮 表面油漆涂层 |
Wheels for motor vehicles — Surface paint coatings |
|
2014-10-14 |
2015-4-1 |
| QC/T 240-2014 |
辐板式车轮在轮毂上安装尺寸的检验方法 |
Disc Wheels—Measuremtent Methods for Dimensional Characteristics of Attachment on Hub |
全部代替：QC/T 240-1997 |
2014-10-14 |
2015-4-1 |
| QC/T 242-2014 |
汽车车轮静不平衡量要求及检测方法 |
Static unbalance requirements and test methods of vehicle wheels |
全部代替：QC/T 242-2004 |
2014-10-14 |
2015-4-1 |
| QC/T 25-2014 |
汽车干摩擦式离合器总成技术条件 |
Technical Specification 0f Automobile Clutch |
全部代替：QC/T 25-2004 |
2014-10-14 |
2015-4-1 |
| QC/T 27-2014 |
汽车干摩擦式离合器总成台架试验方法 |
Bench Test Method of Automobile Clutch |
全部代替：QC/T 27-2004 |
2014-10-14 |
2015-4-1 |
| QC/T 982-2014 |
汽车变速器齿轮激光焊接和电子束焊接技术规范 |
The specification of laser and electron beam welding for automobile transmission gear |
|
2014-10-14 |
2015-4-1 |
| QC/T 983-2014 |
汽车机械式变速器总成清洁度检测方法 |
Measuring method of cleanliness of automobile manual transmission assembly |
|
2014-10-14 |
2015-4-1 |
| QC/T 984-2014 |
汽车玻璃零配安装要求 |
Automotive Glass Replacement Requirement |
|
2014-10-14 |
2015-4-1 |
| QC/T 985-2014 |
汽车热反射镀膜夹层前风窗玻璃 |
Solar reflective coated laminated automotive windshield |
|
2014-10-14 |
2015-4-1 |
| GB 13057-2014 |
客车座椅及其车辆固定件的强度 |
The strength of the seats and their anchorages of passenger vehicles |
全部代替：GB 13057-2003 |
2014-10-10 |
2015-7-1 |
| GB 12676-2014 |
商用车辆和挂车制动系统技术要求及试验方法 |
Technical requirements and testing methods for commercial vehicle and trailer braking systems |
全部代替：GB 12676-1999 |
2014-10-10 |
2015-7-1 |
| GB 11551-2014 |
汽车正面碰撞的乘员保护 |
The protection of the occupants in the event of a frontal collision for motor vehicle |
全部代替：GB 11551-2003 |
2014-9-3 |
2015-1-1 |
| QC/T 990-2014 |
电动汽车用锌空气电池 |
Zinc-air batteries for electric road vehicle |
|
2014-7-9 |
2014-11-1 |
| QC/T 231-2014 |
摩托车和轻便摩托车反冲起动器技术条件 |
Specification of kick-starter for motorcycles and mopeds |
全部代替：QC/T 231-1997 |
2014-5-6 |
2014-10-1 |
| QC/T 233-2014 |
摩托车和轻便摩托车制动踏板静强度性能要求及试验方法 |
Performance and measurement method for static intensity of motorcycles and mopeds |
全部代替：QC/T 233-1997 |
2014-5-6 |
2014-10-1 |
| QC/T 66-2014 |
摩托车和轻便摩托车湿式离合器 |
Wet clutch for moped and motorcycle |
全部代替：QC/T 66-1993 |
2014-5-6 |
2014-10-1 |
| QC/T 962-2014 |
摩托车和轻便摩托车漆层技术条件 |
Painting coat technical condition for motorcycle and moped |
|
2014-5-6 |
2014-10-1 |
| QC/T 680-2014 |
摩托车和轻便摩托车用电压调节器技术条件 |
General technical specifications for voltage regulators for motorcycles and mopeds |
全部代替：QC/T 680-2002 |
2014-5-6 |
2014-10-1 |
| QC/T 963-2014 |
摩托车和轻便摩托车车轮制动圈 |
Drum brake for motorcycles and mopeds wheels |
|
2014-5-6 |
2014-10-1 |
| QC/T 234-2014 |
摩托车和轻便摩托车转向轴承技术条件 |
Steering bearing of motorcycles and mopeds |
全部代替：QC/T 234-1997 |
2014-5-6 |
2014-10-1 |
| QC/T 964-2014 |
城市客车塑料座椅及其车辆固定件的强度 |
The strength of the plastic seats and their anchorages for city buses |
|
2014-5-6 |
2014-10-1 |
| QC/T 644-2014 |
汽车金属燃油箱技术条件 |
Specifications for automobile metal fuel tank |
全部代替：QC/T 644-2000,QC/T 488-2000 |
2014-5-6 |
2014-10-1 |
| QC/T 965-2014 |
汽车电动后视镜驱动器 |
Driver of Electric rear-view mirrors for Motor |
|
2014-5-6 |
2014-10-1 |
| QC/T 966-2014 |
汽车塑料件涂层技术条件 |
Coating technical conditions for automotive plastic parts |
|
2014-5-6 |
2014-10-1 |
| QC/T 459-2014 |
随车起重运输车 |
Truck with loading crane |
全部代替：QC/T 459-2004 |
2014-5-6 |
2014-10-1 |
| QC/T 29106-2014 |
汽车电线束技术条件 |
Technical Specification of Automobile Wire Harness |
全部代替：QC/T 29106-2004 |
2014-5-6 |
2014-10-1 |
| QC/T 198-2014 |
汽车用开关通用技术条件 |
General technical specification for automotive swith |
全部代替：QC/T 198-1995 |
2014-5-6 |
2014-10-1 |
| QC/T 220-2014 |
汽车用易熔线技术条件 |
Technical specifications for automotive fusible links |
全部代替：QC/T 220-1996 |
2014-5-6 |
2014-10-1 |
| QC/T 967-2014 |
汽油机进气道喷射式喷油器 |
Port fuel injector for gasoline engine |
|
2014-5-6 |
2014-10-1 |
| QC/T 968-2014 |
金属催化转化器中铂、钯、铑含量的测定方法 |
Determination methods of platinum, palladium and rhodium contents in metallic catalytic converters |
|
2014-5-6 |
2014-10-1 |
| QC/T 969-2014 |
乘用车行李厢内部开启机构 |
Interior trunk release for compartment of a passenger car |
|
2014-5-6 |
2014-10-1 |
| QC/T 636-2014 |
汽车电动玻璃升降器 |
Electric Window Regulator Specification For Vehicles |
全部代替：QC/T 636-2000 |
2014-5-6 |
2014-10-1 |
| QC/T 970-2014 |
乘用车空气滤清器技术条件 |
Passenger Car Air Filter Technical Specification |
|
2014-5-6 |
2014-10-1 |
| QC/T 971-2014 |
摩托车和轻便摩托车用空气滤清器滤芯技术条件 |
Specifications of Air filter Element for motorcycles and scooters |
|
2014-5-6 |
2014-10-1 |
| QC/T 972-2014 |
汽车电控液压助力转向器总成技术要求及试验方法 |
Technical requirements and test method for motor vehicle-electronically controlld ydraulic power steering gear |
|
2014-5-6 |
2014-10-1 |
| QC/T 299.1-2014 |
汽车液压转向助力泵 第1部分：技术要求 |
Automobile hydraulic steering power pump―Part 1：Technical requirements |
全部代替：QC/T 299-2000 |
2014-5-6 |
2014-10-1 |
| QC/T 299.2-2014 |
汽车液压转向助力泵 第2部分：试验方法 |
Automobile hydraulic steering power pump—Part 2：Test method |
全部代替：QC/T 299-2000 |
2014-5-6 |
2014-10-1 |
| QC/T 563-2014 |
汽车转向盘技术要求及试验方法 |
Performance and Test Methods for Automobile Steering wheel |
全部代替：QC/T 563-1999 |
2014-5-6 |
2014-10-1 |
| QC/T 29097-2014 |
汽车转向器总成技术要求 |
The technical specifications of automobile steering gear |
全部代替：QC/T 29097-1992 |
2014-5-6 |
2014-10-1 |
| QC/T 29096-2014 |
汽车转向器总成台架试验方法 |
The bench test methods of automobile steering gear |
全部代替：QC/T 29096-1992 |
2014-5-6 |
2014-10-1 |
| QC/T 303-2014 |
汽车转向油罐技术要求和试验方法 |
Technical requirements and test methods for motor vehicles oil reservoir |
全部代替：QC/T 303-1999 |
2014-5-6 |
2014-10-1 |
| QC/T 301-2014 |
汽车转向助力缸技术要求和试验方法 |
Technical requiremets and test methods for motor vehicles power cylinder |
全部代替：QC/T 301-1999,QC/T 302-1999 |
2014-5-6 |
2014-10-1 |
| QC/T 70-2014 |
摩托车和轻便摩托车发动机噪声测量方法 |
Measurement method of acoustic noise for engines of Motorcycles and Mopeds |
全部代替：QC/T 70-1993 |
2014-5-6 |
2014-10-1 |
| QC/T 226-2014 |
摩托车和轻便摩托车制动蹄组件和制动衬组件 |
Specification of brake shoes assembly and brake linling assembly for motorcycles and mopeds |
全部代替：QC/T 226-1997 |
2014-5-6 |
2014-10-1 |
| QC/T 593-2014 |
汽车液压比例阀性能要求及台架试验方法 |
Performance requirements and bench test methods of automobile hydraulic proportional valve |
全部代替：QC/T 593-1999 |
2014-5-6 |
2014-10-1 |
| GB 30509-2014 |
车辆及部件识别标记 |
Identification for passenger cars and their parts |
|
2013-12-13 |
2014-12-1 |
| GB/T 6323-2014 |
汽车操纵稳定性试验方法 |
Controllability and stability test procedure for automotive |
全部代替：GB/T 6323.5-1994,GB/T 6323.4-1994,GB/T 6323.3-1994,GB/T 6323.2-1994,GB/T 6323.1-1994,GB/T 6323.6-1994 |
2013-12-13 |
2014-6-1 |
| GB 17353-2014 |
摩托车和轻便摩托车防盗装置 |
Protective devices against unauthorized use for motorcycles and mopeds |
全部代替：GB 17353-1998 |
2013-12-13 |
2014-12-1 |
| GB 30510-2014 |
重型商用车辆燃料消耗量限值 |
Fuel consumption limits for heavy-duty commercial vehicles |
|
2013-12-13 |
2014-7-1 |
| GB/T 30511-2014 |
汽车用角灯配光性能 |
Photometric characteristics ofcornering lamps for motor vehicle |
|
2013-12-13 |
2014-6-1 |
| GB/T 30512-2014 |
汽车禁用物质要求 |
Requirements for prohibited substances on automobiles |
|
2013-12-13 |
2014-6-1 |
| GB/T 30513-2014 |
乘用车爆胎监测及控制系统技术要求和试验方法 |
Technical requirements and testing method of tire blow-out monitoring and controlling system for passenger car |
|
2013-12-13 |
2014-6-1 |
| GB/T 19753-2013 |
轻型混合动力电动汽车能量消耗量试验方法 |
Test methods for energy consumption of light-duty hybrid electric vehicles |
全部代替：GB/T 19753-2005 |
2013-11-25 |
2014-6-1 |
| GB/T 28046.5-2013 |
道路车辆 电气及电子设备的环境条件和试验 第5部分：化学负荷 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads |
|
2013-11-12 |
2014-4-15 |
| QC/T 253-2013 |
摩托车和轻便摩托车发动机型号编制方法 |
Codina Method for Engine Type of Motorcycle and Mopeg |
全部代替：QC/T 253-1998 |
2013-10-17 |
2014-3-1 |
| QC/T 682-2013 |
摩托车和轻便摩托车座垫 |
Seats used in motorcycles and mopeds |
全部代替：QC/T 682-2002 |
2013-10-17 |
2014-3-1 |
| QC/T 229-2013 |
摩托车和轻便摩托车转子机油泵技术条件 |
Technical Requirements for the Motorcycle and Moped Rotor Oil Pump |
全部代替：QC/T 229-1997 |
2013-10-17 |
2014-3-1 |
| QC/T 952-2013 |
乘用车辐板式车轮在轮毂上的安装尺寸 |
Disc wheels for passenger car — Dimensional of attachment on hub |
|
2013-10-17 |
2014-3-1 |
| QC/T 953-2013 |
商用车 平面安装车轮固定螺母 |
Commercial road vehicles-Flat attachment wheel fixing nuts |
|
2013-10-17 |
2014-3-1 |
| QC/T 954-2013 |
商用车 平面安装固定螺母 试验方法 |
Road vehicles—Flat attachment fixing nuts for commercial vehicles —Test methods |
|
2013-10-17 |
2014-3-1 |
| QC/T 258-2013 |
汽车车轮 螺母座强度试验 |
Vehicle wheels-Nut seat strength tests |
全部代替：QC/T 258-1998 |
2013-10-17 |
2014-3-1 |
| QC/T 199-2013 |
汽车车轮平衡块 |
Vehicle wheels – balance weight |
全部代替：QC/T 199-1995 |
2013-10-17 |
2014-3-1 |
| QC/T 326-2013 |
汽车标准件产品编号规则 |
Coding rules for automotive standardized parts |
全部代替：QC/T 326-1999 |
2013-10-17 |
2014-3-1 |
| QC/T 955-2013 |
专用汽车自动调平支承装置 |
Auto Leveling device of special purpose vehicle |
|
2013-10-17 |
2014-3-1 |
| QC/T 956-2013 |
干混砂浆运输车 |
Dry-mixed mortar vehicle |
|
2013-10-17 |
2014-3-1 |
| QC/T 957-2013 |
洗扫车 |
Cleaning sweeper truck |
|
2013-10-17 |
2014-3-1 |
| QC/T 29104-2013 |
专用汽车液压系统液压油固体颗粒污染度的限值 |
Limiting value of contamination level of solid particles of special purpose vehicle hydraulic system |
全部代替：QC/T 29104-1992 |
2013-10-17 |
2014-3-1 |
| QC/T 29105.3-2013 |
专用汽车液压系统液压油固体颗粒污染度测试方法 取样 |
Sampling methods of testing particulate contamination of hydraulic oil of special purpose vehicle hydraulic system |
全部代替：QC/T 29105.3-1992 |
2013-10-17 |
2014-3-1 |
| QC/T 718-2013 |
混凝土泵车 |
Truck mounted concrete pump |
全部代替：QC/T 718-2004 |
2013-10-17 |
2014-3-1 |
| QC/T 439-2013 |
摆臂式自装卸汽车 |
Swept-body dump truck |
全部代替：QC/T 439-1999,QC/T 440-1999 |
2013-10-17 |
2014-3-1 |
| QC/T 935-2013 |
餐厨垃圾车 |
Kitchen garbage vehicle |
|
2013-10-17 |
2014-3-1 |
| QC/T 939-2013 |
前卸料混凝土搅拌运输车技术条件 |
Technical Qualifications Of Front Discharge Truck |
|
2013-10-17 |
2014-3-1 |
| QC/T 457-2013 |
救护车 |
ambulance |
全部代替：QC/T 457-2002 |
2013-10-17 |
2014-3-1 |
| QC/T 936-2013 |
车厢可卸式垃圾车 |
detachable container garbage collector |
|
2013-10-17 |
2014-3-1 |
| QC/T 937-2013 |
护栏抢修车 |
Guardrail repair car |
|
2013-10-17 |
2014-3-1 |
| QC/T 940-2013 |
展示车 |
Exhibition vehicle |
|
2013-10-17 |
2014-3-1 |
| QC/T 958-2013 |
汽车真空泵性能要求及台架试验方法 |
Performance Requirements and Bench Test Methods of automobile vacuum pump |
|
2013-10-17 |
2014-3-1 |
| QC/T 592-2013 |
液压制动钳总成性能要求及台架试验方法 |
Performance requirements and Bench test methods for Hydraulic brake caliper assembly |
全部代替：QC/T 592-1999 |
2013-10-17 |
2014-3-1 |
| QC/T 959-2013 |
机械式驻车制动操纵杆总成性能要求及台架试验方法 |
Performance requirements and bench test methods of mechanical parking-brake joystick assembly |
|
2013-10-17 |
2014-3-1 |
| QC/T 960.1-2013 |
道路车辆 液压制动系统 第1部分：双喇叭金属管、螺纹孔、螺纹管接头和管座 |
Road vehicle–Hydraulic braking systems–Part 1：Double–flare pipes，tapped holes，male fittings and tube seats |
|
2013-10-17 |
2014-3-1 |
| QC/T 961-2013 |
液压制动系统塑料储液罐性能要求及台架试验方法 |
Performance requirements and bench test methods of hydraulic brake system plastic reservoir assembly |
|
2013-10-17 |
2014-3-1 |
| QC/T 949-2013 |
车载音频播放器技术条件 |
Specification for audio player on board |
|
2013-10-17 |
2014-3-1 |
| QC/T 951-2013 |
汽车用电路断电器 |
Circuit-breakers for automobile |
|
2013-10-17 |
2014-3-1 |
| QC/T 490-2013 |
汽车车身制图 |
Drawings for motor vehicle body |
全部代替：QC/T 490-2000 |
2013-10-17 |
2014-3-1 |
| QC/T 950-2013 |
汽车座椅加热垫技术要求和试验方法 |
Performance requirement and test of Heating car cushion |
|
2013-10-17 |
2014-3-1 |
| QC/T 948-2013 |
汽车顶部装载装置 |
Roof load carriers for road vehicles |
|
2013-10-17 |
2014-3-1 |
| QC/T 946-2013 |
汽车安全带织带性能要求和试验方法 |
Performance requirement and test of automobile safe belt strap |
|
2013-10-17 |
2014-3-1 |
| QC/T 945-2013 |
乘用车空调系统 |
Passenger Vehicle Air-Conditioning Unit |
|
2013-10-17 |
2014-3-1 |
| QC/T 627-2013 |
汽车电动门锁装置 |
Electronic Locks System for Motor Vehicles |
全部代替：QC/T 627-1999 |
2013-10-17 |
2014-3-1 |
| QC/T 662-2013 |
汽车空调(HFC-134a)用储液干燥器 |
Vehicle air conditioner (HFC-134a) receiver dryer |
全部代替：QC/T 662-2000 |
2013-10-17 |
2014-3-1 |
| QC/T 947-2013 |
汽车自动防眩目后视镜技术条件 |
Technology Standards of Auto-Dimming Rearview Mirror for Motor Vehicle |
|
2013-10-17 |
2014-3-1 |
| QC/T 941-2013 |
汽车材料中汞的检测方法 |
Test methods of mercury in automobiles materials |
|
2013-10-17 |
2014-3-1 |
| QC/T 943-2013 |
汽车材料中铅、镉的检测方法 |
Test methods of lead and cadmium in automotive materials |
|
2013-10-17 |
2014-3-1 |
| QC/T 942-2013 |
汽车材料中六价铬的检测方法 |
Test methods of hexavalent chromium in automotive materials |
|
2013-10-17 |
2014-3-1 |
| QC/T 944-2013 |
汽车材料中多溴联苯（PBBs）和多溴二苯醚（PBDEs）的检测方法 |
Test methods of polybrominated biphenyls and polybrominated diphenyl ethers in automotive materials |
|
2013-10-17 |
2014-3-1 |
| QC/T 938-2013 |
汽车对行人的碰撞保护试验规程 |
The Test Specification of Protection for Pedestrians in The Events of Collisions |
|
2013-10-17 |
2014-3-1 |
| GB/T 12549-2013 |
汽车操纵稳定性术语及其定义 |
Terms and definitions for vehicle controllability and stability |
全部代替：GB/T 12549-1990 |
2013-9-27 |
2014-7-1 |
| GB/T 30036-2013 |
汽车用自适应前照明系统 |
Adaptive front-lighting system for motor vehicles |
|
2013-9-27 |
2014-7-1 |
| GB/T 30038-2013 |
道路车辆 电气电子设备防护等级（IP代码） |
Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access |
|
2013-9-27 |
2014-7-1 |
| GB/T 30037-2013 |
汽车电动天窗总成 |
The assembly of electrical operation sunroof about motor vehicle |
|
2013-9-27 |
2014-7-1 |
| GB 15084-2013 |
机动车辆 间接视野装置 性能和安装要求 |
Motor vehicles - Devices for indirect vision - Requirements of performance and installation |
全部代替：GB 15084-2006 |
2013-9-18 |
2014-7-1 |
| GB 15085-2013 |
汽车风窗玻璃刮水器和洗涤器 性能要求和试验方法 |
Motor vehicles-windscreen wiper and washer systems - Performance requirements and test methods |
全部代替：GB 11565-1989,GB 15085-1994 |
2013-9-18 |
2015-1-1 |
| GB 15086-2013 |
汽车门锁及车门保持件的性能要求和试验方法 |
Motor vehicles' door locks and retention components performance requirements and test methods |
全部代替：GB 15086-2006 |
2013-9-18 |
2015-1-1 |
| GB 17578-2013 |
客车上部结构强度要求及试验方法 |
Requirements and test methods of strength for the superstructure of bus |
全部代替：GB/T 17578-1998 |
2013-9-18 |
2014-7-1 |
| GB 18099-2013 |
机动车及挂车侧标志灯配光性能 |
Photometric characteristics of side-marker lamps for motor vehicles and their trailers |
全部代替：GB 18099-2000 |
2013-9-18 |
2014-7-1 |
| GB 18409-2013 |
汽车驻车灯配光性能 |
Photometric characteristics of parking lamps for power-driven vehicles |
全部代替：GB 18409-2001 |
2013-9-18 |
2014-7-1 |
| GB 19239-2013 |
燃气汽车专用装置的安装要求 |
Mounting requirements of special equipment for gas vehicle |
全部代替：GB/T 19240-2003,GB/T 19239-2003 |
2013-9-18 |
2014-7-1 |
| GB 29753-2013 |
道路运输 食品与生物制品冷藏车 安全要求及试验方法 |
Road transportation - Perishable food and biological product of refrigerated van - Security requirement and test methods |
|
2013-9-18 |
2014-7-1 |
| GB 14166-2013 |
机动车乘员用安全带、约束系统、儿童约束系统和 ISOFIX 儿童约束系统 |
Safety-belts, restraint systems, child restraint systems and ISOFIX child restraint systems for occupants of power-driven vehicles |
全部代替：GB 14166-2003 |
2013-5-7 |
2014-1-1 |
| GB 14167-2013 |
汽车安全带安装固定点、ISOFIX固定点系统及上拉带固定点 |
Safety-belt anchorages, ISOFIX anchorages systems and ISOFIX top tether anchorages for vehicles |
全部代替：GB 14167-2006 |
2013-5-7 |
2014-1-1 |
| QC/T 721-2013 |
汽车用非电解锌片涂层 |
Non-electrolytically applied zinc flake coatings for automobile |
全部代替：QC/T 721-2004 |
2013-4-25 |
2013-9-1 |
| QC/T 927-2013 |
法兰连接器 |
Flange coupling connectors |
|
2013-4-25 |
2013-9-1 |
| QC/T 518-2013 |
汽车用螺纹紧固件紧固扭矩 |
Tightening torque for automotive threaded fasteners |
全部代替：QC/T 518-2007 |
2013-4-25 |
2013-9-1 |
| QC/T 401-2013 |
卡套式锥螺纹直角接头体 |
24°cone connectors—Male elbow—Body |
全部代替：QC/T 401-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 369-2013 |
多管夹片 |
Pipe clips—Fasten multipipe |
全部代替：QC/T 369-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 370-2013 |
单管夹片 |
Pipe clips—Fasten one pipe |
全部代替：QC/T 370-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 621.1-2013 |
钢带式弹性软管夹箍 第1部分：型式、尺寸和材料 |
Spring band hose clamps—Part1: Types, dimensions, materials |
全部代替：QC/T 621-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 621.2-2013 |
钢带式弹性软管夹箍 第2部分：技术条件 |
Spring band hose clamps—Part2: Technical conditions |
|
2013-4-25 |
2013-9-1 |
| QC/T 621.3-2013 |
钢带式弹性软管夹箍 第3部分：夹箍用软管和接管 |
Spring band hose clamps—Part3: Hose and spigot for clamps |
|
2013-4-25 |
2013-9-1 |
| QC/T 624-2013 |
橡胶堵塞 |
Rubber plugs |
全部代替：QC/T 624-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 378-2013 |
内六角锥形螺塞 |
Hexagon countersunk headless cone plugs |
全部代替：QC/T 378-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 400-2013 |
卡套式锥螺纹直角三通接头体 |
24° cone connectors—Male run tee—Body |
全部代替：QC/T 400-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 405-2013 |
扩口式锥螺纹三通管接头体 |
Flared couplings—Male branch tee—Body |
全部代替：QC/T 405-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 928-2013 |
中间固定式塑料管线夹 |
Plastic cable and tubing clips with interfix hole |
|
2013-4-25 |
2013-9-1 |
| QC/T 929-2013 |
一端固定式塑料管线夹 |
Plastic cable and tubing clips with side-fix hole |
|
2013-4-25 |
2013-9-1 |
| QC/T 930-2013 |
波纹管用夹箍 |
Corrugated pipe protectors |
|
2013-4-25 |
2013-9-1 |
| QC/T 931-2013 |
强力软管夹箍 |
Heavy duty hose clamps |
|
2013-4-25 |
2013-9-1 |
| QC/T 599-2013 |
端面凸焊螺栓 |
Overhead projection weld bolts |
全部代替：QC/T 599-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 403-2013 |
扩口式锥螺纹直通管接头体 |
Flared couplings—Male—Body |
全部代替：QC/T 403-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 379-2013 |
方头锥形螺塞 |
Square head cone plugs |
全部代替：QC/T 379-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 404-2013 |
扩口式锥螺纹直角管接头体 |
Flared couplings—Male elbow—Body |
全部代替：QC/T 404-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 381-2013 |
六角头锥形螺塞 |
Hexagon outside head cone plugs |
全部代替：QC/T 381-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 618-2013 |
嵌装塑料螺母技术条件 |
Specification for plastic expansion nut |
全部代替：QC/T 618-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 383-2013 |
六角头锥形磁性螺塞 |
Hexagon outside head cone plugs with magnetic core |
全部代替：QC/T 383-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 399-2013 |
卡套式锥螺纹直通接头体 |
24°cone connectors—Male—Body |
全部代替：QC/T 399-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 402-2013 |
卡套式锥螺纹三通接头体 |
24° cone connectors—Male branch tee—Body |
全部代替：QC/T 402-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 925-2013 |
超级电容电动城市客车 定型试验规程 |
Ultracapacitor Electric City Bus-Engineering Approval Evaluation Program |
|
2013-4-25 |
2013-9-1 |
| QC/T 926-2013 |
轻型混合动力电动汽车（ISG型）用动力单元可靠性试验方法 |
The reliability test methods for powertrain unit of light-duty hybrid electric vehicles(ISG type) |
|
2013-4-25 |
2013-9-1 |
| QC/T 917-2013 |
燃气汽车专用手动截止阀 |
Manual valve for gas vehicle |
|
2013-4-25 |
2013-9-1 |
| QC/T 625-2013 |
汽车用涂镀层和化学处理层 |
Metallic coatings and conversion coatings for automobile |
全部代替：QC/T 625-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 225-2013 |
摩托车和轻便摩托车用起动电机技术条件 |
Technical Specification of Starting Motor for Motorcycles and Mopeds |
全部代替：QC/T 225-1997 |
2013-4-25 |
2013-9-1 |
| QC/T 287-2013 |
汽车燃油滤清器纸质滤芯尺寸 |
Dimensions of fuel filter paper element for vehicles |
全部代替：QC/T 287-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 29032-2013 |
汽车用空气滤清器堵塞报警传感器 |
Alarms sensor for automobile air filters |
全部代替：QC/T 29032-1991 |
2013-4-25 |
2013-9-1 |
| QC/T 29061-2013 |
汽车发动机用蜡式调温器技术条件 |
Engineering specification for auto engine wax thermostat |
全部代替：QC/T 29061-1992 |
2013-4-25 |
2013-9-1 |
| QC/T 29115-2013 |
摩托车和轻便摩托车产品质量检验规程 |
Test Regulations for Motorcycle and Moped Productions Quality |
全部代替：QC/T 29115-1993,QC/T 29117.2-1993,QC/T 29117.3-1993 |
2013-4-25 |
2013-9-1 |
| QC/T 29117-2013 |
摩托车和轻便摩托车发动机产品质量检验规程 |
Test Regulations for the Engine of Motorcycle and Moped Production Quality |
全部代替：QC/T 29117.10-1993 |
2013-4-25 |
2013-9-1 |
| QC/T 305-2013 |
汽车液压动力转向控制阀总成性能要求与试验方法 |
Motor vehicles - Hydraulic power steering control valve performance requirements and test methods |
全部代替：QC/T 305-1999,QC/T 306-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 427-2013 |
汽车用电源总开关技术条件 |
Automobile use battery main switch technical requirement |
全部代替：QC/T 427-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 431-2013 |
火花塞瓷绝缘体技术条件 |
Spark plug ceramic insulator specifications |
全部代替：QC/T 431-1999,QC/T 432-1999,QC/T 433-1999,QC/T 434-1999,QC/T 435-1999,QC/T 436-1999,QC/T 437-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 47-2013 |
汽车座椅术语 |
Automobile seat terminology |
全部代替：QC/T 47-1992 |
2013-4-25 |
2013-9-1 |
| QC/T 48-2013 |
汽车电喷汽油机汽油滤清器总成技术条件 |
Specifications of petrol filter assembly for automotive engines with electronically controlled petrol injection system |
全部代替：QC/T 48-1992 |
2013-4-25 |
2013-9-1 |
| QC/T 526-2013 |
汽车发动机定型 试验规程 |
Automobile engine-engineering approval evaluation program |
全部代替：QC/T 526-1999 |
2013-4-25 |
2013-9-1 |
| QC/T 529-2013 |
汽车液压动力转向器技术条件与试验方法 |
Motor vehicles - Hydraulic power steering gear - Technique requirements and test methods |
全部代替：QC/T 529-2000,QC/T 530-2000 |
2013-4-25 |
2013-9-1 |
| QC/T 64-2013 |
摩托车和轻便摩托车化油器 |
Carburetor of Motorcycle and Moped |
全部代替：QC/T 64-1993,QC/T 65-1993 |
2013-4-25 |
2013-9-1 |
| QC/T 647-2013 |
汽车转向万向节总成性能要求及试验方法 |
Motor vehicles - Steering universal joint - Performance requirements and test methods |
全部代替：QC/T 647-2000 |
2013-4-25 |
2013-9-1 |
| QC/T 649-2013 |
汽车转向操纵机构性能要求及试验方法 |
Motor vehicles - Steering control mechanism - performance requirements and test methods |
全部代替：QC/T 649-2000 |
2013-4-25 |
2013-9-1 |
| QC/T 68-2013 |
摩托车和轻便摩托车用磁电机 技术条件 |
Technical Specification of Magneto for Motorcycles and Mopeds |
全部代替：QC/T 68-1993,QC/T 69-1993 |
2013-4-25 |
2013-9-1 |
| QC/T 684-2013 |
摩托车和轻便摩托车发动机用密封垫片技术条件 |
Specifications of sealing gaskets for engines of motorcycles and mopeds |
全部代替：QC/T 684-2002 |
2013-4-25 |
2013-9-1 |
| QC/T 898-2013 |
摩托车和轻便摩托车辐条 |
Wire spoke of motorcycles and mopeds |
|
2013-4-25 |
2013-9-1 |
| QC/T 899-2013 |
摩托车和轻便摩托车条母 |
Spoke nipple of motorcycles and mopeds |
|
2013-4-25 |
2013-9-1 |
| QC/T 902-2013 |
摩托车电子控制燃油喷射系统技术条件 |
Specifications of Electronic Control Fuel-injection System for Motorcycles and Mopeds |
|
2013-4-25 |
2013-9-1 |
| QC/T 903-2013 |
摩托车和轻便摩托车故障模式 |
Fault-types for motorcycles and mopeds |
|
2013-4-25 |
2013-9-1 |
| QC/T 904-2013 |
摩托车和轻便摩托车轮毂 |
Wheels hub of motorcycles and mopeds |
|
2013-4-25 |
2013-9-1 |
| QC/T 905-2013 |
汽车防护杠 |
Protecting Facility for Automotive |
|
2013-4-25 |
2013-9-1 |
| QC/T 906-2013 |
汽车内饰件用麻纤维复合板的技术要求和试验方法 |
Technical requirements and test methods of hemp fiber board for automobile interior trim |
|
2013-4-25 |
2013-9-1 |
| QC/T 907-2013 |
汽车散热器散热性能试验方法 |
Methods of Testing Performance of Radiators for Automobile |
|
2013-4-25 |
2013-9-1 |
| QC/T 908-2013 |
运马车 |
Horse Vehicle |
|
2013-4-25 |
2013-9-1 |
| QC/T 909-2013 |
沥青水泥砂浆搅拌半挂车 |
Mobile Mixing Semi-trailer for Bitumen-Cement-Mortar |
|
2013-4-25 |
2013-9-1 |
| QC/T 910-2013 |
玻璃运输半挂车 |
Glass transport semi-trailer |
|
2013-4-25 |
2013-9-1 |
| QC/T 911-2013 |
电源车 |
Power Supply Vehicle |
|
2013-4-25 |
2013-9-1 |
| QC/T 912-2013 |
半挂牵引车与半挂车匹配技术要求 |
Technical requirements for matching of towing vehicle and semi-trailer |
|
2013-4-25 |
2013-9-1 |
| QC/T 913-2013 |
液压悬挂挂车通用技术条件 |
General Technical Specifications for Platform Trailer with Hydraulic Suspension |
|
2013-4-25 |
2013-9-1 |
| QC/T 914-2013 |
二甲醚汽车定型试验规程 |
Dimethyl ether vehicle--Engineering approval evaluation program |
|
2013-4-25 |
2013-9-1 |
| QC/T 915-2013 |
车用二甲醚钢瓶集成阀 |
DME steel cylinder multivalve for vehicle |
|
2013-4-25 |
2013-9-1 |
| QC/T 916-2013 |
重型车用二甲醚单燃料发动机 技术条件 |
Specifications for mono-fuel DME engines of heavy-duty vehicles |
|
2013-4-25 |
2013-9-1 |
| QC/T 918-2013 |
汽车用汽油滤清器试验方法 |
Test methods of petrol filter for automobiles |
|
2013-4-25 |
2013-9-1 |
| QC/T 919-2013 |
汽车用机油滤清器试验方法 |
Test methods of luboil filter for automobiles |
|
2013-4-25 |
2013-9-1 |
| QC/T 920-2013 |
汽车用全流式机油滤清器总成技术条件 |
Specifications of full-flow luboil filter assembly for automobiles |
|
2013-4-25 |
2013-9-1 |
| QC/T 921-2013 |
汽车用分流离心式机油滤清器技术条件和试验方法 |
Specification and test methods of by-pass centrifugal luboil filters for automobiles |
|
2013-4-25 |
2013-9-1 |
| QC/T 922-2013 |
汽车用空气滤清器纸质滤芯技术条件 |
Specifications of paper element for automobile air filters |
|
2013-4-25 |
2013-9-1 |
| QC/T 923-2013 |
汽车柴油机燃油预滤器总成技术条件 |
Specifications of fuel prefilter assembly for automotive diesels |
|
2013-4-25 |
2013-9-1 |
| GB/T 21437.3-2012 |
道路车辆 由传导和耦合引起的电骚扰 第3部分：除电源线外的导线通过容性和感性耦合的电瞬态发射 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
|
2012-12-31 |
2013-6-1 |
| QC/T 924-2011 |
重型商用车辆燃料消耗量限值(第一阶段) |
Fuel consumption limits for heavy-duty commercial vehicles (The first stage) |
|
2012-12-31 |
2012-7-1 |
| GB/T 12544-2012 |
汽车最高车速试验方法 |
Measurement of maximum speed of motor vehicles |
全部代替：GB/T 12544-1990 |
2012-12-31 |
2013-7-1 |
| GB/T 15704-2012 |
道路车辆 轻合金车轮 冲击试验方法 |
Road vehicles - Light alloy wheels - Impact test procedure |
全部代替：GB/T 15704-1995 |
2012-12-31 |
2013-7-1 |
| GB/T 28948-2012 |
商用车辆 前端牵引装置 |
Commercial vehicle - Front towing attachments |
|
2012-12-31 |
2013-7-1 |
| GB/T 28958-2012 |
乘用车低温性能试验方法 |
Test methods of low temperature performance for passenger car |
|
2012-12-31 |
2013-7-1 |
| GB/T 28962-2012 |
液化石油气汽车定型试验规程 |
Approval evaluation test program for liquefied petroleum gas vehicles |
|
2012-12-31 |
2013-7-1 |
| GB/T 29121-2012 |
道路车辆 乘用车列车 横向稳定性试验 |
Road vehicles - Passenger car-trailer combinations - Lateral stability test |
|
2012-12-31 |
2013-7-1 |
| GB/T 29122-2012 |
摩托车和轻便摩托车防篡改 |
Anti-tampering measures for motorcycles and mopeds |
|
2012-12-31 |
2013-7-1 |
| GB/T 29123-2012 |
示范运行氢燃料电池电动汽车技术规范 |
Specifications for hydrogen fuel cell vehicles in demonstration |
|
2012-12-31 |
2013-7-1 |
| GB/T 29124-2012 |
氢燃料电池电动汽车示范运行配套设施规范 |
Hydrogen fuel cell vehicles facilities for demonstration specifications |
|
2012-12-31 |
2013-7-1 |
| GB/T 29125-2012 |
压缩天然气汽车燃料消耗量试验方法 |
Test methods for fuel consumption of CNG vehicles |
|
2012-12-31 |
2013-7-1 |
| GB/T 29126-2012 |
燃料电池电动汽车 车载氢系统 试验方法 |
Fuel cell electric vehicles - Onboard hydrogen system - Test methods |
|
2012-12-31 |
2013-7-1 |
| GB/T 29259-2012 |
道路车辆 电磁兼容术语 |
Road vehicle - Electromagnetic compatibility terminology |
|
2012-12-31 |
2013-6-1 |
| GB/T 29307-2012 |
电动汽车用驱动电机系统可靠性试验方法 |
The reliability test methods of drive motor system for electric vehicles |
|
2012-12-31 |
2013-6-1 |
| GB/T 28949-2012 |
内燃机和空气压缩机用进气空气滤清器 性能试验 |
Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing |
|
2012-12-31 |
2013-7-1 |
| GB/T 28950.1-2012 |
道路车辆和内燃机 滤清器名词术语 第1部分：滤清器和滤清器部件定义 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components |
|
2012-12-31 |
2013-7-1 |
| GB/T 28950.2-2012 |
道路车辆和内燃机 滤清器名词术语 第2部分：滤清器及其部件性能指标定义 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components |
|
2012-12-31 |
2013-7-1 |
| GB/T 28953-2012 |
汽车柴油机 旋装式燃油滤清器 安装和连接尺寸 |
Automotive diesel - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
|
2012-12-31 |
2013-7-1 |
| GB/T 28954-2012 |
汽车发动机 旋装式机油滤清器 连接尺寸 |
Automotive engines - Spin-on filters for lubricating oil - Connect dimensions |
|
2012-12-31 |
2013-7-1 |
| GB/T 28955-2012 |
道路车辆 全流式机油滤清器滤芯 尺寸 |
Road vehicles - Filter elements for full flow oil filters - Dimensions |
|
2012-12-31 |
2013-7-1 |
| GB/T 28956.1-2012 |
道路车辆 商用车用空气滤清器滤芯尺寸 第1部分：A型和B型 |
Commercial vehicles - Dimenions of air filter elements - Part 1: Types A and B |
|
2012-12-31 |
2013-7-1 |
| GB/T 28956.2-2012 |
道路车辆 商用车用空气滤清器滤芯尺寸 第2部分：C型和D型 |
Commercial vehicles - Dimenions of air filter elements - Part 2: Types C and D |
|
2012-12-31 |
2013-7-1 |
| GB/T 28957.1-2012 |
道路车辆 用于滤清器评定的试验粉尘 第1部分：氧化硅试验粉尘 |
Road vehicles - Test dust for filter evaluation - Part 1: Silicon dioxide test dust |
|
2012-12-31 |
2013-7-1 |
| GB/T 28957.2-2012 |
道路车辆 用于滤清器评定的试验粉尘 第2部分：氧化铝试验粉尘 |
Road vehicles - Test dust for filter evaluation - Part 2 : Aluminium oxide test dust |
|
2012-12-31 |
2013-7-1 |
| GB/T 28959-2012 |
汽车柴油机 具有垂直安装面的燃油滤清器滤座 安装和连接尺寸 |
Automotive diesel - Heads for fuel filters with vertical flange- Mounting and connecting dimensions |
|
2012-12-31 |
2013-7-1 |
| GB/T 28960-2012 |
汽车柴油机 具有水平安装面的旋装式燃油滤清器滤座 安装和连接尺寸 |
Automotive diesel - Heads for fuel filters with horizontal flange - Mounting and connecting dimensions |
|
2012-12-31 |
2013-7-1 |
| GB/T 28961-2012 |
汽车柴油机 双级燃油滤清器 安装和连接尺寸 |
Automotive diesel - Two-stage fuel filters for Compression-ignition engines - Mounting and connecting dimensions |
|
2012-12-31 |
2013-7-1 |
| GB/T 29120-2012 |
H点和R点确定程序 |
Procedure for H-point and R-point Determination |
|
2012-12-31 |
2013-7-1 |
| GB/T 6791-2012 |
道路车辆 火花塞及其气缸盖安装孔 基本特征及尺寸 |
Road vehicles - Spark-plugs and their cylinder head housing - Basic characteristics and dimensions |
全部代替：GB/T 6789-1999,GB/T 6784-1999,GB/T 6787-1986,GB/T 6786-1986,GB/T 6788-1986,GB/T 6791-1986,GB/T 6785-1999 |
2012-12-31 |
2013-7-1 |
| QC/T 932-2012 |
道路运输液体危险货物罐式车辆紧急切断阀 |
Emergency shutoff valve of road tanker for dangerous liquid goods transportation |
|
2012-12-28 |
2013-6-1 |
| QC/T 933-2012 |
无线电管制车技术条件 |
The technical standard of radio controlling vehicle |
|
2012-12-28 |
2013-6-1 |
| QC/T 934-2012 |
无线电监测车技术条件 |
The technical standard of radio monitoring vehicle |
|
2012-12-28 |
2013-6-1 |
| GB/T 28672-2012 |
汽车零部件再制造产品技术规范 交流发电机 |
The technical specifications for remanufacture of automotive components - Alternator |
|
2012-9-3 |
2013-1-1 |
| GB/T 28673-2012 |
汽车零部件再制造产品技术规范 起动机 |
The technical specifications for remanufacturing of automotive components - Starter |
|
2012-9-3 |
2013-1-1 |
| GB/T 28674-2012 |
汽车零部件再制造产品技术规范 转向器 |
The technical specifications for remanufacturing of automotive components - Steering gear |
|
2012-9-3 |
2013-1-1 |
| GB/T 28675-2012 |
汽车零部件再制造 拆解 |
Remanufacturing of automotive components - Disassembly |
|
2012-9-3 |
2013-1-1 |
| GB/T 28676-2012 |
汽车零部件再制造 分类 |
Remanufacturing of automotive components - Classification |
|
2012-9-3 |
2013-1-1 |
| GB/T 28677-2012 |
汽车零部件再制造 清洗 |
Remanufacturing of automotive components - Cleaning |
|
2012-9-3 |
2013-1-1 |
| GB/T 28678-2012 |
汽车零部件再制造 出厂验收 |
Remanufacturing of automotive components - Pre-delivery inspection |
|
2012-9-3 |
2013-1-1 |
| GB/T 28679-2012 |
汽车零部件再制造 装配 |
Remanufacturing of automotive components - Assembly |
|
2012-9-3 |
2013-1-1 |
| GB/T 28382-2012 |
纯电动乘用车 技术条件 |
Battery electric passenger cars - Specifications |
|
2012-5-11 |
2012-7-1 |
| GB 28373-2012 |
N类和O类罐式车辆侧倾稳定性 |
Tank vehicles of categories N and O with regard to rollover stability |
|
2012-5-11 |
2014-1-1 |
| GB 24406-2012 |
专用校车学生座椅系统及其车辆固定件的强度 |
The strength of student seat systems and their anchorages of special school bus |
全部代替：GB 24406-2009 |
2012-4-10 |
2012-5-1 |
| GB 24407-2012 |
专用校车安全技术条件 |
The safety technique specifications of special school |
全部代替：GB 24407-2009 |
2012-4-10 |
2012-5-1 |
| GB/T 28542-2012 |
道路车辆应急起动电缆 |
Road vehicles jump-start cables |
|
2012-3-13 |
2012-11-1 |
| GB 27999-2011 |
乘用车燃料消耗量评价方法及指标 |
Fuel consumption evaluation methods and targets for passenger cars |
|
2011-12-30 |
2012-1-1 |
| GB/T 27840-2011 |
重型商用车辆燃料消耗量测量方法 |
Fuel consumption test methods for heavy-duty commercial vehicles |
|
2011-12-30 |
2012-1-1 |
| GB 27887-2011 |
机动车儿童乘员用约束系统 |
Restraining devices for child occupants of power-driven vehicles |
|
2011-12-30 |
2012-7-1 |
| GB/T 20234.1-2011 |
电动汽车传导充电用连接装置 第1部分：通用要求 |
Connection set of conductive charging for electric vehicles - Part 1: General requirements |
全部代替：GB/T 20234-2006 |
2011-12-22 |
2012-3-1 |
| GB/T 20234.2-2011 |
电动汽车传导充电用连接装置 第2部分：交流充电接口 |
Connection set for conductive charging of electric vehicles - Part 2: AC charging coupler |
|
2011-12-22 |
2012-3-1 |
| GB/T 20234.3-2011 |
电动汽车传导充电用连接装置 第3部分：直流充电接口 |
Connection set for conductive charging of electric vehicles - Part 3: DC charging coupler |
|
2011-12-22 |
2012-3-1 |
| QC/T 853-2011 |
六角法兰面自排屑螺栓 |
Hexagon flange removing scraps bolts |
|
2011-12-20 |
2012-7-1 |
| QC/T 854-2011 |
轴肩式双头螺柱 |
Bolt with double end |
|
2011-12-20 |
2012-7-1 |
| QC/T 855-2011 |
内六角花形盘头螺钉 |
Hexalobular socket pan head screws |
|
2011-12-20 |
2012-7-1 |
| QC/T 856-2011 |
内六角花形沉头螺钉 |
Hexagon lobular socket countersunk head screws |
|
2011-12-20 |
2012-7-1 |
| QC/T 857-2011 |
焊接螺柱 |
Weld studs |
|
2011-12-20 |
2012-7-1 |
| QC/T 858-2011 |
六角厚螺母 细牙 |
Hexagon thick nuts-fine thread |
|
2011-12-20 |
2012-7-1 |
| QC/T 859-2011 |
A型方螺母座 |
A type square nuts box |
|
2011-12-20 |
2012-7-1 |
| QC/T 608-2011 |
B型板簧螺母 |
B type spring nuts |
全部代替：QC/T 608-1999 |
2011-12-20 |
2012-7-1 |
| QC/T 860-2011 |
焊接六角螺母 |
Hexagon weld nuts |
|
2011-12-20 |
2012-7-1 |
| QC/T 861-2011 |
盲孔平头六角铆螺母 |
Flat head threaded tubular hexagon blind rivets |
|
2011-12-20 |
2012-7-1 |
| QC/T 862-2011 |
B型方螺母座 |
B type square nuts box |
|
2011-12-20 |
2012-7-1 |
| QC/T 863-2011 |
焊接方螺母 |
Square weld nuts |
|
2011-12-20 |
2012-7-1 |
| QC/T 864-2011 |
六角法兰面承面带齿螺母 |
Hexagonal nuts with serrated flange |
|
2011-12-20 |
2012-7-1 |
| QC/T 865-2011 |
螺旋铆钉 |
Tapping rivets |
|
2011-12-20 |
2012-7-1 |
| QC/T 866-2011 |
内六角花形半沉头螺钉 |
Hexalobular socket raised countersunk head screws |
|
2011-12-20 |
2012-7-1 |
| QC/T 867-2011 |
焊接圆螺母 |
Round weld nut |
|
2011-12-20 |
2012-7-1 |
| QC/T 868-2011 |
塑料六角螺母 |
Plastic hexagon nuts |
|
2011-12-20 |
2012-7-1 |
| QC/T 712-2011 |
汽车安全带用焊接螺母 |
Weld nuts for fixing the safety belt devices of vehicle |
全部代替：QC/T 712-2004 |
2011-12-20 |
2012-7-1 |
| QC/T 869-2011 |
短周期弧焊焊接螺柱 |
Short-cycle drawn arc welding stud |
|
2011-12-20 |
2012-7-1 |
| QC/T 870-2011 |
双头螺柱 bm=1.25d |
Double end studs bm=1.25d |
|
2011-12-20 |
2012-7-1 |
| QC/T 871-2011 |
双头螺柱 bm=2d |
Double end studs bm=2d |
|
2011-12-20 |
2012-7-1 |
| QC/T 872-2011 |
焊接六角凸缘螺母 |
Hexagon weld nuts with flange |
|
2011-12-20 |
2012-7-1 |
| QC/T 873-2011 |
内六角花形半沉头自钻自攻螺钉 |
Hexalobular socket raised countersunk (oval) head self drilling screws with tapping screw thread |
|
2011-12-20 |
2012-7-1 |
| QC/T 874-2011 |
内六角花形沉头自钻自攻螺钉 |
Hexalobular socket countersunk head self drilling screws with tapping screw thread |
|
2011-12-20 |
2012-7-1 |
| QC/T 875-2011 |
内六角花形盘头自钻自攻螺钉 |
Hexalobular socket pan head self drilling screws with tapping screw thread |
|
2011-12-20 |
2012-7-1 |
| QC/T 876-2011 |
塑料用六角凸缘自攻螺钉 |
Hexagon collar head tapping screws for plastic |
|
2011-12-20 |
2012-7-1 |
| QC/T 877-2011 |
塑料用六角法兰面自攻螺钉 |
Hexagon flange head tapping screws for plastic |
|
2011-12-20 |
2012-7-1 |
| QC/T 878-2011 |
塑料用内六角花形盘头自攻螺钉 |
Hexalobular socket pan head tapping screws for plastic |
|
2011-12-20 |
2012-7-1 |
| QC/T 879-2011 |
E型通孔式嵌装塑料螺母 |
Plastic expansion nut with open end - type E |
|
2011-12-20 |
2012-7-1 |
| QC/T 880-2011 |
防拆卸螺栓 |
No unscrew bolt |
|
2011-12-20 |
2012-7-1 |
| QC/T 881-2011 |
塑料用焊接螺柱 |
Welding studs for plastic |
|
2011-12-20 |
2012-7-1 |
| QC/T 882-2011 |
开口夹 |
Split clamps |
|
2011-12-20 |
2012-7-1 |
| QC/T 883-2011 |
密封塞 |
Sealing plug |
|
2011-12-20 |
2012-7-1 |
| QC/T 884-2011 |
内六角锥形磁性螺塞 |
Hexagon socket pipe magnetic plugs |
|
2011-12-20 |
2012-7-1 |
| QC/T 885-2011 |
B型板簧锁紧螺母 |
B type spring nuts - prevailing torque type |
|
2011-12-20 |
2012-7-1 |
| QC/T 886-2011 |
电弧焊销 |
Weld studs for arc welding |
|
2011-12-20 |
2012-7-1 |
| QC/T 887-2011 |
通气管总成 |
Ventilating hose assembly |
|
2011-12-20 |
2012-7-1 |
| QC/T 888-2011 |
焊接六角凸缘锁紧螺母 |
All - metal hexagon collar weld nuts - prevailing torque type |
|
2011-12-20 |
2012-7-1 |
| QC/T 889-2011 |
A型轴用挡圈 |
Retainers for shafts - A type |
|
2011-12-20 |
2012-7-1 |
| QC/T 890-2011 |
D型通孔式嵌装塑料螺母 |
Plastic expansion nut with open end - type D |
|
2011-12-20 |
2012-7-1 |
| QC/T 616-2011 |
C型通孔式嵌装塑料螺母 |
Plastic expansion nut with open end - type C |
全部代替：QC/T 616-1999 |
2011-12-20 |
2012-7-1 |
| QC/T 891-2011 |
塑料用焊接螺钉 |
Welding screws for plastic |
|
2011-12-20 |
2012-7-1 |
| QC/T 892-2011 |
塑料件用开口型平圆头抽芯铆钉 |
Open end blind rivets with break pull mandrel and protruding head for plastic parts |
|
2011-12-20 |
2012-7-1 |
| QC/T 615-2011 |
B型通孔式嵌装塑料螺母 |
Plastic expansion nut with open end - type B |
全部代替：QC/T 615-1999 |
2011-12-20 |
2012-7-1 |
| QC/T 895-2011 |
电动汽车用传导式车载充电机 |
on-board charger for electric vehicles |
|
2011-12-20 |
2012-7-1 |
| QC/T 897-2011 |
电动汽车用电池管理系统技术条件 |
Technical specification of battery management system for electric vehicles |
|
2011-12-20 |
2012-7-1 |
| QC/T 893-2011 |
电动汽车用驱动电机系统故障分类及判断 |
Failure classification and assessment of electric motor system for electric vehicle |
|
2011-12-20 |
2012-7-1 |
| QC/T 896-2011 |
电动汽车用驱动电机系统接口 |
Interface of electrical motor system for electric vehicle |
|
2011-12-20 |
2012-7-1 |
| QC/T 894-2011 |
重型混合动力电动汽车污染物排放车载测量方法 |
On Board Measurement Methods for Emissions from Heavy-Duty Hybrid Electric Vehicles |
|
2011-12-20 |
2012-7-1 |
| GB/T 28045-2011 |
道路车辆 42V供电电压的电气和电子设备 电气负荷 |
Road vehicles - Electrical and electronic equipment for a supply voltage of 42V - Electrical loads |
|
2011-10-31 |
2012-2-1 |
| GB/T 28046.1-2011 |
道路车辆 电气及电子设备的环境条件和试验 第1部分：一般规定 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 1: General |
|
2011-10-31 |
2012-2-1 |
| GB/T 28046.2-2011 |
道路车辆 电气及电子设备的环境条件和试验 第2部分：电气负荷 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads |
|
2011-10-31 |
2012-2-1 |
| GB/T 28046.3-2011 |
道路车辆 电气及电子设备的环境条件和试验 第3部分：机械负荷 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads |
|
2011-10-31 |
2012-2-1 |
| GB/T 28046.4-2011 |
道路车辆 电气及电子设备的环境条件和试验 第4部分：气候负荷 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads |
|
2011-10-31 |
2012-2-1 |
| GB/T 26774-2011 |
车辆运输车通用技术条件 |
Technical specification for car transport vehicles |
|
2011-7-20 |
2012-1-1 |
| GB/T 26775-2011 |
车载音视频系统通用技术条件 |
General technical specification for audio video system on board |
|
2011-7-20 |
2012-1-1 |
| GB/T 26777-2011 |
挂车支撑装置 |
Semitrailer landing gears |
|
2011-7-20 |
2012-1-1 |
| GB/T 26778-2011 |
汽车列车性能要求及试验方法 |
Combination of vehicle performance requirements and test method |
|
2011-7-20 |
2012-1-1 |
| GB/T 26779-2011 |
燃料电池电动汽车 加氢口 |
Fuel cell electric vehicles - Refuelling receptacle |
|
2011-7-20 |
2012-1-1 |
| GB/T 26780-2011 |
压缩天然气汽车燃料系统碰撞安全要求 |
The safety requirement of fuel system for compressed natural gas vehicle in the collision |
|
2011-7-20 |
2012-1-1 |
| GB/T 26776-2011 |
道路车辆 3.5 t以上的商用车报警系统 |
Road vehicles - Alarm systems for commercial vehicles of maximum authorized total mass greater than 3.5t |
|
2011-7-20 |
2012-1-1 |
| GB/T 26988-2011 |
汽车部件可回收利用性标识 |
Marks for recoverability of automobile parts |
|
2011-7-19 |
2012-3-1 |
| GB/T 26989-2011 |
汽车回收利用 术语 |
Automobile recovery - Terminology |
|
2011-7-19 |
2012-3-1 |
| GB/T 26987-2011 |
道路车辆 路面摩擦特性测定 |
Road vehicles - Measurement of roadsurface friction |
|
2011-7-19 |
2012-3-1 |
| GB/T 26990-2011 |
燃料电池电动汽车 车载氢系统 技术条件 |
Fuel cell electric vehicles - Onboard hydrogen system - Specifications |
|
2011-7-19 |
2012-3-1 |
| GB/T 26991-2011 |
燃料电池电动汽车 最高车速试验方法 |
Fuel cell electric vehicles - Maximum speed test method |
|
2011-7-19 |
2012-3-1 |
| GB/T 26672-2011 |
道路车辆 带调节器的交流发电机试验方法 |
Road vehicle - Alternators with regulators - Test methods |
|
2011-6-16 |
2011-12-1 |
| GB/T 26673-2011 |
道路车辆 点火系统电气特性试验方法 |
Road vehicles - Ignition systems - Electrical performance and function test methods |
|
2011-6-16 |
2011-12-1 |
| GB/T 26674-2011 |
道路车辆 起动机电气特性试验方法 |
Road vehicle - Electrical performance of starter motors - Test methods |
|
2011-6-16 |
2011-12-1 |
| QC/T 241-2011 |
汽车无内胎车轮密封性试验方法 |
Air leakage test methods of automobile wheels for tubeless tires |
全部代替：QC/T 241-1997 |
2011-5-18 |
2011-8-1 |
| QC/T 259-2011 |
车轮轮辋与轮辐焊接强度要求及试验方法 |
Performance requirements and test methods of joint between rim and disc |
全部代替：QC/T 259-1998 |
2011-5-18 |
2011-8-1 |
| QC/T 29063.1-2011 |
汽车机械式变速器总成技术条件 第1部分：微型 |
Technical specification for auto manual transmission assembly - Part 1: mini-vehicle |
全部代替：QC/T 29063-1992 |
2011-5-18 |
2011-8-1 |
| QC/T 319-2011 |
专用汽车取力器 |
Power - Take-Off for Special Purpose Vehicles |
全部代替：QC/T 319-1999 |
2011-5-18 |
2011-8-1 |
| QC/T 474-2011 |
客车平顺性评价指标及限值 |
Buses-Ride comfort-Evaluation value and limits |
全部代替：QC/T 474-1999 |
2011-5-18 |
2011-8-1 |
| QC/T 568.1-2011 |
汽车机械式变速器总成台架试验方法 第1部分：微型 |
Rig testing method for auto manual transmission assembly - Part 1: mini-vehicle |
全部代替：QC/T 568-1999 |
2011-5-18 |
2011-8-1 |
| QC/T 585-2011 |
乘用车机械式千斤顶技术条件 |
Mechanical jacks of passenger cars |
全部代替：QC/T 585-1999 |
2011-5-18 |
2011-8-1 |
| QC/T 691-2011 |
车用天然气单燃料发动机技术条件 |
Technical specification of Single-fuel natural gas vehicle engine |
全部代替：QC/T 691-2002 |
2011-5-18 |
2011-8-1 |
| QC/T 692-2011 |
汽油/天然气两用燃料发动机技术条件 |
Technical specification of Gasoline/NG Bi-fuel Engine |
全部代替：QC/T 692-2002 |
2011-5-18 |
2011-8-1 |
| QC/T 693-2011 |
液化石油气发动机技术条件 |
Technical specification of Liquefied petroleum gas engine |
全部代替：QC/T 693-2002 |
2011-5-18 |
2011-8-1 |
| QC/T 696-2011 |
汽车底盘集中润滑供油系统 |
The Centralized Lubrication System of Automotive Chassis |
全部代替：QC/T 696-2002 |
2011-5-18 |
2011-8-1 |
| QC/T 80-2011 |
道路车辆 气制动系统用尼龙（聚酰胺）管 |
Road vehicles－Polyamide (PA) tubing for air braking systems |
全部代替：QC/T 80-1993 |
2011-5-18 |
2011-8-1 |
| QC/T 843-2011 |
加长型礼宾车通用技术条件 |
General specifications for limousine |
|
2011-5-18 |
2011-8-1 |
| QC/T 844-2011 |
乘用车座椅用调角器技术条件 |
Technical specification of recliner for passenger car seats |
|
2011-5-18 |
2011-8-1 |
| QC/T 845-2011 |
乘用车座椅用锁技术条件 |
Passenger car -- Technique specification of lock for seat |
|
2011-5-18 |
2011-8-1 |
| QC/T 846-2011 |
重型平板运输车通用技术条件 |
Generic specifications for heavy-duty flat transporter |
|
2011-5-18 |
2011-8-1 |
| QC/T 847-2011 |
下水道疏通车 |
Sewer Dredge Vehicle |
|
2011-5-18 |
2011-8-1 |
| QC/T 848-2011 |
拉臂式自装卸装置 |
Hook Loader Container Handling Device |
|
2011-5-18 |
2011-8-1 |
| QC/T 849-2011 |
舞台车 |
Mobile Stage Vehicle |
|
2011-5-18 |
2011-8-1 |
| QC/T 850-2011 |
乘用车座椅用聚氨酯泡沫 |
Polyurethane foam for seating of passenger car |
|
2011-5-18 |
2011-8-1 |
| QC/T 851-2011 |
汽车用补强胶片 |
Reinforcement Adhesive Sheet for Automobile |
|
2011-5-18 |
2011-8-1 |
| QC/T 852-2011 |
汽车用折边胶 |
Hemming Adhesive for Automobile |
|
2011-5-18 |
2011-8-1 |
| GB 11557-2011 |
防止汽车转向机构对驾驶员伤害的规定 |
The stipulation protecting drivers from being injured by motor vehicle steering mechanism |
全部代替：GB 11557-1998 |
2011-5-12 |
2012-1-1 |
| GB 11568-2011 |
汽车罩（盖）锁系统 |
Motor vehicles-Hood latch system |
全部代替：GB 11568-1999 |
2011-5-12 |
2012-1-1 |
| GB 7063-2011 |
汽车护轮板 |
The wheel guards of motor vehicles |
全部代替：GB 7063-1994 |
2011-5-12 |
2012-1-1 |
| GB 26512-2011 |
商用车驾驶室乘员保护 |
The protection of the occupants of the cab of a commercial vehicle |
|
2011-5-12 |
2012-1-1 |
| GB 26511-2011 |
商用车前下部防护要求 |
Front underrun protective requirements for commercial vehicle |
|
2011-5-12 |
2013-1-1 |
| GB 26134-2010 |
乘用车顶部抗压强度 |
Roof crush resistance of passenger cars |
|
2011-1-14 |
2012-1-1 |
| GB/T 26149-2010 |
基于胎压监测模块的汽车轮胎气压监测系统 |
TPM Sensor Module based tire pressure monitoring systems for motor vehicles |
|
2011-1-14 |
2011-7-1 |
| GB 16897-2010 |
制动软管的结构、性能要求及试验方法 |
Brake hose - Structure, performance and test methods |
全部代替：GB 16897-1997 |
2011-1-10 |
2011-7-1 |
| GB 17352-2010 |
摩托车和轻便摩托车后视镜的性能和安装要求 |
Performance and installation requirements of rear views mirrors for motorcycles and mopeds |
全部代替：GB 17352-1998 |
2011-1-10 |
2012-1-1 |
| GB 18100.1-2010 |
摩托车照明和光信号装置的安装规定 第1部分：两轮摩托车 |
Provisions for installation of lighting and light-signalling device for motorcycles - Part 1: Two-wheels motorcycle |
部分代替：GB 18100-2000 |
2011-1-10 |
2012-1-1 |
| GB 18100.2-2010 |
摩托车照明和光信号装置的安装规定 第2部分：两轮轻便摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 2: Two-wheels moped |
全部代替：GB 18100-2000 |
2011-1-10 |
2012-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB 18100.3-2010 |
摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
Provisions for installation of lighting and light-signalling devices for motorcycles - Part 3: Three-wheeled motorcycles |
|
2011-1-10 |
2013-1-1 |
| GB/T 5923-2010 |
汽车柴油机燃油滤清器试验方法 |
Test methods of fuel filter for automotive compression ignition engines |
全部代替：GB/T 5923-1986 |
2011-1-10 |
2011-5-1 |
| QC/T 837-2010 |
混合动力电动汽车类型 |
Types of hybrid electric vehicles |
|
2010-11-10 |
2011-3-1 |
| QC/T 838-2010 |
超级电容电动城市客车 |
Ultracapacitor electric city bus |
|
2010-11-10 |
2011-3-1 |
| QC/T 839-2010 |
超级电容电动城市客车供电系统 |
Power supply system for ultracapacitor electric city bus |
|
2010-11-10 |
2011-3-1 |
| QC/T 840-2010 |
电动汽车用动力蓄电池产品规格尺寸 |
Specification and dimension of traction battery for electric vehicles |
|
2010-11-10 |
2011-3-1 |
| QC/T 841-2010 |
电动汽车传导式充电接口 |
Electric vehicle conductive charge coupler |
|
2010-11-10 |
2011-3-1 |
| QC/T 842-2010 |
电动汽车电池管理系统与非车载充电机之间的通信协议 |
Communication Protocols between Battery Management System and Off-board Charger for Electric Vehicles |
|
2010-11-10 |
2011-3-1 |
| GB/T 25085-2010 |
道路车辆 60V和600V单芯电线 |
Road vehicles - 60 V and 600 V single-core cables |
|
2010-9-2 |
2011-2-1 |
| GB/T 25086-2010 |
道路车辆 牵引车和挂车之间的电连接器 12V7芯辅助型（12S） |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12S( supplementary) for vehicles with 12V nominal supply voltage |
|
2010-9-2 |
2011-2-1 |
| GB/T 25087-2010 |
道路车辆 圆形、屏蔽和非屏蔽的60V和600V多芯护套电缆 |
Road vehicles - Round, screened and unscreened 60V and 600V multi-core sheathed cables |
|
2010-9-2 |
2011-2-1 |
| GB/T 25088-2010 |
道路车辆 牵引车和挂车之间的电连接器 24V7芯辅助型（24S） |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24S (supplementary) for vehicles with 24V nominal supply voltage |
|
2010-9-2 |
2011-2-1 |
| GB/T 25089-2010 |
道路车辆 数据电缆 |
Road vehicles - Data cables |
|
2010-9-2 |
2011-2-1 |
| QC/T 222-2010 |
自卸汽车通用技术条件 |
General specifications for tipper |
全部代替：QC/T 222-1997 |
2010-8-16 |
2010-12-1 |
| QC/T 223-2010 |
自卸汽车试验方法 |
Performance test methods for tipper |
全部代替：QC/T 223-1997 |
2010-8-16 |
2010-12-1 |
| QC/T 449-2010 |
保温车、冷藏车技术条件及试验方法 |
Technical conditions and test methods of insulated and refrigerated vehicles |
全部代替：QC/T 449-2000,QC/T 450-2000 |
2010-8-16 |
2010-12-1 |
| QC/T 460-2010 |
自卸汽车液压缸技术条件 |
Technical Specification of Hydraulic Cylinder for Dump Truck |
全部代替：QC/T 460-1999 |
2010-8-16 |
2010-12-1 |
| QC/T 468-2010 |
汽车散热器 |
Automobile Radiator |
全部代替：QC/T 468-1999 |
2010-8-16 |
2010-12-1 |
| QC/T 666.1-2010 |
汽车空调(HFC-134a)用密封件 第1部分： O形橡胶密封圈 |
Auto air-condiction (HFC-134a) seal parts Part 1:rubber O-rings |
全部代替：QC/T 666-2000 |
2010-8-16 |
2010-12-1 |
| QC/T 667-2010 |
混凝土搅拌运输车技术条件和试验方法 |
Concrete truck mixer－Requirements and test methods |
全部代替：QC/T 667-2000,QC/T 668-2000 |
2010-8-16 |
2010-12-1 |
| QC/T 825-2010 |
自卸汽车液压系统技术条件 |
The Technical Specification Of Tipper Hydraulic System |
|
2010-8-16 |
2010-12-1 |
| QC/T 826-2010 |
桥梁检测车 |
Bridge inspection vehicle |
|
2010-8-16 |
2010-12-1 |
| QC/T 828-2010 |
汽车空-空中冷器技术条件 |
Automobile Air-to-Air Charge Air Cooler Technical Specification |
|
2010-8-16 |
2010-12-1 |
| QC/T 829-2010 |
柴油车排气后处理装置试验方法 |
Measurement methods for diesel vehicle aftertreatment devices |
|
2010-8-16 |
2010-12-1 |
| QC/T 830-2010 |
汽车高压气体放电灯用电子镇流器 |
Electronic ballast for high-intensity-discharge lamp of motor vehicle |
|
2010-8-16 |
2010-12-1 |
| QC/T 831-2010 |
乘用车座椅用电动滑轨技术条件 |
Technical Specification of Power Slide for Passenger Car Seat |
|
2010-8-16 |
2010-12-1 |
| QC/T 832-2010 |
水暖式汽车尾气加热器 |
Vehicle exhaust gas-operated water heating radiator |
|
2010-8-16 |
2010-12-1 |
| QC/T 833-2010 |
汽车空调用压力安全阀技术条件 |
Pressure relidf valve for automobile air conditioning system |
|
2010-8-16 |
2010-12-1 |
| QC/T 834-2010 |
汽车空调斜板式变排量压缩机总成技术条件 |
Variable displacement swash plate type compressor assembly for automobile air conditioning |
|
2010-8-16 |
2010-12-1 |
| QC/T 835-2010 |
汽车空调用双向斜板式定排量压缩机总成技术条件 |
Fixed displacement compressor assembly with double headed swash plate for automobile air conditioning system |
|
2010-8-16 |
2010-12-1 |
| QC/T 836-2010 |
专用汽车类别及代码 |
Classification and code of special purpose vehicle |
|
2010-8-16 |
2010-12-1 |
| QC/T 14-2009 |
汽车用轮胎气压表 |
Tyre air-pressure gauge for automobile |
全部代替：QC/T 14-1992 |
2009-11-17 |
2010-4-1 |
| QC/T 227.1-2009 |
摩托车和轻便摩托车制动片摩擦性能试验方法 |
Test methods of the friction perfamance of brake lining for motorcycles and mopeds |
全部代替：QC/T 227.1-1997 |
2009-11-17 |
2010-4-1 |
| QC/T 227.2-2009 |
摩托车和轻便摩托车制动片粘结剪切强度试验方法 |
Test methods of the adhesive bonding shearing strength of brake lining for motorcycles and mopeds |
全部代替：QC/T 227.2-1997 |
2009-11-17 |
2010-4-1 |
| QC/T 232-2009 |
摩托车和轻便摩托车制动手柄强度要求及试验方法 |
Strength requirements and test methods for brake handle of motorcycles and mopeds |
全部代替：QC/T 232-1997 |
2009-11-17 |
2010-4-1 |
| QC/T 44-2009 |
汽车风窗玻璃电动刮水器 |
Vehicle-windshield window wiper of motor |
全部代替：QC/T 44-1997 |
2009-11-17 |
2010-4-1 |
| QC/T 462-2009 |
汽车发动机工作小时表 |
Automobile engine working hourmeter |
全部代替：QC/T 462-1999 |
2009-11-17 |
2010-4-1 |
| QC/T 60-2009 |
摩托车和轻便摩托车整车性能台架试验方法 |
Methods of running test on bench for motorcycles and mopeds |
全部代替：QC/T 60-1993 |
2009-11-17 |
2010-4-1 |
| QC/T 631-2009 |
汽车排气消声器总成技术条件和试验方法 |
Automotive exhaust muffler assembly technical specification and test methods |
全部代替：QC/T 631-1999,QC/T 630-1999 |
2009-11-17 |
2010-4-1 |
| QC/T 633-2009 |
客车座椅 |
The seats of passenger vehicles |
全部代替：QC/T 633-2000 |
2009-11-17 |
2010-4-1 |
| QC/T 658-2009 |
汽车空调制冷系统性能道路试验方法 |
Air-conditioning refrigeration system performances road test method for motor vehicles |
全部代替：QC/T 658-2000 |
2009-11-17 |
2010-4-1 |
| QC/T 71-2009 |
摩托车和轻便摩托车轮辋 |
Rims of motorcycles and mopeds |
全部代替：QC/T 71-1993 |
2009-11-17 |
2010-4-1 |
| QC/T 807-2009 |
除雪车 |
Snow removal vehicle |
|
2009-11-17 |
2010-4-1 |
| QC/T 808-2009 |
采血车技术条件 |
Technical specifications for bloodmobile |
|
2009-11-17 |
2010-4-1 |
| QC/T 809-2009 |
车用燃气喷嘴 |
Nozzle of Gas-fired Vehicle |
|
2009-11-17 |
2010-4-1 |
| QC/T 810-2009 |
汽车起动机用电磁开关技术条件 |
Solenoid Switch for automobile starters specification |
|
2009-11-17 |
2010-4-1 |
| QC/T 811-2009 |
沥青道路微波养护车 |
The microwave maintenance vehicle for bituminous pavement |
|
2009-11-17 |
2010-4-1 |
| QC/T 812-2009 |
柴油机曲轴箱油气分离器技术条件和试验方法 |
Specifications and test methods for oil separator for crankcase ventilation of diesel engine |
|
2009-11-17 |
2010-4-1 |
| QC/T 813-2009 |
二甲醚汽车专用装置技术要求 |
Technical requirements for special equipments of dimethyl-ether vehicles |
|
2009-11-17 |
2010-4-1 |
| QC/T 814-2009 |
二甲醚汽车专用装置的安装要求 |
Mounting requirements of special equipment for dimethyl-ether vehicles |
|
2009-11-17 |
2010-4-1 |
| QC/T 815-2009 |
快插式二甲醚汽车加注口 |
Quick-insert filling receptacle of DME vehicle |
|
2009-11-17 |
2010-4-1 |
| QC/T 816-2009 |
加氢车技术条件 |
Specification of mobile hydrogen refueling vehicles |
|
2009-11-17 |
2010-4-1 |
| QC/T 817-2009 |
摩托车和轻便摩托车簧片阀式二次空气补给机构耐久性要求与试验方法 |
Durability Requirements and Testing Methods of Reed Valve Type Second Air Injectors for Motorcycles and Mopeds |
|
2009-11-17 |
2010-4-1 |
| QC/T 818-2009 |
摩托车和轻便摩托车辐条式车轮 |
Spoke-wheels of motorcycles and mopeds |
|
2009-11-17 |
2010-4-1 |
| QC/T 819-2009 |
两轮摩托车和两轮轻便摩托车车架 |
Frame of two-wheel motorcycle and two-wheel moped |
|
2009-11-17 |
2010-4-1 |
| QC/T 820-2009 |
汽车、摩托车仪表用步进电机 |
Stepper motor for automobile and motorcycle instrument |
|
2009-11-17 |
2010-4-1 |
| QC/T 821-2009 |
汽车用发动机冷却水及润滑油温度传感器 |
Engine cold-water and oil temperature sensor for automobile |
|
2009-11-17 |
2010-4-1 |
| QC/T 822-2009 |
汽车用发动机润滑油压力传感器 |
Engine oil pressure sensor for automobile |
|
2009-11-17 |
2010-4-1 |
| QC/T 823-2009 |
汽车、摩托车用燃油传感器 |
Fuel sensor for automobile and motorcycle |
|
2009-11-17 |
2010-4-1 |
| QC/T 824-2009 |
汽车用转速传感器 |
Tachometer sensor for automobile |
|
2009-11-17 |
2010-4-1 |
| GB/T 24545-2009 |
车辆车速限制系统技术要求 |
Requirement of speed limitation system for motor vehicles |
|
2009-10-30 |
2010-7-1 |
| GB/T 24546-2009 |
摩托车重心位置的测量方法 |
Motorcycles - Measurement method for location of centre of gravity |
|
2009-10-30 |
2010-7-1 |
| GB/T 24547-2009 |
轻便摩托车重心位置的测量方法 |
Mopeds - Measurement method for location of centre of gravity |
|
2009-10-30 |
2010-7-1 |
| GB/T 24548-2009 |
燃料电池电动汽车 术语 |
Fuel cell electric vehicles - Terminology |
|
2009-10-30 |
2010-7-1 |
| GB/T 24549-2009 |
燃料电池电动汽车 安全要求 |
Fuel cell electric vehicles - Safety requirements |
|
2009-10-30 |
2010-7-1 |
| GB/T 24550-2009 |
汽车对行人的碰撞保护 |
The protection of motor vehicle for pedestrians in the event of a collision |
|
2009-10-30 |
2010-7-1 |
| GB/T 24551-2009 |
汽车安全带提醒装置 |
Safety belt reminder for motor vehicles |
|
2009-10-30 |
2010-7-1 |
| GB/T 24552-2009 |
电动汽车风窗玻璃除霜除雾系统的性能要求及试验方法 |
Electric vehicles - Windshield demisters and defrosters system - Performance requirements and test methods |
|
2009-10-30 |
2010-7-1 |
| GB/T 24553-2009 |
摩托车和轻便摩托车转向轮限位装置及最大转向角的技术要求和测定方法 |
Motorcycles and mopeds-limitative device to steering and maximum wheel steer angle-requirements and measurement methods |
|
2009-10-30 |
2010-7-1 |
| GB/T 24554-2009 |
燃料电池发动机性能试验方法 |
Performance test methods for fuel cell engines |
|
2009-10-30 |
2010-7-1 |
| GB/T 2933-2009 |
充气轮胎用车轮和轮辋的术语、规格代号和标志 |
Wheels and rims for pneumatic tyres - Vocabulary，designation and marking |
全部代替：GB/T 2933-1995 |
2009-10-30 |
2010-7-1 |
| GB/T 4970-2009 |
汽车平顺性试验方法 |
Method of running test - Automotive ride comfort |
全部代替：GB/T 5902-1986,GB/T 4970-1996 |
2009-10-30 |
2010-7-1 |
| GB/T 4971-2009 |
汽车平顺性术语和定义 |
Terms and definitions for automotive ride comfort |
全部代替：GB/T 4971-1985 |
2009-10-30 |
2010-7-1 |
| GB/T 5909-2009 |
商用车辆车轮性能要求和试验方法 |
Performance requirements and test methods of commercial vehicles wheels |
全部代替：GB/T 5909-1995 |
2009-10-30 |
2010-7-1 |
| GB 11550-2009 |
汽车座椅头枕强度要求和试验方法 |
Strength requirement and test of automobile seats head restraints |
全部代替：GB 11550-1995 |
2009-9-30 |
2011-1-1 |
| GB 11552-2009 |
乘用车内部凸出物 |
The interior fittings of passenger car |
全部代替：GB 11552-1999 |
2009-9-30 |
2012-1-1 |
| GB 11555-2009 |
汽车风窗玻璃除霜和除雾系统的性能和试验方法 |
Motor vehicles-windshield demisting and defrosting systems - Performance requirements and test methods |
全部代替：GB 11555-1994,GB 11556-1994 |
2009-9-30 |
2011-1-1 |
| GB 11566-2009 |
乘用车外部凸出物 |
External projections for passenger car |
全部代替：GB 11566-1995 |
2009-9-30 |
2011-1-1 |
| GB 24406-2009 |
专用小学生校车座椅及其车辆固定件的强度 |
The strength of seats and their anchorages of special school bus for schoolchildren |
|
2009-9-30 |
2010-7-1 |
| GB 24407-2009 |
专用小学生校车安全技术条件 |
The safety technique specifications of special schoolbus for schoolchildren |
|
2009-9-30 |
2010-7-1 |
| GB/T 24347-2009 |
电动汽车DC/DC变换器 |
The DC/DC converter for electric vehicles |
|
2009-9-30 |
2010-2-1 |
| GB 24155-2009 |
电动摩托车和电动轻便摩托车安全要求 |
Electric motorcycles and electric mopeds - Safety specifications |
|
2009-6-25 |
2010-1-1 |
| GB/T 24156-2009 |
电动摩托车和电动轻便摩托车 动力性能 试验方法 |
Electric motorcycles and electric mopeds - Power performance - Test methods |
|
2009-6-25 |
2010-1-1 |
| GB/T 24157-2009 |
电动摩托车和电动轻便摩托车能量消耗率和续驶里程试验方法 |
Electric motorcycles and electric mopeds - Energy consumption and range - Test procedures |
|
2009-6-25 |
2010-1-1 |
| GB/T 24158-2009 |
电动摩托车和电动轻便摩托车通用技术条件 |
Electric motorcycles and electric mopeds - General specifications |
|
2009-6-25 |
2010-1-1 |
| GB/T 18332.1-2009 |
电动道路车辆用铅酸蓄电池 |
Lead-acid batteries used for electric road vehicles |
全部代替：GB/T 18332.1-2001 |
2009-5-6 |
2009-11-1 |
| GB/T 12540-2009 |
汽车最小转弯直径、最小转弯通道圆直径和外摆值测量方法 |
Minimum turning circle diameter, minimum turning clearance circle diameter and out value test method for motor vehicles |
全部代替：GB/T 12540-1990 |
2009-3-23 |
2010-1-1 |
| GB/T 12542-2009 |
汽车热平衡能力道路试验方法 |
Thermal balance capacity on-road test method for motor vehicles |
全部代替：GB/T 12542-1990 |
2009-3-23 |
2010-1-1 |
| GB/T 12543-2009 |
汽车加速性能试验方法 |
Acceleration performance test method for motor vehicles |
全部代替：GB/T 12543-1990 |
2009-3-23 |
2010-1-1 |
| GB/T 12547-2009 |
汽车最低稳定车速试验方法 |
Minimum stable speed test method for motor vehicles |
全部代替：GB/T 12547-1990 |
2009-3-23 |
2010-1-1 |
| GB/T 13873-2009 |
道路车辆 货运挂车试验方法 |
Road vechiles - Trailer test procedure |
全部代替：GB/T 13873-1992 |
2009-3-23 |
2010-1-1 |
| GB/T 14172-2009 |
汽车静侧翻稳定性台架试验方法 |
Static roll stability test method for motor vehicles |
全部代替：GB/T 14172-1993 |
2009-3-23 |
2010-1-1 |
| GB/T 15087-2009 |
道路车辆 牵引车与牵引杆挂车机械连接装置 强度试验 |
Road vehicles - Drawbar couplings and eyes for hinged drawbars - Strength tests |
全部代替：GB/T 15087-1994 |
2009-3-23 |
2010-1-1 |
| GB/T 15088-2009 |
道路车辆 牵引销 强度试验 |
Road vehicles - Fifth wheel kingpins - Strength test |
全部代替：GB/T 15088-1994 |
2009-3-23 |
2010-1-1 |
| GB/T 17350-2009 |
专用汽车和专用挂车术语、代号和编制方法 |
Terms marks and designation for special purpose vehicles and special trailers |
全部代替：GB/T 17350-1998 |
2009-3-23 |
2010-1-1 |
| GB/T 23334-2009 |
开启式客车安全顶窗 |
Open-type roof escape hatch on bus |
|
2009-3-23 |
2010-1-1 |
| GB/T 23335-2009 |
天然气汽车定型试验规程 |
Natural gas vehicles - Engineering approval evaluation program |
|
2009-3-23 |
2010-1-1 |
| GB/T 23336-2009 |
半挂车通用技术条件 |
General technical requirements for semitrailer |
|
2009-3-23 |
2010-1-1 |
| GB/T 6792-2009 |
客车骨架应力和形变测量方法 |
Measure method of stress and deformation for bus skeleton |
全部代替：GB/T 6792-1996 |
2009-3-23 |
2010-1-1 |
| GB/T 7726-2009 |
铰接客车机械连接装置 |
Mechanical connections of articulated bus |
全部代替：GB/T 7726.2-1998,GB/T 7726.1-1998,GB/T 7726.3-1998,GB/T 7726.5-1998,GB/T 7726.4-1998 |
2009-3-23 |
2010-1-1 |
| GB 23254-2009 |
货车及挂车 车身反光标识 |
Retro-reflective markings for trucks and trailers |
|
2009-3-6 |
2009-7-1 |
| GB 23255-2009 |
汽车昼间行驶灯配光性能 |
Photometric characteristics of daytime running lamps for motor vehicles |
|
2009-3-6 |
2010-1-1 |
| GB 11554-2008 |
机动车和挂车用后雾灯配光性能 |
Photometric characteristics of rear fog lamp for power-driven vehicles and their trailers |
全部代替：GB 11554-1998 |
2008-12-31 |
2010-1-1 |
| GB 15365-2008 |
摩托车和轻便摩托车操纵件、指示器及信号装置的图形符号 |
Symbols for controls, indicators and telltales for motorcycles and mopeds |
全部代替：GB 15365-1994 |
2008-12-31 |
2009-7-1 |
| GB 15744-2008 |
摩托车燃油消耗量限值及测量方法 |
The limits and measurement methods of fuel consumption for motorcycles |
全部代替：GB/T 16486-1996,GB/T 15744-1995 |
2008-12-31 |
2009-7-1 |
| GB 16486-2008 |
轻便摩托车燃油消耗量限值及测量方法 |
The limits and measurement methods of fuel consumption for mopeds |
全部代替：GB/T 16486-1996,GB/T 15744-1995 |
2008-12-31 |
2009-7-1 |
| GB 17509-2008 |
汽车及挂车转向信号灯配光性能 |
Photometric characteristics of direction indicators for motor vehicles and their trailers |
全部代替：GB 17509-1998 |
2008-12-31 |
2010-1-1 |
| GB 22757-2008 |
轻型汽车燃料消耗量标识 |
Fuel consumption label for light vehicle |
|
2008-12-31 |
2009-7-1 |
| GB 5920-2008 |
汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能 |
Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers |
全部代替：GB 5920-1999 |
2008-12-31 |
2010-1-1 |
| GB/T 12545.1-2008 |
汽车燃料消耗量试验方法 第1部分：乘用车燃料消耗量试验方法 |
Measurement methods of fuel consumption for automobiles - Part 1: Measurement methods of fuel consumption for passenger cars |
全部代替：GB/T 12545.1-2001 部分代替：GB/T 12545.2-2001 |
2008-12-31 |
2009-7-1 |
| GB/T 5345-2008 |
道路车辆 石油基或非石油基制动液容器的标识 |
Road vehicles - Labelling of containers for petroleum-based or non- petroleum-based brake fluid |
全部代替：GB/T 5345-1985,GB/T 14168-1993 |
2008-12-31 |
2009-7-1 |
| GB/T 22630-2008 |
车载音视频设备电磁兼容性要求和测量方法 |
Audio video-apparatus on board electromagnetic compatibility requirement and methods of measurement |
|
2008-12-23 |
2009-6-1 |
| GB 18564.2-2008 |
道路运输液体危险货物罐式车辆 第2部分：非金属常压罐体技术要求 |
Road tanker for dangerous liquid goods transportation - Part 2: Technical requirements of atmospheric pressure non-metal tank |
部分代替：GB 18564-2001 |
2008-12-11 |
2009-7-1 |
| GB/T 15028-2008 |
摩托车和轻便摩托车操纵稳定性术语 |
Motorcycles and mopeds - Terminology of control lability and stability |
全部代替：GB/T 15028.3-1994,GB/T 15028.2-1994,GB/T 15028.4-1994,GB/T 15028.1-1994 |
2008-11-28 |
2009-6-1 |
| GB/T 15366-2008 |
摩托车和轻便摩托车操纵装置的型式、位置及基本要求 |
Types, positions and performance requirements for controls of motorcycles and mopeds |
全部代替：GB/T 15366-1994 |
2008-11-28 |
2009-6-1 |
| GB/T 15367-2008 |
摩托车和轻便摩托车 两轮车和三轮车零部件名称 |
Motorcycles and mopeds part and component - Designations for vehicle with two and three wheels |
全部代替：GB/T 5359.4-1994,GB/T 15367-1994 |
2008-11-28 |
2009-6-1 |
| GB/T 22550-2008 |
旅居车辆 术语及其定义 |
Leisure accommodation vehicles - Vocabulary |
|
2008-11-28 |
2009-6-1 |
| GB/T 22551-2008 |
旅居车辆 旅居挂车 居住要求 |
Leisure accommodation vehicles - Caravans - Habitation requirements |
|
2008-11-28 |
2009-6-1 |
| GB/T 22552-2008 |
旅居挂车 质量和尺寸 术语及其定义 |
Caravans - Masses and dimensions - Vocabulary |
|
2008-11-28 |
2009-6-1 |
| GB/T 4570-2008 |
摩托车和轻便摩托车耐久性试验方法 |
Test method of durability for motorcycles and mopeds |
全部代替：GB/T 4570-1995 |
2008-11-28 |
2009-6-1 |
| GB/T 5359.1-2008 |
摩托车和轻便摩托车术语 第1部分：车辆类型 |
Term for motorcycles and mopeds - Part 1: Types of vehicles |
全部代替：GB/T 5359.1-1996 |
2008-11-28 |
2009-6-1 |
| GB/T 5359.2-2008 |
摩托车和轻便摩托车术语 第2部分：车辆性能 |
Term for motorcycles and mopeds - Part 2: Performance of vehicles |
全部代替：GB/T 5359.2-1996 |
2008-11-28 |
2009-6-1 |
| GB/T 5359.3-2008 |
摩托车和轻便摩托车术语 第3部分：两轮车和三轮车尺寸 |
Term for motorcycles and mopeds - Part 3: Dimensions of vehicle with two and three wheels |
全部代替：GB/T 5359.3-1996,GB/T 5359.7-1996 |
2008-11-28 |
2009-6-1 |
| GB/T 5359.4-2008 |
摩托车和轻便摩托车术语 第4部分：两轮车和三轮车质量 |
Term for motorcycles and mopeds - Part 4: Mass of vehicle with two and three wheels |
全部代替：GB/T 5359.6-1996,GB/T 5359.5-1996 |
2008-11-28 |
2009-6-1 |
| GB/T 5374-2008 |
摩托车和轻便摩托车可靠性试验方法 |
Test method of reliability for motorcycles and mopeds |
全部代替：GB/T 5374-1995 |
2008-11-28 |
2009-6-1 |
| GB 11564-2008 |
机动车回复反射器 |
Retro-reflector device for motor vehicles |
全部代替：GB 11564-1998 |
2008-11-10 |
2009-5-1 |
| GB 17510-2008 |
摩托车光信号装置配光性能 |
Photometric characteristics of light-signalling devices for motorcycles |
全部代替：GB 17510-1998 |
2008-11-10 |
2009-5-1 |
| GB/T 22435-2008 |
摩托车和轻便摩托车轻合金车轮 |
light-alloy wheels for motorcycles and mopeds |
|
2008-10-20 |
2009-4-1 |
| GB/T 22436-2008 |
摩托车和轻便摩托车轮毂安装尺寸系列 |
Series of mounting dimensions for wheel hub of motorcycles and mopeds |
|
2008-10-20 |
2009-4-1 |
| GB/T 5335-2008 |
汽车液压制动装置压力测试连接器技术要求 |
Automobile pressure test connection for hydraulic braking equipment |
全部代替：GB/T 5335-1985 |
2008-10-20 |
2009-4-1 |
| GB/T 5363-2008 |
摩托车和轻便摩托车发动机台架试验方法 |
Method of bench test of engine for motorcycles and mopeds |
全部代替：GB/T 5363-1995 |
2008-10-20 |
2009-4-1 |
| GB/T 5378-2008 |
摩托车和轻便摩托车道路试验方法 |
Methods of road test for motorcycles and mopeds |
全部代替：GB/T 5387-1994,GB/T 5381-1994,GB/T 15364-1994,GB/T 5376-1996,GB/T 5386-1994,GB/T 5383-1994,GB/T 5384-1996,GB/T 5378-1994,GB/T 16708-1996,GB/T 5385-1994,GB/T 15363-1994 |
2008-10-20 |
2009-4-1 |
| GB/T 5382-2008 |
摩托车和轻便摩托车制动力要求及试验方法 |
Performance and measurement method for braking force of motorcycles and mopeds |
全部代替：GB/T 5382.2-1996 部分代替：GB 17355-1998 |
2008-10-20 |
2009-4-1 |
| GB/T 5922-2008 |
汽车和挂车 气压制动装置压力测试连接器技术要求 |
Motor vehicles and towed vehicles - Pressure test connection for compressed-air pneumatic braking equipment |
全部代替：GB/T 5922-1986 |
2008-10-20 |
2009-4-1 |
| GB/T 5054.1-2008 |
道路车辆 多芯连接电缆 第1部分：普通护套电缆的性能要求和试验方法 |
Road vehicles - Multi-core connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables |
|
2008-9-24 |
2009-7-1 |
| GB/T 5054.2-2008 |
道路车辆 多芯连接电缆 第2部分：高性能护套电缆的性能要求和试验方法 |
Road vehicles - Multi-core connecting cables - Part 2: Test methods and requirements for high performance sheathed cables |
|
2008-9-24 |
2009-7-1 |
| GB/T 5054.4-2008 |
道路车辆 多芯连接电缆 第4部分：螺旋电缆组件的弯折试验方法和要求 |
Road vehicles - Multi-core connecting cables - Part 4: Articulation test method and requirements for coiled cable assemblies |
|
2008-9-24 |
2009-7-1 |
| GB/T 21437.1-2008 |
道路车辆 由传导和耦合引起的电骚扰 第1部分: 定义和一般描述 |
Road vehicles - Electrical distrubances from conduction and coupling -Part 1: Definitions and general considerations |
|
2008-6-19 |
2009-4-1 |
| QC/T 275-2008 |
汽车发动机镶耐磨圈活塞金相检验 |
Metallographic examination of piston with ringcarrier for automotive engines |
全部代替：QC/T 275-1999 |
2008-6-16 |
2008-12-1 |
| QC/T 553-2008 |
汽车、摩托车发动机铸造铝活塞金相检验 |
Metallographic examination of piston for engines of automobile and motorcycle |
全部代替：QC/T 553-1999 |
2008-6-16 |
2008-12-1 |
| QC/T 626-2008 |
汽车玻璃升降器 |
Motor vehicles - window regulators |
全部代替：QC/T 626-1999 |
2008-6-16 |
2008-12-1 |
| QC/T 802-2008 |
摩托车和轻便摩托车产品图样和设计文件的基本要求 |
General principles of drawing and document for motorcycles and mopeds |
|
2008-6-16 |
2008-12-1 |
| QC/T 803.1-2008 |
车用氧传感器技术条件 第1部分：管形加热型氧传感器 |
Technical specification of the oxygen sensor for motor vehicles Part 1:Tube type heated lambda sensor |
|
2008-6-16 |
2008-12-1 |
| QC/T 804-2008 |
乘用车仪表板 |
Instrument Panel for passenger cars |
|
2008-6-16 |
2008-12-1 |
| QC/T 805-2008 |
乘用车座椅用滑轨技术条件 |
Passenger car - Technique specification of slide for seat |
|
2008-6-16 |
2008-12-1 |
| QC/T 806-2008 |
汽车空调压缩机用电磁离合器技术条件 |
Technical specification of electromagnetic clutch for compressor of A/C |
|
2008-6-16 |
2008-12-1 |
| QC/T 235-2008 |
摩托车和轻便摩托车排气消声器技术要求和试验方法 |
Specification and test methods for exhaust muffler of motorcycles and mopeds |
全部代替：QC/T 235-1997 |
2008-6-4 |
2008-11-1 |
| QC/T 311-2008 |
汽车液压制动主缸性能要求及台架试验方法 |
Performance requirements and bench test methods of automobile brake master cylinder |
全部代替：QC/T 311-1993 |
2008-6-4 |
2008-11-1 |
| QC/T 564-2008 |
乘用车制动器性能要求及台架试验方法 |
Performance requirements and bench test methods for passenger car brake |
全部代替：QC/T 564-1999,QC/T 582-1999 |
2008-6-4 |
2008-11-1 |
| QC/T 61-2008 |
摩托车和轻便摩托车发动机强化试验技术要求及试验方法 |
Specifications and test methods on intensifying test of engine of motorcycles and mopeds |
全部代替：QC/T 61-1993 |
2008-6-4 |
2008-11-1 |
| QC/T 79.1-2008 |
道路车辆 牵引车和挂车之间气制动连接用螺旋管总成第1部分：尺寸 |
Road vehicles -- Coiled pipe assemblies for Pneumatic braking connectin between motor vehicles and towed vehicles -- Part 1:Dimensions |
全部代替：QC/T 79-1993 |
2008-6-4 |
2008-11-1 |
| QC/T 79.2-2008 |
道路车辆 牵引车和挂车之间气制动连接用螺旋管总成第2部分：性能要求 |
Road vehicles -- Coiled pipe assemblies for Pneumatic braking connectin between motor vehicles and towed vehicles -- Part 2:Performance requirements |
全部代替：QC/T 79-1993 |
2008-6-4 |
2008-11-1 |
| QC/T 800-2008 |
摩托车和轻便摩托车自动离合无级变速器性能台架试验方法 |
Method of bed test of continuously variable transmission for motorcycles and mopeds |
|
2008-6-4 |
2008-11-1 |
| QC/T 801-2008 |
摩托车和轻便摩托车簧片阀式二次空气补给机构技术要求和试验方法 |
Technical requirements and testing methods of reed valve type second air injectors for motorcycles and mopeds |
|
2008-6-4 |
2008-11-1 |
| GB 21668-2008 |
危险货物运输车辆结构要求 |
Provisions of vehicles for the carriage of dangerous goods with regard to their specific constructional features |
|
2008-4-25 |
2008-11-1 |
| GB 21670-2008 |
乘用车制动系统技术要求及试验方法 |
Technical requirements and testing methods for passenger car braking systems |
|
2008-4-25 |
2008-11-1 |
| GB 15082-2008 |
汽车用车速表 |
Speed meters for motor vehicle |
全部代替：GB 15082-1999 |
2008-4-16 |
2008-10-1 |
| GB/T 21436-2008 |
汽车泊车测距警示装置 |
Parking distance monitoring & warning device for motovehicle |
|
2008-2-15 |
2008-9-1 |
| GB/T 21437.2-2008 |
道路车辆 由传导和耦合引起的电骚扰 第2部分：沿电源线的电瞬态传导 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only |
|
2008-2-15 |
2008-9-1 |
| GB/T 13053-2008 |
客车车内尺寸 |
Bus inner dimensions |
全部代替：GB/T 13056-1991,GB/T 13053-1991,GB/T 13055-1991,GB/T 13054-1991 |
2008-2-3 |
2008-8-1 |
| GB/T 16887-2008 |
卧铺客车结构安全要求 |
Safety requirements for sleeper bus construction |
全部代替：GB/T 16887-1997 |
2008-2-3 |
2008-8-1 |
| GB/T 19233-2008 |
轻型汽车燃料消耗量试验方法 |
Measurement methods of fuel consumption for light-duty vehicles |
全部代替：GB/T 19233-2003 |
2008-2-3 |
2008-8-1 |
| QC/T 796-2008 |
汽车燃料消耗量标识 |
Automobile fuel consumption labels |
|
2008-2-1 |
2008-7-1 |
| QC/T 797-2008 |
汽车塑料件、橡胶件和热塑性弹性体件的材料标识和标记 |
Material Identification & Marking of Automotive Plastic, Rubber & Thermoplastic Elastomer Parts |
|
2008-2-1 |
2008-7-1 |
| QC/T 798-2008 |
汽车用多层塑料燃油管 |
Multi-layers plastic tubing for automotive fuel system |
|
2008-2-1 |
2008-7-1 |
| QC/T 799-2008 |
伸缩式皮带输送车 |
Telescopic belt truck conveyor |
|
2008-2-1 |
2008-7-1 |
| GB/T 18387-2008 |
电动车辆的电磁场发射强度的限值和测量方法,宽带,9kHz～30MHz |
Limits and test methods of magnetic and electric field strength from electric vehicles, Broadband, 9kHz to 30MHz |
全部代替：GB/T 18387-2001 |
2008-1-22 |
2008-9-1 |
| GB/T 21360-2008 |
汽车空调用制冷剂压缩机 |
Refrigerantor compressor for motor vehicle air conditioning |
|
2008-1-14 |
2008-5-1 |
| GB/T 21361-2008 |
汽车用空调器 |
Motor vehicle air-conditioning unit |
|
2008-1-14 |
2008-5-1 |
| QC/T 208-2007 |
汽车用温度报警器 |
Temperature alarms for automobile |
全部代替：QC/T 208-1996 |
2007-11-14 |
2008-5-1 |
| QC/T 209-2007 |
汽车、摩托车用软轴 |
Flexible shaft ofr automobile and motorcycle |
全部代替：QC/T 209-1996 |
2007-11-14 |
2008-5-1 |
| QC/T 213-2007 |
汽车、摩托车仪表术语 |
Automobile and motorcycle instrument terminology |
全部代替：QC/T 213-1996 |
2007-11-14 |
2008-5-1 |
| QC/T 215-2007 |
汽车、摩托车仪表型号编制方法 |
Type methodology for automobile and motorcycle instrument |
全部代替：QC/T 215-1996 |
2007-11-14 |
2008-5-1 |
| QC/T 217-2007 |
汽车用压力报警器 |
Pressure alarms for automobile |
全部代替：QC/T 217-1996 |
2007-11-14 |
2008-5-1 |
| QC/T 323-2007 |
汽车门锁和车门保持件 |
Motor vehicles - Door locks and door retention components |
全部代替：QC/T 323-1999,QC/T 586-1999 |
2007-11-14 |
2008-5-1 |
| QC/T 476-2007 |
客车防雨密封性限值及试验方法 |
Rain proof performance limit and test method for bus |
全部代替：QC/T 476-1999,GB/T 12480-1990* |
2007-11-14 |
2008-5-1 |
| QC/T 518-2007 |
汽车用螺纹紧固件紧固扭矩 |
Tightening torque for automotive threaded fasteners |
全部代替：QC/T 518-1999 |
2007-11-14 |
2008-5-1 |
| QC/T 634-2007 |
汽车水暖式暖风装置 |
Vehicle water-heating air heater mechanism |
全部代替：QC/T 634-2000 |
2007-11-14 |
2008-5-1 |
| QC/T 673-2007 |
汽车用液化石油气电磁阀 |
Solenoid valve of LPG vehicles |
全部代替：QC/T 673-2000 |
2007-11-14 |
2008-5-1 |
| QC/T 674-2007 |
汽车用压缩天然气电磁阀 |
Solenoid valve of CNG vehicles |
全部代替：QC/T 674-2000 |
2007-11-14 |
2008-5-1 |
| QC/T 688-2007 |
摩托车和轻便摩托车通用技术条件 |
General specifications of motorcycles and mopeds |
全部代替：QC/T 688-2002 |
2007-11-14 |
2008-5-1 |
| QC/T 727-2007 |
汽车、摩托车用仪表 |
Instrument for automobile and motorcycle |
全部代替：QC/T 727-2004 |
2007-11-14 |
2008-5-1 |
| QC/T 780-2007 |
摩托车用液冷散热器 |
Water radiator used in motorcycles |
|
2007-11-14 |
2008-5-1 |
| QC/T 781-2007 |
摩托车和轻便摩托车制动盘 |
Braking disc for motorcycles and mopeds |
|
2007-11-14 |
2008-5-1 |
| QC/T 782-2007 |
自卸汽车密闭式顶盖 技术条件 |
Dump cover - Specifications |
|
2007-11-14 |
2008-5-1 |
| QC/T 783-2007 |
汽车、摩托车用车速传感器 |
Speedometer sensor for automobile and motorcycle |
|
2007-11-14 |
2008-5-1 |
| QC/T 784-2007 |
汽车、摩托车仪表用场致发光屏 |
Electroluminescent screen for automobile and motorcycle instrument |
|
2007-11-14 |
2008-5-1 |
| QC/T 785-2007 |
汽车 柴油机 双级燃油滤清器安装和连接尺寸 |
Road vehicles - Two-stage fuel filters for compression - ignition engines - Mounting and connecting dimensions |
|
2007-11-14 |
2008-5-1 |
| QC/T 786-2007 |
汽车 柴油机 具有垂直安装面的燃油滤清器 安装和连接尺寸 |
Diesel engines - heads for fuel filters with vertical flange - Mounting and connecting dimensions |
|
2007-11-14 |
2008-5-1 |
| QC/T 787-2007 |
汽车 柴油机 具有水平安装面的燃油滤清器滤座 安装和连接尺寸 |
Diesel engines - heads for fuel filters with horizontal flange - mounting and connecting dimensions |
|
2007-11-14 |
2008-5-1 |
| QC/T 788-2007 |
汽车踏板装置性能要求及台架试验方法 |
Performance requirements and bench test methods of automobile pedal device |
|
2007-11-14 |
2008-5-1 |
| QC/T 789-2007 |
汽车电涡流缓速器总成性能要求及台架试验方法 |
Performance requirements and bench test methods of automobile electric vortex retarder assembly |
|
2007-11-14 |
2008-5-1 |
| QC/T 790-2007 |
制动气室性能要求及台架试验方法 |
Performance requirements and bench test methods for brake chamber |
|
2007-11-14 |
2008-5-1 |
| QC/T 791-2007 |
电动摩托车和电动轻便摩托车定型试验规程 |
Electric motorcycles and electric mopeds - Engineering approval evaluation program |
|
2007-11-14 |
2008-5-1 |
| QC/T 792-2007 |
电动摩托车和电动轻便摩托车用电机及控制器技术条件 |
Motors and controllers for electric motorcycles and electric mopeds |
|
2007-11-14 |
2008-5-1 |
| QC/T 793-2007 |
摩托车和轻便摩托车空气滤清器技术条件与试验方法 |
Specifications and test methods of air filters for motorcycles and scooters |
|
2007-11-14 |
2008-5-1 |
| QC/T 794-2007 |
内燃机工业滤纸 |
Internal - combustion engine industry filter paper |
|
2007-11-14 |
2008-5-1 |
| QC/T 795.1-2007 |
道路车辆 乘驾室用空气滤清器 第1部分:粉尘过滤测试 |
Road vehicles - Air filters for passenger compartment Part 1: test for particulate filtration |
|
2007-11-14 |
2008-5-1 |
| QC/T 795.2-2007 |
道路车辆 乘驾室用空气滤清器 第1部分:气体过滤测试 |
Road vehicles - Air filters for passenger compartment Part 2: Test for gaseous filtration |
|
2007-11-14 |
2008-5-1 |
| GB 15235-2007 |
汽车及挂车倒车灯配光性能 |
Photometric characteristics of reversing lamps for power-driven vehicles |
全部代替：GB 15235-1994 |
2007-11-1 |
2008-6-1 |
| GB 21259-2007 |
汽车用气体放电光源前照灯 |
Headlamps equipped with gas - discharge light sources for motor vehicle |
|
2007-11-1 |
2008-6-1 |
| GB/T 21260-2007 |
汽车用前照灯清洗器 |
Headlamp cleaner |
|
2007-11-1 |
2008-6-1 |
| GB 4599-2007 |
汽车用灯丝灯泡前照灯 |
Motor vehicle headlamps equipped with filament lamps |
全部代替：GB 4599-1994 |
2007-11-1 |
2008-6-1 |
| GB 4660-2007 |
汽车用灯丝灯泡前雾灯 |
Motor vehicle front fog lamps equipped with filament lamps |
全部代替：GB 4660-1994 |
2007-11-1 |
2008-6-1 |
| GB 4785-2007 |
汽车及挂车外部照明和光信号装置的安装规定 |
Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers |
全部代替：GB 4785-1998 |
2007-11-1 |
2008-6-1 |
| GB/T 21085-2007 |
机动车出厂合格证 |
Certificate of Vehicle |
|
2007-9-10 |
2008-4-1 |
| GB/T 21055-2007 |
肢体残疾人驾驶汽车的操纵辅助装置 |
Assistive devices of car manipulation for persons with physical disabilities |
|
2007-8-13 |
2008-3-1 |
| GB 13094-2007 |
客车结构安全要求 |
The safety requiements for bus construction |
全部代替：GB 13094-1997 |
2007-7-19 |
2008-2-1 |
| GB 20997-2007 |
轻型商用车辆燃料消耗量限值 |
Limits of fuel consumption for light duty commercial vehicles |
|
2007-7-19 |
2008-2-1 |
| GB/T 10485-2007 |
道路车辆 外部照明和光信号装置 环境耐久性 |
Road vehicles - Lighting and light-signalling devices - Environmental endurance |
全部代替：GB/T 10485-1989 |
2007-4-30 |
2007-12-1 |
| GB/T 12535-2007 |
汽车起动性能试验方法 |
Motor vehicle - Starting performance - Test method |
全部代替：GB/T 12535-1990 |
2007-4-30 |
2007-12-1 |
| GB/T 12546-2007 |
汽车隔热通风试验方法 |
Motor vehicle - Ventilation and heat Insulation - Test method |
全部代替：GB/T 12546-1990 |
2007-4-30 |
2007-12-1 |
| GB/T 12782-2007 |
汽车采暖性能要求和试验方法 |
Motor vehicle - Heating performance requirement - Test method |
全部代替：GB/T 12782-1991 |
2007-4-30 |
2007-12-1 |
| GB/T 13880-2007 |
道路车辆 牵引座互换性 |
Road vehicles - Fifth wheels - Interchangeability |
全部代替：GB/T 13880-1992 |
2007-4-30 |
2007-11-1 |
| GB/T 20913-2007 |
乘用车正面偏置碰撞的乘员保护 |
The protection of the occupants in the event of an off-set frontal collision for passenger car |
|
2007-4-30 |
2007-12-1 |
| GB/T 20912-2007 |
汽车用液化石油气蒸发调节器 |
Vaporizer /pressure regulator of LPG vehicle |
|
2007-4-13 |
2007-11-1 |
| QC/T 224-2007 |
摩托车和轻便摩托车发动机通用技术条件 |
Specifications of Engine used in Motorcycles and Mopeds |
全部代替：QC/T 224-1997 |
2007-3-6 |
2007-9-1 |
| QC/T 62-2007 |
摩托车和轻便摩托车减震器 |
Shock sbsorber for motorcycle and moped |
全部代替：QC/T 62-1993,QC/T 63-1993 |
2007-3-6 |
2007-9-1 |
| QC/T 775-2007 |
乘用车类别及代码 |
Classification and code of passenger cars |
|
2007-3-6 |
2007-3-6 |
| QC/T 776-2007 |
旅居车 |
Motor caravan |
|
2007-3-6 |
2007-9-1 |
| QC/T 777-2007 |
汽车电磁风扇离合器技术条件 |
|
|
2007-3-6 |
2007-9-1 |
| QC/T 778-2007 |
摩托车和轻便摩托车电气零部件试验电压 |
Testing voltage for motorcycles and mopeds electric equipment |
|
2007-3-6 |
2007-9-1 |
| QC/T 779-2007 |
摩托车和轻便摩托车用火花塞帽 技术条件 |
Technical specification of spark plug cap for motorcycles and mopeds |
|
2007-3-6 |
2007-9-1 |
| GB/T 20734-2006 |
液化天然气汽车专用装置安装要求 |
Mounting requirements for liquefied natural gas vehicle special equipment |
|
2006-12-29 |
2007-6-1 |
| GB/T 20735-2006 |
汽车用压缩天然气减压调节器 |
pressure regulator of CNG vehicles |
|
2006-12-29 |
2007-6-1 |
| GB/T 20714-2006 |
火花塞 接线端子 |
Spark-plugs - Terminals |
|
2006-12-19 |
2007-5-1 |
| GB/T 20716.1-2006 |
道路车辆 牵引车和挂车之间的电连接器 第1部分：24V标称电压车辆的制动系统和行走系的连接 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gears of vehicles with 24V nominal supply voltage |
|
2006-12-19 |
2007-8-1 |
| GB/T 20716.2-2006 |
道路车辆 牵引车和挂车之间的电连接器 第2部分：12V标称电压车辆的制动系统和行走系的连接 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gears of vehicles with 12V nominal supply voltage |
|
2006-12-19 |
2007-8-1 |
| GB/T 20717-2006 |
道路车辆 牵引车和挂车之间的电连接器 24V15芯型 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24V nominal supply voltage |
|
2006-12-19 |
2007-8-1 |
| GB/T 20718-2006 |
道路车辆 牵引车和挂车之间的电连接器 12V13芯型 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connector for vehicles with 12V nominal supply voltage |
|
2006-12-19 |
2007-8-1 |
| GB/T 5053.1-2006 |
道路车辆 牵引车与挂车之间电连接器 7芯24V标准型(24N) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage |
全部代替：GB/T 5053.1-1985 |
2006-12-19 |
2007-8-1 |
| GB/T 5053.2-2006 |
道路车辆 牵引车与挂车之间电连接器 7芯12V标准型（12N） |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage |
全部代替：GB/T 5053.2-1985 |
2006-12-19 |
2007-8-1 |
| GB/T 5053.3-2006 |
道路车辆 牵引车与挂车之间电连接器 定义、试验方法和要求 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions,tests and requirements |
全部代替：GB/T 5053.3-1985 |
2006-12-19 |
2007-8-1 |
| GB/T 5054.3-2006 |
道路车辆 多芯电缆线 第3部分：无屏蔽护套低压电缆线的结构、尺寸和标记 |
Road vehicles - Multicore connecting cables -Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables |
全部代替：GB/T 5054-1985 |
2006-12-19 |
2007-8-1 |
| GB/T 5373-2006 |
摩托车和轻便摩托车尺寸和质量参数的测定方法 |
Measuring method of dimensions and masses parameter for motorcycles and mopeds |
全部代替：GB/T 5373-1994 |
2006-12-19 |
2007-5-1 |
| GB/T 5375-2006 |
摩托车和轻便摩托车型号编制方法 |
Code of designation for motorcycles and mopeds |
全部代替：GB/T 5375-1998 |
2006-12-19 |
2007-5-1 |
| QC/T 32-2006 |
汽车用空气滤清器试验方法 |
Test methods of air cleaners for automobiles |
全部代替：QC/T 32-1992 |
2006-12-17 |
2007-5-1 |
| QC/T 768-2006 |
客车冲水式卫生间 |
Coach flush toilet |
|
2006-12-17 |
2007-5-1 |
| QC/T 769-2006 |
汽车燃气加热器 |
Gas fired heater for vehicle |
|
2006-12-17 |
2007-5-1 |
| QC/T 770-2006 |
汽车用干式空气滤清器总成技术条件 |
Specification for dry type air cleaner assembly of automobiles |
|
2006-12-17 |
2007-5-1 |
| QC/T 771-2006 |
汽车柴油机纸质滤芯柴油细滤器总成技术条件 |
Specificastions of diesel-fuel fine filter assembly with paper element for automotive diesels |
|
2006-12-17 |
2007-5-1 |
| QC/T 772-2006 |
汽车用柴油滤清器试验方法 |
Test methods of diesel-fuel filter for automobiles |
|
2006-12-17 |
2007-5-1 |
| QC/T 773-2006 |
汽车散热器电动风扇技术条件 |
Cooling fan module specification for automobile |
|
2006-12-17 |
2007-5-1 |
| QC/T 774-2006 |
汽车交流发电机用电子电压调节器技术条件 |
Technical specification for electronic voltage regulator for automotive alternator |
|
2006-12-17 |
2007-5-1 |
| GB/T 18488.1-2006 |
电动汽车用电机及其控制器 第1部分：技术条件 |
The electrical machines and controllers for electric vehicles - Part 1：General specification |
全部代替：GB/T 18488.1-2001 |
2006-12-1 |
2007-7-1 |
| GB/T 18488.2-2006 |
电动汽车用电机及其控制器 第2部分：试验方法 |
The electrical machines and controllers for electric vehicles - Part 2: Test methods |
全部代替：GB/T 18488.2-2001 |
2006-12-1 |
2007-7-1 |
| QC/T 761-2006 |
汽车空气滤清器接头 A型和B型 |
|
全部代替：GB/T 14169-1993 |
2006-9-8 |
2006-10-11 |
| QC/T 763-2006 |
汽车 发动机旋装式机油滤清器 连接尺寸 |
|
全部代替：GB/T 8409-1999 |
2006-9-8 |
2006-10-11 |
| QC/T 764-2006 |
汽车液压制动系 金属管、内外螺纹管接头和软管端部接头 |
|
全部代替：GB/T 11611-1989 |
2006-9-8 |
2006-10-11 |
| QC/T 765-2006 |
载货汽车空气滤清器滤芯尺寸规范 |
|
全部代替：GB/T 14170-1993 |
2006-9-8 |
2006-10-11 |
| QC/T 766-2006 |
客车安全顶窗 |
|
|
2006-9-8 |
2006-10-11 |
| QC/T 767-2006 |
汽车 柴油机旋装式燃油滤清器 安装和连接尺寸 |
|
全部代替：GB/T 17653-1999 |
2006-9-8 |
2006-10-11 |
| GB 14167-2006 |
汽车安全带安装固定点 |
Safety-belt anchorages for vehicles |
|
2006-9-1 |
2007-2-1 |
| GB 15083-2006 |
汽车座椅、座椅固定装置及头枕强度要求和试验方法 |
Strength requirement and test of automobile seats, their anchorages and any head restraints |
全部代替：GB 15083-1994 |
2006-9-1 |
2007-2-1 |
| GB 15740-2006 |
汽车防盗装置 |
Protective devices against unauthorized use of motor vehicles |
全部代替：GB 15740-1995 |
2006-9-1 |
2007-9-1 |
| QC/T 754-2006 |
液化天然气汽车定型试验规程 |
Specifications for liquefied natural gas vehicle |
|
2006-7-26 |
2007-2-1 |
| QC/T 755-2006 |
液化天然气(LNG)汽车专用装置技术条件 |
Technology requirements of special equipment for LNG vehicle |
|
2006-7-26 |
2007-2-1 |
| QC/T 756-2006 |
轿车用高强度锻铝合金挤压圆棒材 |
High strength extruded forge aluminium alloy round bar materials for passenger cars. |
|
2006-7-26 |
2007-2-1 |
| QC/T 757-2006 |
乘用车列车通用技术条件 |
The general specifications for passenger car - trailer combination |
|
2006-7-26 |
2007-2-1 |
| QC/T 758-2006 |
观光游览车通用技术条件 |
General specification for sightseeing vehicle |
|
2006-7-26 |
2007-2-1 |
| QC/T 759-2006 |
汽车试验用城市运转循环 |
City Driving Cycle For Vehicle Testing |
|
2006-7-26 |
2007-2-1 |
| QC/T 760-2006 |
四轮全地形车通用技术条件 |
General Specifications for four wheeled all-terrain vehicles |
|
2006-7-26 |
2007-2-1 |
| GB 20300-2006 |
道路运输爆炸品和剧毒化学品车辆安全技术条件 |
Safety specifications for road transportation vehicle of explosive substance and chemical toxic substance |
|
2006-7-19 |
2006-11-1 |
| GB/T 20234-2006 |
电动汽车传导充电用插头、插座、车辆耦合器和车辆插孔通用要求 |
Plugs, socket-outlets, vehicle coupers and vehicle inlets for conductive charging of electric vehicles - General requirements |
|
2006-4-30 |
2006-12-1 |
| GB 20182-2006 |
商用车驾驶室外部凸出物 |
The cab of commercial vehicles-External projections |
|
2006-4-3 |
2007-4-1 |
| QC/T 33-2006 |
汽车发动机硅油风扇离合器试验方法 |
Test mehtods of viscous fan clutch for automotive engines |
全部代替：QC/T 33-1992 |
2006-3-7 |
2006-8-1 |
| QC/T 471-2006 |
汽车柴油机技术条件 |
Specifications for auto diesel engines |
全部代替：QC/T 471-1999 |
2006-3-7 |
2006-8-1 |
| QC/T 51-2006 |
扫路车 |
Sweeper truck |
全部代替：QC/T 29111-1993,QC/T 51-1993 |
2006-3-7 |
2006-8-1 |
| QC/T 53-2006 |
吸粪车 |
Suction-type Excrement Tanker |
全部代替：QC/T 29113-1993,QC/T 53-1993 |
2006-3-7 |
2006-8-1 |
| QC/T 54-2006 |
洒水车 |
Street Sprinklers |
全部代替：QC/T 54-1993,QC/T 29114-1993 |
2006-3-7 |
2006-8-1 |
| QC/T 741-2006 |
车用超级电容器 |
Ultracapacitors for Vehicles |
|
2006-3-7 |
2006-8-1 |
| QC/T 742-2006 |
电动汽车用铅酸蓄电池 |
Lead-acid batteries for electric road vehicles |
|
2006-3-7 |
2006-8-1 |
| QC/T 743-2006 |
电动汽车用锂离子蓄电池 |
Lithium-ion batteries for electric road vehicles |
|
2006-3-7 |
2006-8-1 |
| QC/T 744-2006 |
电动汽车用金属氢化物镍蓄电池 |
Nickel-metal hydride batteries for electric road vehicles |
|
2006-3-7 |
2006-8-1 |
| QC/T 745-2006 |
液化石油气汽车橡胶管路 |
Rubber Pipelines For Liquefied Petroleum Gas Vehicles |
|
2006-3-7 |
2006-8-1 |
| QC/T 746-2006 |
压缩天然气汽车高压管路 |
High Pressure Pipelines For Compressed Natural Vehicles |
|
2006-3-7 |
2006-8-1 |
| QC/T 747-2006 |
汽车发动机硅油风扇离合器技术条件 |
Specifications of viscous fan clutch for automotive engines |
|
2006-3-7 |
2006-8-1 |
| QC/T 748-2006 |
汽车发动机气门—气门座强化磨损台架试验方法 |
The bench test methods of valve - valve holder intensify abrasion |
|
2006-3-7 |
2006-8-1 |
| QC/T 749-2006 |
绿化喷洒车 |
Tree Sprinkling Tanker |
|
2006-3-7 |
2006-8-1 |
| QC/T 750-2006 |
清洗车通用技术条件 |
General specifications for cleaning tanker |
|
2006-3-7 |
2006-8-1 |
| QC/T 751-2006 |
摩托车和轻便摩托车催化转化器耐久性试验方法 |
Method of durability test for catalytic converter of motorcycle and moped |
|
2006-3-7 |
2006-8-1 |
| QC/T 752-2006 |
摩托车和轻便摩托车催化转化器通用技术条件 |
General Specifications for Catalytic Converters of Motorcycles and Mopeds |
|
2006-3-7 |
2006-8-1 |
| QC/T 753-2006 |
摩托车和轻便摩托车技术参数表格式 |
Motorcycles and mopeds - the form format of technical parameters |
|
2006-3-7 |
2006-8-1 |
| GB 15084-2006 |
机动车辆后视镜的性能和安装要求 |
Motor vehicles - Rear view mirrors - Requirements of performance and installation |
|
2006-1-18 |
2007-1-1 |
| GB 15086-2006 |
汽车门锁及车门保持件的性能要求和试验方法 |
Motor vehicles - Door locks and door retention components - Performance requirements and test methods |
|
2006-1-18 |
2006-7-1 |
| GB 20071-2006 |
汽车侧面碰撞的乘员保护 |
The protection of the occupants in the event of a lateral collision |
|
2006-1-18 |
2006-7-1 |
| GB 20072-2006 |
乘用车后碰撞燃油系统安全要求 |
The requirements of fuel system safety in the event of rear-end collision for passenger car |
|
2006-1-18 |
2006-7-1 |
| GB 20073-2006 |
摩托车和轻便摩托车 制动性能要求及试验方法 |
Performance and measurement method for braking of motorcycles and mopeds |
全部代替：GB/T 5382.1-1996 部分代替：GB 17355-1998 |
2006-1-18 |
2006-7-1 |
| GB 20074-2006 |
摩托车和轻便摩托车外部凸出物 |
External projections from motorcycles and mopeds |
|
2006-1-18 |
2006-7-1 |
| GB 20075-2006 |
摩托车乘员扶手 |
Passenger hand-holds on motorcycles |
|
2006-1-18 |
2006-7-1 |
| GB 8410-2006 |
汽车内饰材料的燃烧特性 |
Flammability of automotive interior materials |
全部代替：GB 8410-1994 |
2006-1-18 |
2006-7-1 |
| GB/T 13043-2006 |
客车定型试验规程 |
Bus and coach - Engineering approval evaluation process |
全部代替：GB/T 13043-1991,GB/T 13044-1991 |
2006-1-18 |
2006-7-1 |
| GB/T 20076-2006 |
摩托车和轻便摩托车发动机 最大扭矩和最大净功率测量方法 |
Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds |
|
2006-1-18 |
2006-7-1 |
| GB/T 20069-2006 |
道路车辆 牵引座强度试验 |
Road vehicles - Fifth wheel couplings strength tests |
|
2006-1-10 |
2006-6-1 |
| GB/T 20070-2006 |
道路车辆 牵引车与半挂车之间机械连接互换性 |
Road vehicles - Mechanical coupling between tractors and semi-trailers - Interchangeability |
|
2006-1-10 |
2006-6-1 |
| GB/T 4606-2006 |
道路车辆 半挂车牵引座50号牵引销的基本尺寸和安装、互换性尺寸 |
Road vehicles - 50 semi-trailer fifth wheel coupling pin - Basic and mounting/interchangeability dimensions |
全部代替：GB/T 4606-1984 |
2006-1-10 |
2006-6-1 |
| GB/T 4607-2006 |
道路车辆 半挂车牵引座90号牵引销的基本尺寸和安装、互换性尺寸 |
Road vehicles - 90 semi-trailer fifth wheel coupling pin - Basic and mounting/interchangeability dimensions |
全部代替：GB/T 4607-1984 |
2006-1-10 |
2006-6-1 |
| GB/T 4781-2006 |
道路车辆 50毫米牵引杆挂环的互换性 |
Commercial road vehicles - 50mm drawbar eye - Interchangeability |
全部代替：GB/T 4781-1984 |
2006-1-10 |
2006-6-1 |
| QC/T 629-2005 |
汽车遮阳板 |
Automobile sun shield |
全部代替：QC/T 629-1999 |
2005-11-28 |
2006-6-1 |
| QC/T 739-2005 |
油田专用车辆通用技术条件 |
General specification for special vehicles in the oil field |
|
2005-11-28 |
2006-6-1 |
| QC/T 740-2005 |
乘用车座椅总成 |
Seat assembly of passenger car |
|
2005-11-28 |
2006-6-1 |
| GB/T 19949.1-2005 |
道路车辆 安全气囊部件 第1部分:术语 |
Road vehicle Airbag components Part 1:Vocabulary |
|
2005-10-8 |
2006-4-1 |
| GB/T 19949.2-2005 |
道路车辆 安全气囊部件 第2部分:安全气囊模块试验 |
Road vehicle Airbag components Part2:Testing of airbag modules |
|
2005-10-8 |
2006-4-1 |
| GB/T 19949.3-2005 |
道路车辆 安全气囊部件 第3部分:气体发生器总成试验 |
Road vehicle Airbag components Part3:Testing of inflator assemblies |
|
2005-10-8 |
2006-4-1 |
| GB/T 19950-2005 |
双层客车结构安全要求 |
The safety constructional requirements for double deck large passenger vehicles |
|
2005-10-8 |
2006-4-1 |
| GB/T 19951-2005 |
道路车辆-静电放电产生的电骚扰试验方法 |
Roadvehicles-Test methods for electrical disturbances from electrostatic discharge |
|
2005-10-8 |
2006-4-1 |
| GB/T 4095-2005 |
商用汽车辐板式车轮在轮毂上的安装尺寸 |
Disc wheels for Trucks Dimensional character istics of attachment on hub |
全部代替：GB/T 4095-1995 |
2005-10-8 |
2006-4-1 |
| GB/T 5334-2005 |
乘用车车轮性能要求和试验方法 |
Performance requirments and test methods of passenger car wheels |
全部代替：GB/T 5334-1995 |
2005-10-8 |
2006-4-1 |
| GB/T 3487-2005 |
汽车轮辋规格系列 |
Rim contour for motor vehicles |
全部代替：GB/T 3487-1996 |
2005-9-15 |
2006-5-1 |
| GB/T 9769-2005 |
轮辋轮廓检测 |
Rim contour measure |
全部代替：GB/T 9769-1988 |
2005-9-15 |
2006-5-1 |
| QC/T 645-2005 |
清障车 |
Tow truck |
全部代替：QC/T 645-2000 |
2005-7-26 |
2006-1-1 |
| QC/T 654-2005 |
摩托车和轻便摩托车制动器台架试验方法 |
Tests methods of braking devices for motorcycles and moped |
全部代替：QC/T 654-2000 |
2005-7-26 |
2006-1-1 |
| QC/T 655-2005 |
摩托车和轻便摩托车制动器技术条件 |
Technique term of brakes for motorcycles and moped |
全部代替：QC/T 655-2000 |
2005-7-26 |
2006-1-1 |
| QC/T 733-2005 |
沙漠车辆 |
Vehicle Off-road For Desert |
|
2005-7-26 |
2006-1-1 |
| QC/T 734-2005 |
摩托车和轻便摩托车发动机密封性能技术要求与试验方法 |
Technological requirements and experimental method on sealing Performance for engines of motorcycles and mopeds |
|
2005-7-26 |
2006-1-1 |
| QC/T 735-2005 |
摩托车和轻便摩托车方向把角度 宽度尺寸 |
Dimensions of angle and width of direction handle for motorcycles and mopeds |
|
2005-7-26 |
2006-1-1 |
| QC/T 736-2005 |
轿车发动机钢带组合油环技术条件 |
Technical requirements for steel-strip combination oil ring of passenger car engine |
|
2005-7-26 |
2006-1-1 |
| QC/T 737-2005 |
轿车发动机铸铁活塞环技术条件 |
Technical requirements for cast-iron piston ring of passenger car engine |
|
2005-7-26 |
2006-1-1 |
| QC/T 738-2005 |
轻便摩托车用电喇叭技术条件 |
Technical specification of electronic horn for motorcycles and mopeds |
|
2005-7-26 |
2006-1-1 |
| GB/T 18385-2005 |
电动汽车 动力性能 试验方法 |
Electric vehicles Power performance Test method |
全部代替：GB/T 18385-2001 |
2005-7-13 |
2006-2-1 |
| GB/T 18386-2005 |
电动汽车 能量消耗率和续驶里程 试验方法 |
Electric vehicles Energy consumption and range Test procedures |
全部代替：GB/T 18386-2001 |
2005-7-13 |
2006-2-1 |
| GB/T 19836-2005 |
电动汽车用仪表 |
Instrumentation for electric vehicles |
|
2005-7-13 |
2006-2-1 |
| GB/T 4094.2-2005 |
电动汽车操纵件、批示器及信号装置的标志 |
Electric vehicles-Symbols for control,indicators,and telltales |
|
2005-7-13 |
2006-2-1 |
| GB/T 12428-2005 |
客车装载质量计算方法 |
Laden mass calculating method for buses |
全部代替：GB/T 12428-1990 |
2005-5-23 |
2005-10-1 |
| GB/T 18388-2005 |
电动汽车 定型试验规程 |
Electric vehicles-Engineering approval evaluation program |
全部代替：GB/T 18388-2001 |
2005-5-23 |
2005-10-1 |
| GB/T 19750-2005 |
混合动力电动汽车 定型试验规程 |
Hybrid electric vehicles-Engineering approval evaluation program |
|
2005-5-23 |
2005-10-1 |
| GB/T 19751-2005 |
混合动力电动汽车安全要求 |
Hybrid electric vehicles safety specification |
|
2005-5-23 |
2005-10-1 |
| GB/T 19752-2005 |
混合动力电动汽车 动力性能 试验方法 |
Hybrid electric vehicles-Power performance-Test method |
|
2005-5-23 |
2005-10-1 |
| GB/T 19753-2005 |
轻型混合动力电动汽车 能量消耗量 试验方法 |
Test Methods for Energy Consumption of Light-duty Hybrid Electric Vehicles |
|
2005-5-23 |
2005-10-1 |
| GB/T 19754-2005 |
重型混合动力电动汽车 能量消耗量 试验方法 |
Test Methods for Energy Consumption of Heavy-duty Hybrid Electric Vehicles |
|
2005-5-23 |
2005-10-1 |
| GB/T 19755-2005 |
轻型混合动力电动汽车 污染物排放测量方法 |
Measurement Methods for Emissions from Light-duty Hybrid Electric Vehicles |
|
2005-5-23 |
2005-10-1 |
| GB 18352.3-2005 |
轻型汽车污染物排放限值及测量方法（中国III、IV阶段） |
Limits and measurement methods for emissions from light-duty vehicles |
|
2005-4-15 |
2005-7-1 |
| GB/T 18364.2-2005 |
汽车用液化石油气加气口 第2部分:快插式 |
Filling receptacle of LPG vehicle-Part 2:Insert |
|
2005-3-21 |
2005-8-1 |
| QC/T 430-2005 |
火花塞 产品型号编制方法 |
Editorial nominationg method for the type designation of spark-plugs |
全部代替：QC/T 430-1999 |
2005-2-14 |
2005-7-1 |
| QC/T 481-2005 |
汽车发动机曲轴技术条件 |
Specifications of crankshaft for vehicle engine |
全部代替：QC/T 481-1999 |
2005-2-14 |
2005-7-1 |
| QC/T 641-2005 |
汽车用塑料密封条 |
Plastic weatherstrips for Automobile |
全部代替：QC/T 641-2000 |
2005-2-14 |
2005-7-1 |
| QC/T 728-2005 |
汽车整车大气暴露试验方法 |
Road vehicle-Test method of exposure to weathering |
|
2005-2-14 |
2005-7-1 |
| QC/T 729-2005 |
汽车用交流发电机技术条件 |
Automotive alternator technical specification |
全部代替：QC/T 29094-1992 |
2005-2-14 |
2005-7-1 |
| QC/T 730-2005 |
汽车用薄壁绝缘低压电线 |
Road vehicle-low tension cables with thin wall insulated |
|
2005-2-14 |
2005-7-1 |
| QC/T 731-2005 |
汽车用起动机技术条件 |
Automotive starting motor specification |
|
2005-2-14 |
2005-7-1 |
| QC/T 732-2005 |
乘用车强化腐蚀试验方法 |
Accelerated corrosion testing method for passenger car |
|
2005-2-14 |
2005-7-1 |
| GB/T 19596-2004 |
电动汽车术语 |
Terminology of electric vehicles |
|
2004-11-2 |
2005-6-1 |
| GB 19578-2004 |
乘用车燃料消耗量限值 |
Limits of fuel consumption for passenger cars |
|
2004-9-2 |
2005-7-1 |
| GB/T 6420-2004 |
货运挂车系列型谱 |
Freight trailer series pedigree |
全部代替：GB/T 6420-1986 |
2004-6-29 |
2004-10-1 |
| GB 16735-2004 |
道路车辆 车辆识别代号(VIN) |
Road vehicle--Vehicle identification number(VIN) |
全部代替：GB/T 16735-1997,GB/T 16736-1997 |
2004-6-21 |
2004-10-1 |
| GB/T 19514-2004 |
乘用车 行李舱 标准容积的测量方法 |
Passenger cars--Luggage compartments--Method of measuring reference volume |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB/T 19515-2004 |
道路车辆 可再利用性和可回收利用性计算方法 |
Road vehicles--Recyclability and recoverability--Calculation method |
|
2004-5-17 |
2004-11-1 |
| GB 1589-2004 |
道路车辆外廓尺寸、轴荷及质量限值 |
Limits of dimensions，axle load and masses for road vehicles |
全部代替：GB 1589-1989 |
2004-4-1 |
2004-10-1 |
| GB 19482-2004 |
摩托车和轻便摩托车燃油箱安全性能要求和试验方法 |
Safety property requirements and test method for fuel tanks of motorcycles and mopeds |
|
2004-3-18 |
2004-10-1 |
| GB 16737-2004 |
道路车辆 世界制造厂识别代号(WMI) |
Road vehicle--World manufacturer identifier(WMI)code |
全部代替：GB/T 16737-1997 |
2004-3-15 |
2004-9-1 |
| QC/T 265-2004 |
汽车零部件编号规则 |
Coding Rules of Automobile Part And Component |
全部代替：QC/T 265-1999 |
2004-3-12 |
2004-8-1 |
| QC/T 420-2004 |
汽车用熔断器 |
|
全部代替：QC/T 420-1999 |
2004-3-12 |
2004-8-1 |
| QC/T 708-2004 |
汽车空调风机技术条件 |
|
|
2004-3-12 |
2004-8-1 |
| GB/T 19463-2004 |
乘用车用刮水器刮片长度尺寸系列及连接尺寸 |
Blade length series and its connection dimensions of wiper for passenger cars |
|
2004-3-10 |
2004-9-1 |
| QC/T 25-2004 |
汽车干磨擦式离合器总成技术条件 |
Technical Specification of Automobile Clutch |
全部代替：QC/T 25-1992 |
2004-2-10 |
2004-8-1 |
| QC/T 27-2004 |
汽车干磨擦式离合器总成台架试验方法 |
Bench Test Method of Automobile Clutch |
全部代替：QC/T 27-1992 |
2004-2-10 |
2004-8-1 |
| QC/T 29106-2004 |
汽车低压电线束技术条件 |
Technical requirement for automotive low voltage wire harnesses |
全部代替：QC/T 29106-1992 |
2004-2-10 |
2004-8-1 |
| QC/T 30-2004 |
机动车用电喇叭技术条件 |
|
全部代替：QC/T 30-1992 |
2004-2-10 |
2004-8-1 |
| QC/T 459-2004 |
随车起重运输车 |
|
全部代替：QC/T 459-1999 |
2004-2-10 |
2004-8-1 |
| QC/T 698.1-2004 |
车辆说明文件 第一部分：车辆注册技术参数表 |
Vehicle Instructions - Part 1:Vehicle Registration Technology Parameter Table |
|
2004-2-10 |
2004-8-1 |
| QC/T 699-2004 |
车用起重尾板 |
Tail-lift for vehicle |
|
2004-2-10 |
2004-8-1 |
| QC/T 700-2004 |
摩托车和轻便摩托车气缸头通用技术条件 |
General technical specification of cylinder head for motorcycles and mopeds |
|
2004-2-10 |
2004-8-1 |
| QC/T 701-2004 |
摩托车和轻便摩托车后减震器安装接头尺寸 |
Mounting of rear shock absorbers for motorcycles and mopeds |
|
2004-2-10 |
2004-8-1 |
| QC/T 702-2004 |
摩托车和轻便摩托车用催化转化器可靠性试验方法 |
Method of reliability test for catalytic converter of motorcycle and moped |
|
2004-2-10 |
2004-8-1 |
| QC/T 703-2004 |
汽车转向盘聚氨酯泡沫包覆层技术条件 |
Specification of PU foam wrap layer for auto steering-wheel |
|
2004-2-10 |
2004-8-1 |
| QC/T 704-2004 |
汽车转向盘聚氨酯泡沫包覆层整体硬度试验方法 |
Test method of PU foam warp layer integer hardness for auto steering-wheel |
|
2004-2-10 |
2004-8-1 |
| QC/T 705-2004 |
客车电子报站器 |
Electronic bus-stop annunciator onboard motorcoach |
|
2004-2-10 |
2004-8-1 |
| QC/T 706-2004 |
机动车用硅雪崩整流二极管技术条件 |
|
|
2004-2-10 |
2004-8-1 |
| QC/T 707-2004 |
车用中央电气接线盒技术条件 |
Techniacal requirement of center box for vehicles |
|
2004-2-10 |
2004-8-1 |
| GB 11551-2003 |
乘用车正面碰撞的乘员保护 |
The protection of the occupants in the event of a frontal collision for passenger car |
|
2003-11-27 |
2004-6-1 |
| GB/T 19260-2003 |
低地板及低入口城市客车结构要求 |
Structure requirements of low floor city-bus and low entry city-bus |
|
2003-8-4 |
2004-3-1 |
| GB/T 19233-2003 |
轻型汽车燃料消耗量试验方法 |
Measurement methods of fuel consumption for light-duty vehicles |
全部代替：GB/T 12545.1-2001 |
2003-7-1 |
2003-12-1 |
| GB/T 12538-2003 |
两轴道路车辆 重心位置的测定 |
Road vehicles with two axles--Determination of centre of gravity |
部分代替：GB/T 12538-1990 |
2003-7-1 |
2003-12-1 |
| GB/T 13594-2003 |
机动车和挂车防抱制动性能和试验方法 |
Antilock braking performance and test procedure for motor vehicles and their trailers |
全部代替：GB 13594-1992 |
2003-7-1 |
2003-12-1 |
| GB/T 19234-2003 |
乘用车尺寸代码 |
Dimensional codes for passenger cars |
|
2003-7-1 |
2003-12-1 |
| GB/T 19235-2003 |
液化石油气加气机加气枪 |
Fueling nozzle for LPG dispenser |
|
2003-7-1 |
2003-12-1 |
| GB/T 19236-2003 |
压缩天然气加气机加气枪 |
Fueling nozzle for CNG dispenser |
|
2003-7-1 |
2003-12-1 |
| GB/T 19237-2003 |
汽车用压缩天然气加气机 |
Compressed natural gas dispenser for vehicle |
|
2003-7-1 |
2003-12-1 |
| GB/T 19238-2003 |
汽车用液化石油气加气机 |
Liquefied petroleum gas dispenser for vehicle |
|
2003-7-1 |
2003-12-1 |
| GB/T 19239-2003 |
液化石油气汽车专用装置的安装要求 |
Mounting requirements of special equipment for liquefied petroleum gas vehicles |
|
2003-7-1 |
2003-12-1 |
| GB/T 19240-2003 |
压缩天然气汽车专用装置的安装要求 |
Mounting requirements of special equipment for compressed natural gas vehicles |
|
2003-7-1 |
2003-12-1 |
| GB 14166-2003 |
机动车成年乘员用安全带和约束系统 |
Safety belts and restraint systems for adult occupants of motor vehicles |
|
2003-5-23 |
2003-11-1 |
| GB 19151-2003 |
机动车用三角警告牌 |
Warning triangles for motor vehicle |
|
2003-5-23 |
2003-11-1 |
| GB 19152-2003 |
轻便摩托车前照灯配光性能 |
Photometric characteristics of moped headlamps |
|
2003-5-23 |
2003-11-1 |
| GB 9656-2003 |
汽车安全玻璃 |
Safety glazing materials for road vehicles |
全部代替：GB 9656-1996 |
2003-4-23 |
2004-4-1 |
| GB/T 19055-2003 |
汽车发动机可靠性试验方法 |
Reliability test methods for motor vehicle engines |
|
2003-4-15 |
2003-9-1 |
| GB 13057-2003 |
客车座椅及其车辆固定件的强度 |
The strength of the seats and their anchorages of passenger vehicles |
|
2003-3-13 |
2003-9-1 |
| QC/T 245-2002 |
压缩天然气汽车专用装置技术条件 |
Technical requirements of special equipment for compressed natural vehicles |
全部代替：QC/T 245-1998 |
2003-3-10 |
2003-8-1 |
| QC/T 247-2002 |
液化石油气汽车专用装置技术条件 |
Technical requirements of special equipment for liquefied petroleum gas vehicles |
全部代替：QC/T 247-1998 |
2003-3-10 |
2003-8-1 |
| QC/T 695-2002 |
汽车通用继电器 |
General relay for motor vehicle |
|
2003-3-10 |
2003-8-1 |
| GB 18986-2003 |
轻型客车结构安全要求 |
The safety requirements for light bus construction |
|
2003-3-6 |
2003-9-1 |
| GB/T 18305-2003 |
质量管理体系 汽车生产件及相关服务件组织应用GB/T 19001-2000的特别要求 |
Quality management systems--Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations |
全部代替：GB/T 18305-2001 |
2003-1-17 |
2003-6-1 |
| GB/T 18954-2003 |
摩托车和轻便摩托车底盘测功机的设定 惯性滑行法 |
Chassis dynamometer setting for motorcycles and mopeds--Coastdown method |
|
2003-1-17 |
2003-6-1 |
| QC/T 413-2002 |
汽车电气设备基本技术条件 |
Basic specifications for motor vehicles electrical equipment |
全部代替：QC/T 413-1999 |
2002-12-31 |
2003-3-1 |
| QC/T 453-2002 |
厢式运输车 |
Transport van |
全部代替：QC/T 453-1999 |
2002-12-31 |
2003-3-1 |
| QC/T 457-2002 |
救护车 |
Ambulance |
全部代替：QC/T 457-1999 |
2002-12-31 |
2003-3-1 |
| QC/T 469-2002 |
汽车发动机气门技术条件 |
Technical requirements for Automotive engine valves |
全部代替：QC/T 469-1999 |
2002-12-31 |
2003-3-1 |
| QC/T 679-2002 |
车辆运输车 |
Car transporter |
|
2002-12-31 |
2003-3-1 |
| QC/T 680-2002 |
摩托车和轻便摩托车用电压调节器技术条件 |
Technical specifications of voltage regulator for motorcycles and mopeds |
全部代替：JB/T 6022.1-1992,JB/T 6022.2-1992 |
2002-12-31 |
2003-3-1 |
| QC/T 681-2002 |
摩托车和轻便摩托车用起动继电器技术条件 |
Technical specifications of starting relay for motorcycles and mopeds |
|
2002-12-31 |
2003-3-1 |
| QC/T 682-2002 |
摩托车和轻便摩托车座垫技术条件 |
Technical condition of motorcycles and mopeds |
|
2002-12-31 |
2003-3-1 |
| QC/T 683-2002 |
摩托车和轻便摩托车发动机清洁度限值及测量方法 |
Gasoline engine for motorcycle and moped Limitation and determination of cleanliness |
全部代替：GB/T 5361-1985 |
2002-12-31 |
2003-3-1 |
| QC/T 684-2002 |
摩托车和轻便摩托车发动机用石棉橡胶垫片技术条件 |
Specifications of asbestos-rubber gaskets of gasoline for motorcycles and mopeds |
|
2002-12-31 |
2003-3-1 |
| QC/T 685-2002 |
摩托车和轻便摩托车柱塞式机油泵通用技术条件 |
General specifications of plunger type oil pump for motorcycle and moped |
|
2002-12-31 |
2003-3-1 |
| QC/T 686-2002 |
摩托车和轻便摩托车发动机组合式曲轴连杆总成技术条件 |
Specifications for combined type crankshaft and connecting rod assembly for motorcycle and moped engine |
|
2002-12-31 |
2003-3-1 |
| QC/T 687-2002 |
摩托车和轻便摩托车发动机气缸体技术条件 |
Specifications of cylinder block for motorcycle and moped engine |
|
2002-12-31 |
2003-3-1 |
| GB/T 5137.1-2002 |
汽车安全玻璃试验方法 第1部分:力学性能试验 |
Road vehicles--Safety glazing materials--Part 1:Test methods for mechanical properties |
全部代替：GB/T 5137.1-1996 |
2002-12-20 |
2003-5-1 |
| GB/T 5137.2-2002 |
汽车安全玻璃试验方法 第2部分:光学性能试验 |
Road vehicles--Safety glazing materials--Part 2:Test methods for optical properties |
全部代替：GB/T 5137.2-1996 |
2002-12-20 |
2003-5-1 |
| GB/T 5137.3-2002 |
汽车安全玻璃试验方法 第3部分:耐辐照高温潮湿燃烧和耐模拟气候试验 |
Road vehicles--Safety glazing materials--Part 3:Test methods for resistance to radiation，high temperature，humidity，fire and simulated weathering |
全部代替：GB/T 5137.3-1996 |
2002-12-20 |
2003-5-1 |
| GB/T 13872-2002 |
货运挂车产品质量检查 试验规程 |
Test-rules of products quality inspection for trailers |
全部代替：GB/T 13872-1992 |
2002-8-29 |
2003-1-1 |
| GB/T 5620-2002 |
道路车辆 汽车和挂车 制动名词术语及其定义 |
Road vehicles--Braking of automotive vehicles and their trailers--Vocabulary |
全部代替：GB/T 5620.1-1985,GB/T 5620.2-1985 |
2002-8-29 |
2003-1-1 |
| QC/T 288.1-2001 |
汽车发动机冷却水泵技术条件 |
Specification of water pump for automobile emgine |
全部代替：QC/T 288-1999 |
2001-12-30 |
2002-5-1 |
| QC/T 288.2-2001 |
汽车发动机冷却水泵试验方法 |
Test method of water pump for automobile emgine |
|
2001-12-30 |
2002-5-1 |
| QC/T 289-2001 |
汽车发动机机油泵技术条件 |
Specification of lubricating pumps for automobile emgines |
全部代替：QC/T 289-1999 |
2001-12-30 |
2002-5-1 |
| QC/T 678-2001 |
客车乘客门门泵 |
|
全部代替：GB/T12432-1990,GB/T12433-1990 |
2001-12-30 |
2002-5-1 |
| GB/T 18487.1-2001 |
电动车辆传导充电系统 一般要求 |
Electric vehicle conductive charging system--Part 1:General requirements |
|
2001-11-12 |
2002-5-1 |
| GB/T 18487.2-2001 |
电动车辆传导充电系统 电动车辆与交流/直流电源的连接要求 |
Electric vehicle conductive charging system--Electric vehicles requirements for conductiveconnection to an A.C./D.C.supply |
|
2001-11-12 |
2002-5-1 |
| GB/T 18487.3-2001 |
电动车辆传导充电系统 电动车辆交流/直流充电机(站) |
Electric vehicle conductive charging system--A.C./D.C.electric vehicle charging station |
|
2001-11-12 |
2002-5-1 |
| GB 11567.1-2001 |
汽车和挂车侧面防护要求 |
Motor vehicles and trailers--Lateral protectionrequirements |
全部代替：GB 11567-1994部分 |
2001-8-22 |
2002-5-1 |
| GB 11567.2-2001 |
汽车和挂车后下部防护要求 |
Motor vehicles and trailers--Rear underrun protection requirements |
全部代替：GB 11567-1994部分 |
2001-8-22 |
2002-5-1 |
| GB 18408-2001 |
汽车及挂车后牌照板照明装置配光性能 |
Photometric characteristics of devices for the illumination of rear registration plates of motor vehicles and theirtrailers |
|
2001-8-22 |
2002-5-1 |
| GB 18409-2001 |
汽车驻车灯配光性能 |
Photometric characteristics of parking lamps for power-driven vehicles |
|
2001-8-22 |
2002-5-1 |
| GB/T 18410-2001 |
车辆识别代号条码标签 |
Vehicle identification number bar-code label |
|
2001-8-22 |
2002-5-1 |
| GB/T 18411-2001 |
道路车辆 产品标牌 |
Road vehicle--Manufacturer’s plate |
|
2001-8-22 |
2002-5-1 |
| QC/T 417.1-2001 |
车用电线束插接器 第1部分 定义,试验方法和一般性能要求(汽车部分) |
|
全部代替：QC/T 417-1999,QC/T 418-1999,QCn29012-1991 |
2001-8-21 |
2001-12-1 |
| QC/T 417.2-2001 |
车用电线束插接器 第2部分 试验方法和一般性能要求(摩托车部分) |
Electrical harness connectors for vehicle use - Part 2 Test methods and general performance requirements (motorcycle part) |
全部代替：QC/T 417-1999,QC/T 418-1999,QCn29012-1991 |
2001-8-21 |
2001-12-1 |
| QC/T 417.3-2001 |
车用电线束插接器 第3部分 单线片式插接件的尺寸和特殊要求 |
|
全部代替：QC/T 417-1999,QC/T 418-1999,QCn29012-1991 |
2001-8-21 |
2001-12-1 |
| QC/T 417.4-2001 |
车用电线束插接器 第4部分 多线片式插接件的尺寸和特殊要求 |
|
全部代替：QC/T 417-1999,QC/T 418-1999,QCn29012-1991 |
2001-8-21 |
2001-12-1 |
| QC/T 417.5-2001 |
车用电线束插接器 第5部分 用于单线和多线插接器的圆柱式插接件的尺寸和特殊要求 |
|
全部代替：QC/T 417-1999,QC/T 418-1999,QCn29012-1991 |
2001-8-21 |
2001-12-1 |
| QC/T 531-2001 |
汽车后视镜 |
|
全部代替：QC/T 531-1999,QC/T 532-1999 |
2001-8-21 |
2001-12-1 |
| QC/T 676-2001 |
汽车车身辊压型材、涂覆辊压型材技术条件 |
|
|
2001-8-21 |
2001-12-1 |
| QC/T 677-2001 |
卧铺客车平顺性随机输入行驶试验方法 |
|
|
2001-8-21 |
2001-12-1 |
| GB/T 18384.1-2001 |
电动汽车 安全要求 第1部分:车载储能装置 |
Electric vehicles--Safety specification--Part 1:On-board energy storage |
|
2001-7-12 |
2001-12-1 |
| GB/T 18384.2-2001 |
电动汽车 安全要求 第2部分:功能安全和故障防护 |
Electric vehicles--Safety specification--Part 2:Funct-ional safety means and protection against failures |
|
2001-7-12 |
2001-12-1 |
| GB/T 18384.3-2001 |
电动汽车 安全要求 第3部分:人员触电防护 |
Electric vehicles--Safety specification--Part 3:Protection of persons against electric hazards |
|
2001-7-12 |
2001-12-1 |
| GB/T 12545.2-2001 |
商用车辆燃料消耗量试验方法 |
Commercial vehicle--Fuel consumption test method |
全部代替：GB/T 12545-1990 |
2001-7-3 |
2002-3-1 |
| GB/T 15089-2001 |
机动车辆及挂车分类 |
Classification of power-driven vehicles and trailers |
全部代替：GB/T 15089-1994 |
2001-7-3 |
2002-3-1 |
| GB/T 18377-2001 |
汽油车用催化转化器的技术要求和试验方法 |
Requirements and measurement methods of catalytic converters for petrol vehicles |
|
2001-7-3 |
2002-3-1 |
| GB/T 3730.1-2001 |
汽车和挂车类型的术语和定义 |
Motor vehicles and trailers--Types--Terms and definitions |
全部代替：GB/T 3730.1-1988 |
2001-7-3 |
2002-3-1 |
| GB/T 4782-2001 |
道路车辆 操纵件、指示器及信号装置 词汇 |
Road vehicles--Controls，indicators and tell-tales--Vocabulary |
全部代替：GB/T 4782-1984 |
2001-7-3 |
2002-3-1 |
| GB/T 5181-2001 |
汽车排放术语和定义 |
Automotive emission--Terms and definitions |
全部代替：GB/T 5181-1985 |
2001-7-3 |
2002-3-1 |
| GB/T 18363-2001 |
汽车用压缩天然气加气口 |
Filling receptacle of CNG vehicle |
|
2001-5-11 |
2002-1-1 |
| GB/T 18364.1-2001 |
汽车用液化石油气加气口(螺旋式) |
Filling receptacle of LPG vehicle(Spird) |
|
2001-5-11 |
2002-1-1 |
| GB/T 5137.4-2001 |
汽车安全玻璃太阳能透射比测定方法 |
Road vehicles--Safety glazing materials--Method for the determination of solar transmittance |
|
2001-4-29 |
2001-10-1 |
| GB 18352.1-2001 |
轻型汽车污染物排放限值及测量方法(I) |
Limits and measurement methods foremissions of pollutants from light-duty vehicles(Ⅰ) |
|
2001-4-16 |
2001-4-16 |
| GB 18352.2-2001 |
轻型汽车污染物排放限值及测量方法(Ⅱ) |
Limits and measurement methods for emissions of pollutants from light-duty vehicles(Ⅱ) |
全部代替：GB 14761-2001 |
2001-4-16 |
2004-7-1 |
| GB/T 18332.2-2001 |
电动道路车辆用金属氢化物镍蓄电池 |
Nickel-metal hydride batteries of electric road vehicles |
|
2001-3-7 |
2001-9-1 |
| GB/Z 18333.2-2001 |
电动道路车辆用锌空气蓄电池 |
Zinc-air batteries for electric road vehicles |
|
2001-3-7 |
2001-9-1 |
| GB 15742-2001 |
机动车用喇叭的性能要求及试验方法 |
Performance requirements and test methods of horn for motor vehicles |
全部代替：GB 15742-1995 |
2001-1-10 |
2001-10-1 |
| GB 18296-2001 |
汽车燃油箱 安全性能要求和试验方法 |
Safety property requirements and test methods for automobile fuel tank |
|
2001-1-10 |
2001-10-1 |
| GB/T 18297-2001 |
汽车发动机性能试验方法 |
Performance test code for road vehicle engines |
|
2001-1-10 |
2001-10-1 |
| GB/T 4780-2000 |
汽车车身术语 |
Terms for motor vehicle body |
全部代替：GB/T 12484-1990,GB/T 4780-1984 |
2000-6-10 |
2001-1-1 |
| GB 18099-2000 |
汽车及挂车侧标志灯配光性能 |
Photometric characteristics of side-markerlamps for motor vehicles and their trailers |
|
2000-5-11 |
2001-1-1 |
| QC/T 326-1999 |
汽车标准件产品编号规则 |
|
全部代替：ZB T30 001-1987 |
1999-11-5 |
1900-7-1 |
| QC/T 340-1999 |
六角法兰承面带齿螺栓 |
|
全部代替：ZB T31 017-1987 |
1999-11-5 |
1900-7-1 |
| QC/T 346-1999 |
塑料堵塞 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 354-1999 |
汽车车轮螺母 法兰球面螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 355-1999 |
汽车车轮螺母 锥面螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 356-1999 |
汽车车轮螺母 球面螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 357-1999 |
汽车车轮螺母 内螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 597-1999 |
螺纹紧固件预涂微胶囊厌氧干膜胶 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 598-1999 |
承面凸焊螺栓 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 599-1999 |
端面凸焊螺栓 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 600-1999 |
六角头螺栓和锥形弹性垫圈的组合件 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 601-1999 |
锥形弹性垫圈 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 602-1999 |
十字槽大半圆头自攻螺钉 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 603-1999 |
A型卡扣 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 604-1999 |
B型卡扣 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 605-1999 |
C型卡扣 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 606-1999 |
H型卡扣 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 607-1999 |
六角螺母和锥形弹性垫圈组合件 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 608-1999 |
B型板簧螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 609-1999 |
板式焊接螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 610-1999 |
C型板簧螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 611-1999 |
冲压螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 612-1999 |
汽车车轮螺母 带垫平连接螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 613-1999 |
六角法兰自排屑螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 614-1999 |
A型通孔式嵌装塑料螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 615-1999 |
B型通孔式嵌装塑料螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 616-1999 |
C型通孔式嵌装塑料螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 617-1999 |
端封式嵌装塑料螺母 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 618-1999 |
嵌装塑料螺母 技术条件 |
|
全部代替：ZB T31 032.3-1988 |
1999-11-5 |
1900-7-1 |
| QC/T 619-1999 |
B型和C型蜗杆传动式软管环箍 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 620-1999 |
A型蜗杆传动式软管环箍 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 621-1999 |
钢丝钢带弹性环箍 |
|
全部代替：ZB T32 004-1988,ZB T32 009-1988 |
1999-11-5 |
1900-7-1 |
| QC/T 622-1999 |
螺旋弹性销 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 623-1999 |
锁销 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 624-1999 |
橡胶堵塞 |
|
|
1999-11-5 |
1900-7-1 |
| QC/T 625-1999 |
汽车用涂镀层和化学处理层 |
|
全部代替：JB 2864-1981,ZB T04 004-1988 |
1999-11-5 |
1900-7-1 |
| QC/T 627-1999 |
汽车电动门锁装置 |
Motor vehicles ＿ Gentral lock devices |
|
1999-11-5 |
1900-7-1 |
| QC/T 628-1999 |
汽车用带点火开关的转向锁 |
Motor Vehicles ＿ Steering Locks with Ignition Switches |
全部代替：QC/T 29028-1991,QC/T 29029-1991 |
1999-11-5 |
1900-7-1 |
| GB/T 17895-1999 |
天然气汽车和液化石油气汽车 词汇 |
Natural gas vehicle and liquefied petroleum gas vehicle--Vocabulary |
|
1999-11-1 |
2000-8-1 |
| GB/T 6784-1999 |
M10×1平座火花塞及其气缸盖安装孔 |
M10×1 spark-plugs with flat seatingand their cylinder head housing |
|
1999-11-1 |
2000-8-1 |
| GB/T 6785-1999 |
M12×1.25平座火花塞及其气缸盖安装孔 |
M12×1.25 spark-plugs with flat seating and their cylinder head housing |
|
1999-11-1 |
2000-8-1 |
| GB/T 6789-1999 |
M14×1.25锥座火花塞及其气缸盖安装孔 |
M14×1.25 spark-plugs with conical seating and their cylinder head housing |
|
1999-11-1 |
2000-8-1 |
| GB 4094-1999 |
汽车操纵件、指示器及信号装置的标志 |
Motor vehicles--Symbols for controls，indicators and tell-tales |
全部代替：GB 4094-1994 |
1999-9-17 |
2000-7-1 |
| GB/T 17867-1999 |
轿车手操纵件、指示器及信号装置的位置 |
Passenger cars--Location of hand controls，indicators and tell-tales |
|
1999-9-17 |
2000-7-1 |
| QC/T 307-1999 |
真空助力器技术条件 |
|
全部代替：ZB/T24 003-1987,ZB/T24 004-1987 |
1999-8-9 |
1900-1-3 |
| QC/T 316-1999 |
汽车行车制动器疲劳强度台架试验方法 |
|
全部代替：ZB/T T24 013-1990 |
1999-8-9 |
1900-1-3 |
| QC/T 584-1999 |
汽车底盘产品质量检验评定办法 |
|
全部代替：QCn29008.5-1991 |
1999-8-9 |
1900-1-3 |
| QC/T 587-1999 |
罐式汽车产品质量检验评定方法 |
|
|
1999-8-9 |
1900-1-3 |
| QC/T 588-1999 |
自卸汽车产品质量检验评定方法 |
|
|
1999-8-9 |
1900-1-3 |
| QC/T 589-1999 |
厢式汽车产品质量检验评定方法 |
|
|
1999-8-9 |
1900-1-3 |
| QC/T 590-1999 |
汽车柴油机涡轮增压器技术条件 |
|
|
1999-8-9 |
1900-1-3 |
| QC/T 591-1999 |
汽车柴油机涡轮增压器试验方法 |
|
|
1999-8-9 |
1900-1-3 |
| QC/T 592-1999 |
轿车制动钳总成性能要求及台架试验方法 |
|
|
1999-8-9 |
1900-1-3 |
| QC/T 593-1999 |
液压感载比例阀技术条件 |
|
|
1999-8-9 |
1900-1-3 |
| QC/T 567-1999 |
轿车行李箱测量参考体积的方法 |
|
|
1999-3-15 |
1999-3-15 |
| GB/T 17692-1999 |
汽车用发动机净功率测试方法 |
Measurement methods of net power for automotive engines |
|
1999-3-10 |
2000-1-1 |
| GB 17675-1999 |
汽车转向系 基本要求 |
Steering system of motor vehicles--Basic requirements |
|
1999-2-14 |
2000-1-1 |
| GB/T 17676-1999 |
天然气汽车和液化石油气汽车 标志 |
Natural gas vehicle and liquefied petroleumgas vehicle--Identification marks |
|
1999-2-14 |
2000-1-1 |
| GB 12676-1999 |
汽车制动系统 结构、性能和试验方法 |
Road vehicles--Braking systems--Structure，performance and test methods |
|
1999-1-8 |
1999-10-1 |
| QC/T 256-1998 |
液化石油气汽车定型试验规程 |
|
|
1998-12-16 |
1999-7-1 |
| GB/T 17578-1998 |
客车上部结构强度的规定 |
Provisions of strength for the superstructure of bus |
|
1998-11-18 |
1999-9-1 |
| GB 5948-1998 |
摩托车白炽丝光源前照灯配光性能 |
Photometric characteristics of motocycle headlamps epuipped with filament light sources |
全部代替：GB 5948-1986 |
1998-10-19 |
1999-10-1 |
| QC/T 252-1998 |
专用汽车定型试验规程 |
|
|
1998-7-13 |
1999-1-1 |
| QC/T 253-1998 |
摩托车和轻便摩托车发动机型号编制方法 |
|
|
1998-7-13 |
1999-1-1 |
| QC/T 251-1998 |
矿用自卸汽车应急转向性能要求 |
|
|
1998-5-28 |
1998-7-1 |
| GB 17353-1998 |
摩托车和轻便摩托车转向锁止防盗装置 |
Protective devices against unauthorized use-steering-locking for motorcycles and mopeds |
|
1998-5-6 |
1999-1-1 |
| GB 17354-1998 |
汽车前、后端保护装置 |
Front and rear protective devices for passenger cars |
|
1998-5-6 |
1999-1-1 |
| GB/T 17346-1998 |
轿车 脚踏板的侧向间距 |
Passenger cars--Lateral spacing of foot controls |
|
1998-5-6 |
1999-1-1 |
| GB/T 17347-1998 |
商用道路车辆 尺寸代码 |
Commercial road vehicles--Dimensional codes |
|
1998-5-6 |
1999-1-1 |
| GB/T 17349.1-1998 |
道路车辆 汽车诊断系统 词汇 |
Road vehicles--Diagnostic systems for motor vehicles--Vocabulary |
|
1998-5-6 |
1999-1-1 |
| GB/T 17349.2-1998 |
道路车辆 汽车诊断系统 图形符号 |
Rord vehicle--Diagnostic system--Graphical symbols |
|
1998-5-6 |
1999-1-1 |
| GB/T 17351-1998 |
汽车车轮 双轮中心距 |
Dual spacing of vechicle wheels |
|
1998-5-6 |
1999-1-1 |
| GB/T 5910-1998 |
轿车 质量分布 |
Passenger car--Mass distribution |
全部代替：GB 5910-1986 |
1998-5-6 |
1999-1-1 |
| GB/T 17340-1998 |
汽车安全玻璃的尺寸、形状及外观 |
Road vehicles--Safety glasses--Dimensions，shapes and appearances |
|
1998-4-24 |
1998-11-1 |
| GB/T 17275-1998 |
货运全挂车通用技术条件 |
Technical requirements for freight full trailers |
|
1998-3-20 |
1998-10-1 |
| QC/T 250-1998 |
矿用自卸汽车试验方法 制动性能试验 |
|
|
1998-2-23 |
1998-7-1 |
| QC/T 901-1998 |
汽车发动机产品质量检验评定方法 |
|
全部代替：QCn 29008-1991中发动机部分 |
1998-2-23 |
1998-3-15 |
| QC/T 225-1997 |
摩托车和轻便摩托车用起动电机技术条件和试验方法 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 226-1997 |
摩托车和轻便摩托车制动蹄总成技术条件 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.10-1997 |
摩托车和轻便摩托车操纵拉索 试验方法 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.1-1997 |
摩托车和轻便摩托车操纵拉索 技术条件 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.2-1997 |
摩托车和轻便摩托车操纵拉索 钢丝绳 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.3-1997 |
摩托车和轻便摩托车操纵拉索 接头 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.4-1997 |
摩托车和轻便摩托车操纵拉索 套管 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.5-1997 |
摩托车和轻便摩托车操纵拉索 套管帽 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.6-1997 |
摩托车和轻便摩托车操纵拉索 调整螺管 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.7-1997 |
摩托车和轻便摩托车操纵拉索 调整螺母 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.8-1997 |
摩托车和轻便摩托车操纵拉索 护套 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 228.9-1997 |
摩托车和轻便摩托车操纵拉索 销柱 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 229-1997 |
摩托车和轻便摩托车转子机油泵技术条件 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 231-1997 |
摩托车和轻便摩托车反冲起动器技术条件 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 233-1997 |
摩托车和轻便摩托车制动踏板静强度试验方法及性能要求 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 234-1997 |
摩托车和轻便摩托车转向轴承技术条件 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 236-1997 |
汽车内饰材料性能的试验方法 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 237-1997 |
汽车驻车制动器性能台架试验方法 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 238-1997 |
汽车零部件的储存和保管 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 239-1997 |
货车、客车制动器性能要求 |
|
全部代替：JB 3935-1985 |
1997-11-12 |
1998-7-1 |
| QC/T 240-1997 |
车轮轮辐在轮毂上安装尺寸的检验方法 |
|
|
1997-11-12 |
1998-7-1 |
| QC/T 246-1997 |
汽车风窗玻璃电动洗涤器技术条件 |
|
全部代替：JB 3921.1-1985,JB 3921.2-1985 |
1997-11-12 |
1998-7-1 |
| QC/T 900-1997 |
汽车整车产品质量检验评定方法 |
|
全部代替：QCn 29006-1991, QCn 29007-1991, QCn 29008-1991整车部 |
1997-3-5 |
1997-3-15 |
| GB/T 16738-1997 |
道路车辆 世界零件制造厂识别代号(WPMI) |
Road vehicler--World parts manufacturer identifier (WPMI) code |
|
1997-2-21 |
1997-8-1 |
| GB/T 3730.2-1996 |
道路车辆 质量 词汇和代码 |
Road vehicle--Masses--Vocabulary and codes |
全部代替：GB 3730.2-1992 |
1996-12-23 |
1997-7-1 |
| QC/T 216-1996 |
汽车用地毯的性能要求和试验方法 |
|
|
1996-12-18 |
1997-9-1 |
| QC/T 218-1996 |
汽车用转向管柱上组合开关技术条件 |
|
全部代替：ZB/T T36 014-1990 |
1996-12-18 |
1997-9-1 |
| QC/T 219-1996 |
汽车用脚踏式变光开关 |
|
全部代替：JB 3128-1982 |
1996-12-18 |
1997-9-1 |
| QC/T 220-1996 |
汽车用易熔线 |
|
|
1996-12-18 |
1997-9-1 |
| GB/T 16570-1996 |
汽车柴油机架装直列式喷油泵 安装尺寸 |
Motor vehicles--Cradle-mounted in-line fuel injection pumps for diesel engines--Mounting dimensions |
|
1996-10-17 |
1999-4-1 |
| QC/T 207-1996 |
汽车用普通气弹簧 |
|
|
1996-1-31 |
1996-9-1 |
| GB 15741-1995 |
汽车和挂车号牌板(架)及其位置 |
The license plates (crackets) and its position on motor vehicles and trailer |
|
1995-11-16 |
1997-1-1 |
| GB/T 15743-1995 |
轿车侧门强度 |
Passenger car--Strength of side doors |
|
1995-11-16 |
1996-5-1 |
| GB/T 15704-1995 |
轿车车轮冲击试验方法 |
Passenger cars--Wheels--Impact test procedure |
|
1995-9-12 |
1996-3-1 |
| GB/T 15705-1995 |
载货汽车驾驶员操作位置尺寸 |
Trucks--Operating position demensions of driver |
|
1995-9-12 |
1996-3-1 |
| GB/T 15637-1995 |
数字多用表校准仪通用技术条件 |
Generic specification for calibrator of digital multi-meter |
|
1995-7-24 |
1996-1-1 |
| QC/T 198-1995 |
汽车用开关通用技术条件 |
|
全部代替：JB 3126-1982 |
1995-4-20 |
1995-10-1 |
| QC/T 199-1995 |
汽车车轮平衡块 |
|
|
1995-4-20 |
1995-10-1 |
| QC/T 200-1995 |
汽车气制动装置用储气筒技术条件 |
|
全部代替：JB 3783.1-1984,JB 3783.2-1984 |
1995-4-20 |
1995-10-1 |
| QC/T 201-1995 |
汽车气制动用热塑管接头尺寸 |
|
|
1995-4-20 |
1995-10-1 |
| QC/T 202-1995 |
矿用自卸汽车试验方法 牵引性能试验 |
|
|
1995-4-20 |
1995-10-1 |
| QC/T 203-1995 |
矿用自卸汽车驾驶室噪声 测量方法及限值 |
|
|
1995-4-20 |
1995-10-1 |
| QC/T 196-1994 |
汽车工业科学技术档案分类表 |
|
|
1995-2-20 |
1995-5-1 |
| GB 11556-1994 |
汽车风窗玻璃除霜系统的性能要求及试验方法 |
Motor vehicles--Windshield defrosters--Performance requirements and test methods |
|
1994-5-31 |
1995-1-1 |
| GB 11562-1994 |
汽车驾驶员前方视野要求及测量方法 |
Motor vehicles--Forward visibility for drivers--Requirements and measurement methods |
全部代替：GB 11562-1989 |
1994-5-31 |
1995-1-1 |
| GB 15085-1994 |
汽车风窗玻璃刮水器、洗涤器的性能要求及试验方法 |
Motor vehicles--Windshield wipers and washer systems--Performance requirements and test methods |
|
1994-5-31 |
1995-1-1 |
| GB/T 6323.1-1994 |
汽车操纵稳定性试验方法 蛇行试验 |
Controllability and stability test procedure for automobiles--Pylon course slalom test |
|
1994-4-4 |
1994-11-1 |
| GB/T 6323.2-1994 |
汽车操纵稳定性试验方法 转向瞬态响应试验 (转向盘转角阶跃输入) |
Controllability and stability test procedure for automobiles--Steering transient response test(Steering wheel angle step input) |
|
1994-4-4 |
1994-11-1 |
| GB/T 6323.3-1994 |
汽车操纵稳定性试验方法 转向瞬态响应试验 (转向盘转角脉冲输入) |
Contorllability and stability test procedure for automobiles--Steering transient response test(Steering wheel angle pulse input) |
|
1994-4-4 |
1994-11-1 |
| GB/T 6323.4-1994 |
汽车操纵稳定性试验方法 转向回正性能试验 |
Controllability and stabilitytest procedure for automobiles--Returnability test |
|
1994-4-4 |
1994-11-1 |
| GB/T 6323.5-1994 |
汽车操纵稳定性试验方法 转向轻便性试验 |
Controllability and stability test procedure for automobiles--Steering efforts test procedure |
|
1994-4-4 |
1994-11-1 |
| GB/T 6323.6-1994 |
汽车操纵稳定性试验方法 稳态回转试验 |
Controllability and stability test procedure for automobiles--Steady static circular test procedure |
|
1994-4-4 |
1994-11-1 |
| QC/T 64-1993 |
摩托车化油器技术条件 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 65-1993 |
摩托车化油器试验方法 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 66-1993 |
摩托车离合器技术条件 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 68-1993 |
摩托车磁电机(有触点)技术条件 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 69-1993 |
摩托车磁电机(无触点)技术条件 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 70-1993 |
摩托车发动机噪声限值及测量方法 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 73-1993 |
汽车电气设备产品型号编制方法 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.10-1993 |
矿用自卸汽车试验方法 冷却系冷却能力试验 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.11-1993 |
矿用自卸汽车试验方法 使用可靠性试验 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.1-1993 |
矿用自卸汽车试验方法 通则 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.2-1993 |
矿用自卸汽车试验方法 驾驶员座位基准点R测量方法 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.3-1993 |
矿用自卸汽车试验方法 爬坡能力试验 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.4-1993 |
矿用自卸汽车试验方法 自动换档转速或车速试验 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.5-1993 |
矿用自卸汽车试验方法 恒功试验 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.6-1993 |
矿用自卸汽车试验方法 燃料消耗量试验 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.7-1993 |
矿用自卸汽车试验方法 应急转向能力试验 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.8-1993 |
矿用自卸汽车试验方法 行驶平顺性试验 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 76.9-1993 |
矿用自卸汽车试验方法 空气调节系统性能试验 |
|
|
1993-10-20 |
1994-1-1 |
| QC/T 77-1993 |
汽车液压制动轮缸技术条件 |
|
全部代替：JB 540-1964 |
1993-10-20 |
1994-1-1 |
| QC/T 55-1993 |
汽车座椅动态舒适性试验方法 |
|
|
1993-4-22 |
1993-6-1 |
| QC/T 56-1993 |
汽车座椅衬垫材料性能试验方法 |
|
|
1993-4-22 |
1993-6-1 |
| GB/T 14171-1993 |
汽车气制动系管路螺纹孔和管接头外螺纹 |
Motor vehicles--Pneumatic brakingsystems--Tapped holes and male fittings |
|
1993-3-1 |
1993-7-1 |
| GB/T 13881-1992 |
牵引车与挂车之间气制动管连接器 |
Pneumatic braking connections between motor vehicles and towed vehicles |
|
1992-11-14 |
1993-7-15 |
| QC/T 29090-1992 |
汽车用刮水电动机技术条件 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 29092-1992 |
汽车用暖风电动机技术条件 |
|
全部代替：JB 3257-1983 |
1992-11-11 |
1993-1-1 |
| QC/T 29096-1992 |
汽车转向器总成台架试验方法 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 29097-1992 |
汽车转向器总成技术条件 |
|
全部代替：JB 2957-1981 |
1992-11-11 |
1993-1-1 |
| QC/T 29099-1992 |
摩托车用硅整流交流发电机通用技术条件 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 29100-1992 |
图书馆车技术条件 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 29101-1992 |
汽车用拉索总成 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 29104-1992 |
专用汽车液压系统液压油固体污染度限值 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 29105.1-1992 |
专用汽车液压系统液压油固体污染度测试方法 术语及其定义 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 29105.2-1992 |
专用汽车液压系统液压油固体污染度测试方法 装置及装置的清洗 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 29105.3-1992 |
专用汽车液压系统液压油固体污染度测试方法 取样 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 29105.4-1992 |
专用汽车液压系统液压油固体污染度测试方法 显微镜颗粒计数法 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 46-1992 |
汽车风窗玻璃电动刮水器型式与尺寸 |
|
全部代替：JB 3032-1981 |
1992-11-11 |
1993-1-1 |
| QC/T 47-1992 |
汽车座椅术语 |
|
|
1992-11-11 |
1993-1-1 |
| QC/T 48-1992 |
汽车汽油滤清器 |
|
全部代替：JB 2994-1981 |
1992-11-11 |
1993-1-1 |
| GB/T 3730.3-1992 |
汽车和挂车的术语及其定义 车辆尺寸 |
Motor vehicles and towed vehicles--Dimensions of vehicles--Terms and definitions |
全部代替：GB 3730.3-1992 |
1992-8-15 |
1993-4-1 |
| QC/T 21-1992 |
气卸散装电石粉车技术条件 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 22-1992 |
计量检测车 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 23-1992 |
奶罐车 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 24-1992 |
邮件运输车技术条件 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 34-1992 |
汽车的故障模式及分类 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 35-1992 |
汽车与挂车 气压控制装置台架试验方法 |
|
全部代替：JB 3737-1984 |
1992-7-1 |
1993-6-1 |
| QC/T 36-1992 |
汽车与挂车 气压控制装置通用技术条件 |
|
全部代替：JB 3738-1984 |
1992-7-1 |
1993-6-1 |
| QC/T 37-1992 |
汽车与挂车 气压调节保护装置通用技术条件 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 38-1992 |
汽车与挂车 气压调节保护装置台架试验方法 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 39-1992 |
汽车摩托车发动机活塞环检测方法 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 40-1992 |
气卸散装电石粉车性能试验方法 |
|
|
1992-7-1 |
1993-9-1 |
| QC/T 41-1992 |
环境监测车 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 42-1992 |
汽车盘式制动器摩擦块试验后表面和材料缺陷的评价 |
|
|
1992-7-1 |
1993-6-1 |
| QC/T 1-1992 |
汽车产品图样的基本要求 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 15-1992 |
汽车塑料制品通用试验方法 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 16-1992 |
点火线圈通用技术条件 |
|
全部代替：JB 3125-1982 |
1992-5-21 |
1993-6-1 |
| QC/T 17-1992 |
汽车零部件耐候性试验一般规则 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 18-1992 |
汽车产品图样及设计文件 术语 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 20-1992 |
汽车用气压式制动灯开关技术条件 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 2-1992 |
汽车产品图样格式 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 29087-1992 |
汽车焊接加工零件未注公差尺寸的极限偏差 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 29089-1992 |
汽车软化仪表板表皮 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 3-1992 |
汽车产品图样及设计文件完整性 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 4-1992 |
汽车产品图样及设计文件采用与更改办法 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 5-1992 |
汽车产品图样及设计文件标准化审查 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 6-1992 |
汽车产品明细表编制规则 |
|
|
1992-5-21 |
1993-6-1 |
| QC/T 7-1992 |
汽车产品设计文件编号规则 |
|
|
1992-5-21 |
1992-6-1 |
| QC/T 29058-1992 |
载货汽车车箱技术条件 |
|
|
1992-4-14 |
1993-1-1 |
| QC/T 29061-1992 |
汽车发动机用蜡式调温器技术条件 |
|
|
1992-4-14 |
1993-1-1 |
| QC/T 29078-1992 |
汽车用空气压缩机技术条件 |
|
|
1992-4-14 |
1993-1-1 |
| QC/T 29082-1992 |
汽车传动轴总成技术条件 |
|
|
1992-4-14 |
1993-1-1 |
| QC/T 29035-1991 |
汽车钢板弹簧技术条件 |
|
|
1991-11-5 |
1992-1-1 |
| QC/T 29025-1991 |
汽车管带式散热器芯子型式尺寸 |
|
|
1991-10-17 |
1991-11-15 |
| QC/T 29032-1991 |
汽车用空气滤清器堵塞报警传感器 |
|
|
1991-10-7 |
1991-11-15 |
| GB/T 13061-1991 |
汽车悬架用空气弹簧 橡胶气囊 |
Air spring for automotive suspension--Rubber bellows |
|
1991-7-12 |
1992-3-1 |
| GB/T 1332-1991 |
载货汽车定型试验规程 |
Trucks--Engineering approval evaluation program |
全部代替：GB 1332-1977 |
1991-7-11 |
1992-3-1 |
| QC/T 463-1999 |
汽车用液力变矩器技术条件 |
Motor vehicles＿Hydrodynamic torque converter＿The specifications |
全部代替：GB/T 13049-1991* |
1991-7-11 |
1992-3-1 |
| QC/T 464-1999 |
淋浴车通用技术条件 |
General specifications for mobile shower bath |
全部代替：GB/T 13050-1991* |
1991-7-11 |
1992-3-1 |
| QC/T 480-1999 |
汽车操纵稳定性指标限值与评价方法 |
Criterion thresholds and evaluation of controllability and stability for automobiles |
全部代替：GB/T 13047-1991* |
1991-7-11 |
1992-3-1 |
| QC/T 29009-1991* |
汽车用电线接头 技术条件 |
|
|
1991-5-16 |
1991-9-1 |
| QC/T 29010-1991* |
汽车用低压电线接头型式、尺寸和技术要求 |
|
全部代替：JB 1450-1974,JB 1451-1974,JB 1452-1974 |
1991-5-16 |
1991-6-1 |
| QC/T 29011-1991* |
汽车用点火线电线接头型式、尺寸和技术要求 |
|
全部代替：JB 1455-1981 |
1991-5-16 |
1991-6-1 |
| QC/T 29013-1991* |
汽车用蓄电池电线接头型式、尺寸和技术要求 |
|
全部代替：JB 1456-1974 |
1991-5-16 |
1991-6-1 |
| QC/T 29015-1991 |
自卸汽车栏板锁紧装置技术条件 |
|
|
1991-5-16 |
1991-6-1 |
| QC/T 29017-1991 |
汽车模制塑料零件未注公差尺寸的极限偏差 |
|
全部代替：原QCn 29017-1991 |
1991-5-16 |
1991-6-1 |
| QC/T 29018-1991 |
汽车碳氮共渗齿轮金相检验 |
|
全部代替：原QCn 29018-1991(代替JB 2782-1979) |
1991-5-16 |
1991-6-1 |
| QC/T 479-1999 |
货车、客车制动器台架试验方法 |
Trucks and buses＿Brake＿Bench test methods |
全部代替：JB 2805-1979* |
1991-3-22 |
1991-12-1 |
| GB/T 12673-1990 |
汽车主要尺寸测量方法 |
Molor vehicles--Basic dimensions--Measuring method |
|
1990-12-30 |
1991-10-1 |
| GB/T 12674-1990 |
汽车质量(重量)参数测定方法 |
Motor vehicles--Weight parameter--Measuringmethod |
|
1990-12-30 |
1991-10-1 |
| GB/T 12677-1990 |
汽车技术状况行驶检查方法 |
Motor vehicles--Technical condition--Inspection method |
|
1990-12-30 |
1991-10-1 |
| GB/T 12678-1990 |
汽车可靠性行驶试验方法 |
Reliability running test method for automobiles |
|
1990-12-30 |
1991-10-1 |
| GB/T 12679-1990 |
汽车耐久性行驶试验方法 |
Motor vehicles--Durability running--Test method |
|
1990-12-30 |
1991-10-1 |
| GB/T 12534-1990 |
汽车道路试验方法通则 |
Motor vehicles--General rules of road test method |
|
1990-12-12 |
1991-9-1 |
| GB/T 12536-1990 |
汽车滑行试验方法 |
Motor vehicles--Coastdown--Test method |
|
1990-12-12 |
1991-9-1 |
| GB/T 12537-1990 |
汽车牵引性能试验方法 |
Motor vehicles--Towing performance--Test method |
|
1990-12-12 |
1991-9-1 |
| GB/T 12539-1990 |
汽车爬陡坡试验方法 |
Motor vehicles--Steep hill climbing--Test method |
|
1990-12-12 |
1991-9-1 |
| GB/T 12541-1990 |
汽车地形通过性试验方法 |
Motor vehicles--Passing topography capacity--Test method |
|
1990-12-12 |
1991-9-1 |
| GB/T 12544-1990 |
汽车最高车速试验方法 |
Motor vehicles--Maximum speed--Test method |
|
1990-12-12 |
1991-9-1 |
| GB/T 12548-1990 |
汽车速度表、里程表检验校正方法 |
Motor vehicles--Speedometer and odometer--Calibration method |
|
1990-12-12 |
1991-9-1 |
| GB/T 12549-1990 |
汽车操纵稳定性术语及其定义 |
Automotive controllability and stability--Terms and definitions |
|
1990-12-12 |
1991-9-1 |
| QC/T 643-2000 |
车辆用密封条的污染性试验方法 |
Vehicle＿Test method of contact stain＿Sealing strips |
全部代替：GB/T 12426-1990* |
1990-7-21 |
1991-5-1 |
| QC/T 271-1999 |
微型货车防雨密封性试验方法 |
|
|
1990-7-5 |
1991-3-1 |
| QC/T 298-1999 |
微型货车整车悬架静负荷特性测定方法 |
|
|
1990-7-5 |
1991-3-1 |
| QC/T 438-1999 |
汽车点火系高压塑料件技术条件 |
|
全部代替：ZB T37 006-1990* |
1990-4-24 |
1991-1-1 |
| QC/T 266-1999 |
汽车零件未注公差尺寸的极限偏差 一般要求 |
|
|
1989-12-7 |
1990-4-1 |
| QC/T 267-1999 |
汽车切削加工零件未注公差尺寸的极限偏差 |
|
|
1989-12-7 |
1990-4-1 |
| QC/T 268-1999 |
汽车冷冲压加工零件未注公差尺寸的极限偏差 |
|
|
1989-12-7 |
1990-4-1 |
| QC/T 269-1999 |
汽车铸造零件未注公差尺寸的极限偏差 |
|
|
1989-12-7 |
1990-4-1 |
| QC/T 270-1999 |
汽车钢模锻造零件未注公差尺寸的极限偏差 |
|
|
1989-12-7 |
1990-4-1 |
| QC/T 272-1999 |
汽车用铝合金铸件技术条件 |
|
|
1989-12-7 |
1990-4-1 |
| QC/T 273-1999 |
汽车用锌合金、铝合金、铜合金压铸件技术条件 |
|
|
1989-12-7 |
1990-4-1 |
| QC/T 276-1999 |
汽车零件热处理硬度规范 |
|
|
1989-12-7 |
1990-4-1 |
| QC/T 284-1999 |
汽车摩托车发动机球墨铸铁活塞环金相标准 |
|
|
1989-12-7 |
1990-6-1 |
| QC/T 293-1999 |
汽车半轴台架试验方法 |
|
全部代替：ZB T21 003-1989* |
1989-12-7 |
1990-4-1 |
| QC/T 294-1999 |
汽车半轴技术条件 |
|
全部代替：ZB T21 004-1989* |
1989-12-7 |
1990-4-1 |
| QC/T 427-1999 |
汽车用电源总开关技术条件 |
|
全部代替：ZB T36 013-1989* |
1989-12-7 |
1990-6-1 |
| QC/T 447-1999 |
建筑大板运输车技术条件 |
|
全部代替：ZB/T T51 002-1989* |
1989-12-7 |
1990-4-1 |
| QC/T 456-1999 |
颗粒粮食散装车技术条件 |
|
全部代替：ZB/T T54 004-1989* |
1989-12-7 |
1990-6-1 |
| QC/T 472-1999 |
汽车制动器衬片耐水、盐水、油和制动液性能试验方法 |
Motor vehicles＿Brake linings resistance to water,saline solution,oil and brake fluid＿Test procedure |
全部代替：GB/T 11609-1989* |
1989-8-28 |
1990-3-1 |
| QC/T 473-1999 |
汽车制动器衬片材料内抗剪强度试验方法 |
Motor vehicles＿Brake linings＿Internal shear strength of lining material＿Test procedure |
全部代替：GB/T 11610-1989* |
1989-8-28 |
1990-3-1 |
| GB 11565-1989 |
轿车风窗玻璃刮水器刮刷面积 |
Passenger cars--Windshield wipers--Wiped areas |
|
1989-8-10 |
1990-3-1 |
| QC/T 470-1999 |
汽车自动变速器操纵装置的要求 |
Motor vehicles＿Automatic transmission control equipments＿Requirements |
全部代替：GB 11560-1989* |
1989-8-10 |
1990-3-1 |
| QC/T 283-1999 |
汽车发动机镶耐磨圈活塞技术条件 |
|
|
1989-7-6 |
1990-1-1 |
| QC/T 414-1999 |
汽车用低压电线的颜色 |
|
全部代替：ZB T35 002-1989* |
1989-7-6 |
1990-1-1 |
| QC/T 583-1999 |
汽车制动器衬片显气孔率试验方法 |
|
|
1989-7-6 |
1990-1-1 |
| QC/T 431-1999 |
火花塞瓷绝缘体技术条件 |
|
全部代替：ZB T37 004-1989* |
1989-3-30 |
1990-1-1 |
| QC/T 305-1999 |
汽车动力转向控制阀总成技术条件 |
|
全部代替：ZB T23 007-1989* |
1989-3-10 |
1989-7-1 |
| QC/T 306-1999 |
汽车动力转向控制阀总成台架试验方法 |
|
全部代替：ZB T23 008-1989* |
1989-3-10 |
1989-7-1 |
| QC/T 424-1999 |
汽车用交流发电机电气特性试验方法 |
|
全部代替：ZB T36 010-1989* |
1989-3-10 |
1989-7-1 |
| QC/T 432-1999 |
火花塞瓷绝缘体试验方法 外观与尺寸试验方法 |
|
全部代替：ZB T37 005.1-1989* |
1989-1-1 |
2024-11-18 |
| QC/T 433-1999 |
火花塞瓷绝缘体试验方法 耐压试验方法 |
|
全部代替：ZB T37 005.2-1989* |
1989-1-1 |
2024-11-18 |
| QC/T 434-1999 |
火花塞瓷绝缘体试验方法 体积密度试验方法 |
|
全部代替：ZB T37 005.3-1989* |
1989-1-1 |
2024-11-18 |
| QC/T 435-1999 |
火花塞瓷绝缘体试验方法 高温绝缘电阻试验方法 |
|
全部代替：ZB T37 005.4-1989* |
1989-1-1 |
2024-11-18 |
| QC/T 436-1999 |
火花塞瓷绝缘体试验方法 耐冷热急变性能试验方法 |
|
全部代替：ZB T37 005.5-1989* |
1989-1-1 |
2024-11-18 |
| QC/T 437-1999 |
火花塞瓷绝缘体试验方法 冲击强度试验方法 |
|
全部代替：ZB T37 005.6-1989* |
1989-1-1 |
2024-11-18 |
| QC/T 429-1999 |
高能点火装置产品型号编制方法 |
|
|
1988-12-3 |
1989-7-1 |
| QC/T 262-1999 |
汽车渗碳齿轮金相检验 |
|
|
1988-9-14 |
1989-1-1 |
| QC/T 263-1999 |
60°牙型角英寸制外锥螺纹零件的结构尺寸 |
|
|
1988-9-14 |
1989-1-1 |
| QC/T 287-1999 |
汽车燃油滤清器纸质滤芯尺寸规格 |
|
全部代替：ZB T13 006-1988* |
1988-9-14 |
1989-1-1 |
| QC/T 291-1999 |
汽车机械式分动器性能要求 |
|
|
1988-9-14 |
1989-1-1 |
| QC/T 292-1999 |
汽车机械式分动器台架试验方法 |
|
|
1988-9-14 |
1989-1-1 |
| QC/T 461-1999 |
自卸汽车换向阀技术条件 |
|
|
1988-9-14 |
1989-1-1 |
| QC/T 466-1999 |
翼开启式栏板起重运输汽车技术条件 |
Specification for wing＿Like top＿Opened with plank lifting gargo truck |
全部代替：GB 9418-1988* |
1988-6-25 |
1989-1-1 |
| QC/T 376-1999 |
六角头螺塞 |
Hexagon outside head plug |
|
1988-3-21 |
1989-1-1 |
| QC/T 377-1999 |
开槽柱形螺塞 |
Slotted cylinder plug |
|
1988-3-21 |
1989-1-1 |
| QC/T 378-1999 |
内六角锥形螺塞 |
Hexagon countersunk headless cone plug |
全部代替：ZB T32 001.3-1987* |
1988-3-21 |
1989-1-1 |
| QC/T 379-1999 |
方头锥形螺塞 |
Square head cone plug |
全部代替：ZB T32 001.4-1987* |
1988-3-21 |
1989-1-1 |
| QC/T 381-1999 |
六角头锥形螺塞 |
Hexagon outside head cone plug |
全部代替：ZB T32 001.6-1987* |
1988-3-21 |
1989-1-1 |
| QC/T 382-1999 |
开槽锥形螺塞 |
Slotted cone plug |
全部代替：ZB T32 001.7-1987* |
1988-3-21 |
1989-1-1 |
| QC/T 383-1999 |
六角头锥形磁性螺塞 |
Hexagon outside head cone plugs with magnetic core |
全部代替：ZB T32 001.8-1987* |
1988-3-21 |
1989-1-1 |
| QC/T 384-1999 |
方槽锥形磁性螺塞 |
Square countersunk headless cone plugs with magnetic core |
全部代替：ZB T32 001.9-1987* |
1988-3-21 |
1989-1-1 |
| QC/T 385-1999 |
六角头磁性螺塞 |
Hexagon outside head plugs with magnetic core |
|
1988-3-21 |
1989-1-1 |
| QC/T 386-1999 |
磁芯 |
Magnetic core |
|
1988-3-21 |
1989-1-1 |
| QC/T 310-1999 |
半挂车支承装置 |
|
全部代替：ZB T73 001-1987* |
1988-1-7 |
1988-7-11 |
| QC/T 451-1999 |
售货汽车 通用技术条件 |
|
|
1988-1-7 |
1988-7-1 |
| QC/T 452-1999 |
住宿车 通用技术条件 |
|
|
1988-1-7 |
1988-7-1 |
| QC/T 455-1999 |
牲畜运输汽车 技术条件 |
The technical specifications of livestock vehicle |
|
1988-1-7 |
1988-7-1 |
| QC/T 362-1999 |
六角较薄螺母 |
|
全部代替：ZB T31 034-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 363-1999 |
盆型圆锥垫圈 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 364-1999 |
滚花圆柱销 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 368-1999 |
弹性夹片 |
|
全部代替：ZB T31 041.1-1988* |
1988-1-1 |
1988-1-1 |
| QC/T 369-1999 |
多管夹片 |
|
全部代替：ZB T31 041.2-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 370-1999 |
单管夹片 |
|
全部代替：ZB T31 041.3-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 371-1999 |
对称双管夹片 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 372-1999 |
焊接式单头夹片 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 373-1999 |
一端固定式双管夹片 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 374-1999 |
中间固定式双管夹片 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 375-1999 |
一端固定式单管夹片 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 387-1999 |
塞片 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 388-1999 |
碗形塞片 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 399-1999 |
卡套式锥螺纹直通接头体 |
|
全部代替：ZB T32 007.1-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 400-1999 |
卡套式锥螺纹直角三通接头体 |
|
全部代替：ZB T32 007.2-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 401-1999 |
卡套式锥螺纹直角接头体 |
|
全部代替：ZB T32 007.3-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 402-1999 |
卡套式锥螺纹三通接头体 |
|
全部代替：ZB T32 007.4-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 403-1999 |
扩口式锥螺纹直通管接头体 |
|
全部代替：ZB T32 008.1-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 404-1999 |
扩口式锥螺纹直角管接头体 |
|
全部代替：ZB T32 008.2-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 405-1999 |
扩口式锥螺纹三通管接头体 |
|
全部代替：ZB T32 008.3-1988* |
1988-1-1 |
2024-11-18 |
| QC/T 407-1999 |
直通式滑脂嘴 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 408-1999 |
弯颈式滑脂嘴 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 412-1999 |
钢球式通气塞 |
|
|
1988-1-1 |
1988-1-1 |
| QC/T 304-1999 |
汽车转向拉杆接头总成台架试验方法 |
Automotive steering tie rod end Test procedure |
全部代替：ZB T23 006-1987* |
1987-12-31 |
1988-7-1 |
| QC/T 327-1999 |
汽车用球头接头 |
Ball joint for motor vehicldes |
|
1987-12-31 |
1988-7-1 |
| QC/T 328-1999 |
汽车用螺杆式球销 |
Screw type ball pin for motor vehicles |
|
1987-12-31 |
1988-7-1 |
| QC/T 329-1999 |
汽车用球销球座 |
Ball pin seat for motor vehicles |
|
1987-12-31 |
1988-7-1 |
| QC/T 330-1999 |
汽车用簧片螺母 |
Spring nut for motor vehicles |
|
1987-12-31 |
1988-7-1 |
| QC/T 333-1999 |
内外锯齿锁紧垫圈 |
Internal/external serration lock washer |
|
1987-12-31 |
1988-7-1 |
| QC/T 336-1999 |
螺纹叉 |
Threaded connecting fork |
|
1987-12-31 |
1988-7-1 |
| QC/T 337-1999 |
焊接叉 |
Weldable connecting fork |
|
1987-12-31 |
1988-7-1 |
| QC/T 338-1999 |
铅封 |
Sealing lead |
|
1987-12-31 |
1988-7-1 |
| QC/T 343-1999 |
螺母保护帽 |
Protective cap for nut |
|
1987-12-31 |
1988-7-1 |
| QC/T 344-1999 |
孔用压扁钢丝挡圈 |
Flat wire stopper ring for holes |
|
1987-12-31 |
1988-7-1 |
| QC/T 345-1999 |
轴用压扁钢丝挡圈 |
Flat wire stopper ring for shafts |
|
1987-12-31 |
1988-7-1 |
| QC/T 349-1999 |
塑料紧箍带 |
plastic hoop |
|
1987-12-31 |
1988-7-1 |
| QC/T 350-1999 |
塑料开尾销钉 |
plastic split dowel |
|
1987-12-31 |
1988-7-1 |
| GB/T 7825-1987 |
火花塞 |
Spark plugs |
|
1987-6-3 |
1988-1-1 |
| GB/T 7680-1987 |
液力变矩器性能试验方法 |
Hydrodynamic torque converter--Method of performance tests |
|
1987-4-17 |
1988-1-1 |
| QC/T 302-1999 |
汽车动力转向动力缸台架试验方法 |
|
全部代替：ZB T23 004-1987* |
1987-4-3 |
1988-1-1 |
| QC/T 303-1999 |
汽车动力转向油罐技术条件 |
|
全部代替：ZB T23 005-1987* |
1987-4-3 |
1988-1-1 |
| GB/T 7361-1987 |
半挂牵引车的制动及电路连接位置 |
Brake and electrical connection locations of semi-trailer towing vehicle |
|
1987-3-9 |
1988-1-1 |
| GB/T 7362-1987 |
全挂牵引车和货车的制动及电路连接位置 |
Brake and electrical connection locations of truck andtrailer-towing vehicle |
|
1987-3-9 |
1988-1-1 |
| QC/T 279-1999 |
汽车、摩托车发动机钢带组合油环技术条件 |
Multi-piece steel rail oil control rings for automobile and motorcycle engines＿Technical requirements |
|
1987-3-5 |
1987-7-1 |
| QC/T 439-1999 |
摆臂式自装卸汽车 技术条件 |
Swing arm type Self-loading truck＿Technical requirements |
全部代替：ZB T43 001-1987* |
1987-3-5 |
1987-7-1 |
| QC/T 440-1999 |
摆臂式自装卸汽车 试验方法 |
Swing arm type Self loading truck＿Test method |
全部代替：ZB T43 002-1987* |
1987-3-5 |
1987-7-1 |
| QC/T 454-1999 |
养蜂汽车 技术条件 |
Bee truck＿Technical requirements |
|
1987-3-5 |
1987-7-1 |
| QC/T 301-1999 |
汽车动力转向动力缸技术条件 |
|
全部代替：ZB T23 003-1987* |
1987-3-4 |
1988-1-1 |
| QC/T 448-1999 |
炊事汽车 通用技术条件 |
Cook truclk-general technical requirements |
|
1987-2-6 |
1987-12-1 |
| QC/T 410-1999 |
通气塞 |
|
|
1987-1-1 |
1987-1-1 |
| QC/T 411-1999 |
保险阀 |
|
|
1987-1-1 |
1987-1-1 |
| QC/T 277-1999 |
起动机特性试验方法 |
|
全部代替：ZB T11 001-1986* |
1986-11-6 |
1987-7-1 |
| QC/T 415-1999 |
汽车用点烟器 技术条件 |
|
全部代替：ZB T36 001-1986* |
1986-11-6 |
1987-7-1 |
| QC/T 416-1999 |
点火系统的测试方法 |
|
全部代替：ZB T36 002-1986* |
1986-11-6 |
1987-7-1 |
| GB/T 6786-1986 |
M14×1.25 平座火花塞及其气缸盖安装孔 |
Spark plug M14×1.25 with flat seating and cylinder head housing |
|
1986-8-28 |
1987-7-1 |
| GB/T 6787-1986 |
M14×1.25 矮型平座火花塞及其气缸盖安装孔 |
Compact spark plug M14×1.25 with flat seating and cylinder head housing |
|
1986-8-28 |
1987-7-1 |
| GB/T 6788-1986 |
M14×1.25 矮型锥座火花塞及其气缸盖安装孔 |
Compact spark plug M14×1.25 with conical seating and cylinder head housing |
|
1986-8-28 |
1987-7-1 |
| GB/T 6791-1986 |
M18×1.5 锥座火花塞及其气缸盖安装孔 |
Spark plug M18×1.5 with conical seating and cylinder head housing |
|
1986-8-28 |
1987-7-1 |
| QC/T 483-1999 |
汽车前轴疲劳寿命限值 |
|
全部代替：JB 4285-1986* |
1986-7-28 |
1987-2-1 |
| QC/T 494-1999 |
汽车前轴 刚度试验方法 |
|
|
1986-6-10 |
1986-11-1 |
| QC/T 557-1999 |
汽车用液力变扭器台架 试验方法 |
|
|
1986-6-10 |
1986-11-1 |
| GB/T 5921-1986 |
汽车和挂车 气压制动系部件上接口的识别标记 |
Motor vehicles and towed vehicles--Air braking systems--Identification of connections on units |
|
1986-3-5 |
1986-12-1 |
| QC/T 465-1999 |
汽车机械式变速器分类的术语及定义 |
Automotive mechanical transmission terminology and definition |
全部代替：GB 5925-1986* |
1986-3-5 |
1986-12-1 |
| QC/T 484-1999 |
汽车 油漆涂层 |
|
|
1986-2-6 |
1986-2-6 |
| QC/T 580-1999 |
汽车变速器 安装尺寸 |
|
|
1985-12-31 |
1986-8-1 |
| GB/T 5727-1985* |
汽车液力变速器术语及定义 |
Automotive hydrodynamic transmission terminology and definition |
|
1985-12-16 |
1986-10-1 |
| GB/T 5728-1985* |
汽车离合器术语及其定义 |
Motor vehicle clutch terms and definitions |
|
1985-12-16 |
1986-10-1 |
| GB/T 5333-1985* |
汽车驱动桥术语及定义 |
Automotive drive axle nomenclature and definitions |
|
1985-8-31 |
1986-5-1 |
| GB/T 5337-1985 |
汽车电器、灯具和仪表名词术语 |
Nomenclature and terminology for automotive electrical equipment， lighting and instrumentation |
|
1985-8-31 |
1986-5-1 |
| QC/T 577-1999 |
轿车客厢内部尺寸测量方法 |
|
|
1985-8-16 |
1986-3-1 |
| QC/T 571-1999 |
汽车清洁度工作导则 名词、术语 |
|
|
1985-8-6 |
1986-3-1 |
| QC/T 572-1999 |
汽车清洁度工作导则 测定方法 |
|
|
1985-8-6 |
1986-3-1 |
| QC/T 573-1999 |
汽车清洁度工作导则 人、物和环境 |
|
|
1985-8-6 |
1986-3-1 |
| QC/T 574-1999 |
汽车清洁度工作导则 抽样规则 |
|
|
1985-8-6 |
1986-3-1 |
| QC/T 575-1999 |
汽车清洁度工作导则 杂质的分析方法 |
|
|
1985-8-6 |
1986-3-1 |
| QC/T 570-1999 |
汽车发动机气缸套 技术条件 |
|
|
1985-7-10 |
1986-1-1 |
| GB/T 5180-1985* |
汽车悬架术语及定义 |
Automotive suspension＿Terms and definitions |
|
1985-5-11 |
1986-3-1 |
| QC/T 563-1999 |
汽车转向盘 试验方法 |
|
全部代替：JB 3979-1985* |
1985-4-4 |
1985-11-1 |
| QC/T 566-1999 |
轿车的外部防护 |
|
|
1985-4-4 |
1985-11-1 |
| QC/T 487-1999 |
汽车保险杠的位置尺寸 |
|
|
1985-3-29 |
1985-10-1 |
| QC/T 552-1999 |
汽车、摩托车发动机 铸造铝活塞技术条件 |
|
|
1985-2-26 |
1985-8-1 |
| QC/T 554-1999 |
汽车、摩托车发动机 活塞环技术条件 |
|
|
1985-2-26 |
1985-8-1 |
| QC/T 556-1999 |
汽车制动器 温度测量和热电偶安装 |
|
|
1985-2-26 |
1985-8-1 |
| QC/T 558-1999 |
汽车发动机 轴瓦双金属结合强度破坏性试验方法 |
|
|
1985-2-26 |
1985-8-1 |
| QC/T 547-1999 |
汽车发动机螺旋衬簧铸铁油环技术条件 |
|
|
1985-2-8 |
1985-8-1 |
| QC/T 548-1999 |
汽车用洗涤电动机 技术条件 |
|
全部代替：JB 3918-1985* |
1985-2-8 |
1985-8-1 |
| QC/T 549-1999 |
汽车倒车报警器 |
|
|
1985-2-8 |
1985-8-1 |
| QC/T 550-1999 |
汽车用蜂鸣器 |
|
|
1985-2-8 |
1985-8-1 |
| QC/T 551-1999 |
汽车发动机 飞轮壳安装尺寸 |
|
|
1985-2-8 |
1985-8-1 |
| QC/T 491-1999 |
汽车筒式减振器 尺寸系列及技术条件 |
|
全部代替：JB 1459-1985* |
1985-2-5 |
1985-8-1 |
| QC/T 540-1999 |
汽车柴油机"S"尺寸的2型法兰或压板安装喷油器体 |
|
|
1985-2-5 |
1985-8-1 |
| QC/T 541-1999 |
汽车柴油机"S"尺寸的Ⅱ型法兰或压板安装喷油器体 |
|
|
1985-2-5 |
1985-8-1 |
| QC/T 542-1999 |
汽车柴油机"S"尺寸的5型和6型法兰或压板安装喷油器体 |
|
|
1985-2-5 |
1985-8-1 |
| QC/T 543-1999 |
汽车柴油机"S"尺寸的Ⅰ型螺纹安装喷油器体 |
|
|
1985-2-5 |
1985-8-1 |
| QC/T 545-1999 |
汽车筒式减振器 台架试验方法 |
|
|
1985-2-5 |
1985-8-1 |
| QC/T 516-1999 |
汽车发动机轴瓦锡基和铅基合金 金相标准 |
|
|
1984-12-28 |
1985-7-1 |
| QC/T 533-1999 |
汽车驱动桥台架试验方法 |
|
全部代替：JB 3803-1984* |
1984-12-12 |
1985-5-1 |
| QC/T 534-1999 |
汽车驱动桥台架试验评价指标 |
|
全部代替：JBn 3804-1984* |
1984-12-12 |
1985-5-1 |
| GB/T 4783-1984* |
汽车悬挂系统的固有频率和阻尼比测定方法 |
Method of measurement for natural frequency and damping ratio＿Automotive suspension system |
|
1984-11-8 |
1985-10-1 |
| QC/T 527-1999 |
汽车发动机连杆 技术条件 |
|
|
1984-10-6 |
1985-5-1 |
| QC/T 523-1999 |
汽车传动轴总成 台架试验方法 |
|
全部代替：JB 3741-1984* |
1984-8-31 |
1985-1-1 |
| QC/T 526-1999 |
汽车发动机定型 试验规程 |
|
全部代替：JBn 3745-1984* |
1984-8-31 |
1985-1-1 |
| QC/T 517-1999 |
汽车钢板弹簧用U型螺栓及螺母技术条件 |
|
|
1984-5-21 |
1984-12-1 |
| QC/T 520-1999 |
汽车用摩阻材料惯性制动 试验方法 |
|
全部代替：JB 3680-1984* |
1984-5-21 |
1984-12-1 |
| QC/T 521-1999 |
汽车发动机气门挺杆技术条件 |
|
|
1984-5-21 |
1984-12-1 |
| QC/T 493-1999 |
修理车通用技术条件 |
|
|
1984-4-4 |
1984-10-1 |
| QC/T 508-1999 |
汽车柴油机用喷油泵总成技术条件 |
|
|
1984-3-14 |
1984-7-1 |
| QC/T 509-1999 |
汽车柴油机喷油泵柱塞偶件技术条件 |
|
|
1984-3-14 |
1984-7-1 |
| QC/T 510-1999 |
汽车柴油机喷油泵出油阀偶件技术条件 |
|
|
1984-3-14 |
1984-7-1 |
| QC/T 511-1999 |
汽车柴油机喷油器针阀偶件技术条件 |
|
|
1984-3-14 |
1984-7-1 |
| QC/T 512-1999 |
汽车柴油机用喷油泵及喷油器清洁度测定方法及限值 |
|
|
1984-3-14 |
1984-7-1 |
| QC/T 513-1999 |
汽车前轴台架疲劳寿命试验方法 |
|
|
1984-3-14 |
1984-7-1 |
| QC/T 504-1999 |
汽车用点火开关技术条件 |
|
|
1982-7-2 |
1983-1-1 |
| QC/T 505-1999 |
汽车用车灯开关技术条件 |
|
全部代替：JB 3129-1982* |
1982-7-2 |
1983-1-1 |
| QC/T 506-1999 |
汽车用仪表灯开关技术条件 |
|
全部代替：JB 3130-1982* |
1982-7-2 |
1983-1-1 |
| QC/T 503-1999 |
特种挂车通用技术条件 |
|
全部代替：JB 3006-1981* |
1981-11-30 |
1982-7-1 |
| QC/T 242-2004 |
汽车车轮不平衡量要求及测试方法 |
Unbalance Requirements and Test Methods of Vehicle Wheels |
全部代替：QC/T 242-1997 |
1904-10-20 |
1905-4-1 |
| QC/T 243-2004 |
汽车车轮安装平面度要求及检验方法 |
Performance Requirements and Test Methods of Automobile Wheel's Disc Base Planeness |
全部代替：QC/T 243-1997 |
1904-10-20 |
1905-4-1 |
| QC/T 458-2004 |
计划生育车技术条件 |
The Family Planning Vehicles Specification |
全部代替：QC/T 458-1999 |
1904-10-20 |
1905-4-1 |
| QC/T 639-2004 |
汽车用橡胶密封条 |
Rubber weatherstrips for automobile |
全部代替：QC/T 639-2000,QC/T 640-2000 |
1904-10-20 |
1905-4-1 |
| QC/T 709-2004 |
汽车密封条压缩永久变形试验方法 |
Test method of compression set for automobile weatherstrips |
|
1904-10-20 |
1905-4-1 |
| QC/T 710-2004 |
汽车密封条压缩负荷试验方法 |
Test method of compression load for automobile weather-strips |
|
1904-10-20 |
1905-4-1 |
| QC/T 711-2004 |
汽车密封条植绒耐磨性试验方法 |
Test method of abrasion of flock for automotive weather-strip |
|
1904-10-20 |
1905-4-1 |
| QC/T 712-2004 |
汽车安全带装置固定连接用焊接螺母 |
Weld nuts for fixing the safety belt devices of vehicle |
|
1904-10-20 |
1905-4-1 |
| QC/T 713-2004 |
塑料(尼龙)用自攻螺钉螺纹 |
Tapping screws thread for plastic(nylon) |
|
1904-10-20 |
1905-4-1 |
| QC/T 714-2004 |
汽车车身覆盖件未注形状与位置公差值 |
General geometrical tolerances for cover panel of vehicle body |
|
1904-10-20 |
1905-4-1 |
| QC/T 715-2004 |
汽车用螺纹连接副磨擦系数的测试方法 |
Measuring method for friction coefficient of screw thread pair of automobiles |
|
1904-10-20 |
1905-4-1 |
| QC/T 716-2004 |
汽车密封条插入力和拔出力试验方法 |
Retention strength and insertion resistance test method for Automobile Weatherstrips |
|
1904-10-20 |
1905-4-1 |
| QC/T 717-2004 |
汽车车轮跳动量的要求和检测方法 |
Run out requirements and measuring methods of automotive wheels |
|
1904-10-20 |
1905-4-1 |
| QC/T 718-2004 |
混凝土泵车 |
Truck mounted concrete pump |
|
1904-10-20 |
1905-4-1 |
| QC/T 719-2004 |
高空作业车 |
Hydraulic aerial cage |
全部代替：GB/T 9465-1988 |
1904-10-20 |
1905-4-1 |
| QC/T 720-2004 |
汽车空调术语 |
Auto air condition vocabulary |
|
1904-10-20 |
1905-4-1 |
| QC/T 721-2004 |
汽车用锌铝铬涂层 |
Zinc/Al/Chromate Coatings for Automobiles |
|
1904-10-20 |
1905-4-1 |
| QC/T 722-2004 |
摩托车和轻便摩托车轮辋 轮廓检验方法 样板检验 |
Test method for contour of motorcycles and mopeds rims Template test |
|
1904-10-20 |
1905-4-1 |
| QC/T 723-2004 |
摩托车和轻便摩托车辐板式车轮技术要求和试验方法 |
Property requirements and test method for spoke-plate wheels of motorcycles and mopeds |
|
1904-10-20 |
1905-4-1 |
| QC/T 724-2004 |
摩托车和轻便摩托车直流信号闪光器技术条件 |
Specification for direct current flasher units of motorcycles and mopeds |
|
1904-10-20 |
1905-4-1 |
| QC/T 725-2004 |
摩托车和轻便摩托车轮辋标定直径检验方法 球带尺检验方法 |
Test method for calibrated diameter of motorcycles and mopeds rims using sphere-string ruler |
|
1904-10-20 |
1905-4-1 |
| QC/T 726-2004 |
摩托车和轻便摩托车轮辋标定直径检验方法 平带尺检验方法 |
Test method calibrated diameter of motorcycles and mopeds rims using even strap ruler |
|
1904-10-20 |
1905-4-1 |
| QC/T 515-2000 |
汽车发动机用调温器型式与尺寸 |
|
全部代替：QC/T 515-1999 |
1900-12-7 |
1901-7-1 |
| QC/T 669-2000 |
汽车空调(HFC-134a)用管接头和管件 |
|
|
1900-12-7 |
1901-7-1 |
| QC/T 670-2000 |
汽车合成制动液 |
|
|
1900-12-7 |
1901-7-1 |
| QC/T 656-2000 |
汽车空调制冷装置性能要求 |
|
全部代替：QC/T 72.1-1993 |
1900-11-6 |
1901-4-1 |
| QC/T 657-2000 |
汽车空调制冷装置试验方法 |
|
全部代替：QC/T 72.2-1993 |
1900-11-6 |
1901-4-1 |
| QC/T 659-2000 |
汽车空调(HFC-134a)用标识 |
|
|
1900-11-6 |
1901-4-1 |
| QC/T 660-2000 |
汽车空调(HFC-134a)用压缩机试验方法 |
|
|
1900-11-6 |
1901-4-1 |
| QC/T 661-2000 |
汽车空调(HFC-134a)用液气分离器 |
|
|
1900-11-6 |
1901-4-1 |
| QC/T 662-2000 |
汽车空调(HFC-134a)用贮液干燥器 |
|
|
1900-11-6 |
1901-4-1 |
| QC/T 663-2000 |
汽车空调(HFC-134a)用热力膨胀阀 |
|
|
1900-11-6 |
1901-4-1 |
| QC/T 664-2000 |
汽车空调(HFC-134a)用软管及软管组合件 |
|
|
1900-11-6 |
1901-4-1 |
| QC/T 665-2000 |
汽车空调(HFC-134a)用充注接口 |
|
|
1900-11-6 |
1901-4-1 |
| QC/T 52-2000 |
垃圾车 |
|
全部代替：QC/T 52-1993,QC/T 29112-1993 |
1900-8-15 |
1901-1-1 |
| QC/T 652-2000 |
吸污车 |
|
全部代替：GB/T 8531.1-1987,GB/T 8531.2-1987,GB/T 8531.3-1987 |
1900-8-15 |
1901-1-1 |
| QC/T 653-2000 |
运油车、加油车技术条件 |
|
全部代替：GB 9419-1988* |
1900-8-15 |
1901-1-1 |
| QC/T 299-2000 |
汽车动力转向油泵技术条件 |
|
全部代替：QC/T 299-1999,QC/T 300-1999 |
1900-7-7 |
1901-1-1 |
| QC/T 488-2000 |
汽车燃油箱盖、加油口 |
|
全部代替：QC/T 488-1999 |
1900-7-7 |
1901-1-1 |
| QC/T 529-2000 |
汽车动力转向器总成台架试验方法 |
|
全部代替：QC/T 529-1999 |
1900-7-7 |
1901-1-1 |
| QC/T 530-2000 |
汽车动力转向器总成技术条件 |
|
全部代替：QC/T 530-1999 |
1900-7-7 |
1901-1-1 |
| QC/T 644-2000 |
汽车金属燃油箱技术条件 |
|
全部代替：QC/T 29034-1991 |
1900-7-7 |
1901-1-1 |
| QC/T 646.1-2000 |
汽车粉尘密封性试验 粉尘洞法 |
|
|
1900-7-7 |
1920-1-1 |
| QC/T 647-2000 |
汽车转向万向节总成性能要求及试验方法 |
|
|
1900-7-7 |
1901-1-1 |
| QC/T 648-2000 |
汽车转向拉杆总成性能要求及试验方法 |
|
|
1900-7-7 |
1901-1-1 |
| QC/T 649-2000 |
汽车转向传动轴总成性能要求及试验方法 |
|
|
1900-7-7 |
1901-1-1 |
| QC/T 650-2000 |
汽车转向拉杆球头销性能要求及试验方法 |
|
|
1900-7-7 |
1901-1-1 |
| QC/T 651-2000 |
矿用自卸汽车整车产品质量检验评定方法 |
|
|
1900-7-7 |
1901-1-1 |
| QC/T 324-2000 |
汽车燃油空气加热器 |
|
全部代替：QC/T 324-1999,QC/T 325-1999 |
1900-1-21 |
1900-7-1 |
| QC/T 422-2000 |
机动车用硅整流二极管 |
|
全部代替：QC/T 422-1999 |
1900-1-21 |
1900-7-1 |
| QC/T 490-2000 |
汽车车身制图 |
|
全部代替：QC/T 490-1999 |
1900-1-21 |
1900-7-1 |
| QC/T 544-2000 |
汽车发动机凸轮轴技术条件 |
|
全部代替：QC/T 544-1999 |
1900-1-21 |
1900-7-1 |
| QC/T 555-2000 |
汽车、摩托车发动机 单体铸造活塞环金相标准 |
|
全部代替：QC/T 555-1999 |
1900-1-21 |
1900-7-1 |
| QC/T 632-2000 |
汽车用翘板式开关技术条件 |
|
|
1900-1-21 |
1900-7-1 |
| QC/T 636-2000 |
汽车电动玻璃升降器 |
|
|
1900-1-21 |
1900-7-1 |
| QC/T 637-2000 |
汽车发动机曲轴弯曲疲劳强度试验方法 |
|
|
1900-1-21 |
1900-7-1 |
| GB/T 4969-1985* |
万向节和传动轴名词术语 |
|
|
2024-11-18 |
2024-11-18 |
| QC/T 254-1998 |
运钞车技术条件 |
|
|
2024-11-18 |
2024-11-18 |
| QC/T 255-1998 |
运钞车防护性能试验方法 |
|
|
2024-11-18 |
2024-11-18 |
| QC/T 258-1998 |
轿车钢制车轮螺母座刚度要求及测试方法 |
|
|
2024-11-18 |
2024-11-18 |
| QC/T 280-1999 |
汽车发动机主轴瓦及连杆轴瓦技术条件 |
|
|
2024-11-18 |
1987-7-1 |
| QC/T 281-1999 |
汽车发动机轴瓦铜铅合金金相标准 |
|
|
2024-11-18 |
1999-1-1 |
| QC/T 282-1999 |
汽车发动机曲轴止推片技术条件 |
|
|
2024-11-18 |
1999-1-1 |
| QC/T 29031-1991 |
汽车发动机轴瓦电镀层技术条件 |
|
|
2024-11-18 |
1991-1-1 |
| QC/T 29033-1991 |
汽车液力变速器台架性能试验方法 |
|
|
2024-11-18 |
1991-1-1 |
| QC/T 29115-1993 |
摩托车产品质量检验规程 |
|
|
2024-11-18 |
2024-11-18 |
| QC/T 29117.10-1993 |
摩托车产品质量检验 摩托车发动机装配调整及外观质量检查评定办法 |
|
|
2024-11-18 |
2024-11-18 |
| QC/T 29117.2-1993 |
摩托车产品质量检验 整车装配调整评定办法 |
|
|
2024-11-18 |
2024-11-18 |
| QC/T 29117.3-1993 |
摩托车产品质量检验 整车外观质量评定办法 |
|
|
2024-11-18 |
2024-11-18 |
| QC/T 419-1999 |
喇叭继电器 技术条件 |
|
全部代替：ZB T36 005-1987* |
2024-11-18 |
1988-1-1 |
| QC/T 446-1999 |
鞍式牵引车牵引座 |
|
全部代替：ZB T72 001-1987* |
2024-11-18 |
1988-7-1 |
| QC/T 489-1999 |
机油散热器总成技术条件 |
|
|
2024-11-18 |
1975-1-1 |
| QC/T 501-1999 |
汽车信号闪光器技术条件 |
|
全部代替：JB 2551-1984* |
2024-11-18 |
2024-11-18 |
| QC/T 502-1999 |
汽车感应淬火零件金相检验 |
|
|
2024-11-18 |
1980-1-1 |
| QC/T 560-2010 |
散装水泥车技术条件及性能试验方法 |
Bulk-cement delivery tanker - Specifications and Methods of performance test |
全部代替：QC/T 560-1999,QC/T 561-1999 |
2024-11-18 |
2010-12-1 |
| QC/T 638-2000 |
密封垫圈 |
|
|
2024-11-18 |
2000-1-1 |
| QC/T 75-1998 |
矿用自卸汽车 定型 |
|
全部代替：QC/T 75-1993 |
2024-11-18 |
1998-1-1 |
中国汽车标准
网友评论：（只显示最新10条。评论内容只代表网友观点，与本站立场无关！）