[注：本站登载的某些文章并不代表本站支持或反对其观点或肯定其真实性]
Introduction
John Roy Robert Searl was born May 2, 1932 in a very poor family in England. He was put in foster homes and separated from his brother and sister at the age of four. At the age of four and a half years old he started having dreams. The dreams came in pairs - first dream one, then a short time later, dream two; and they occurred twice a year for six years. The dreams stopped when he was at age ten. He knew the dreams meant something, so he worked at interpreting their meaning at age ten.
At 14 he made his first Searl Effect Generator (SEG). He was financed by an elderly Welsh gentleman by the name of George Hines. Mr. Hines believed in John and financed the first six SEGs that he built, all of which were lost. The first SEG was assembled in John's house at No. S Carl Street. It was a small unit and when he completed placing the magnetic rollers on the plates, it started to go faster and faster. As the SEG speeded up, it developed a field around it, lost its gravity, flew up and hit the ceiling! John was surprised because he was trying to make a generator, not anything that would go up in the air. Meanwhile, the SEG kept hitting the ceiling until it got out and it was lost. The five subsequent ones that he built were also lost because he didn't know how to contain the field that it generated.
As Prof Searl worked, he built a total of 40 levity disks. Many of them were lost in the begin ning until he learned how to control them. When he learned how to control the SEGs, after he tested them John would disassemble them to protect the technology. He would then try to use the parts for the next generation. The last craft done was Demo 1. Unfortunately, this craft, too, has been lost.
Deaf Ears
This technology has been offered to all countries. Back in the 70's, Professor Searl, a patriot, went to his country first. He went to the Queen and the Prince and said, "Would you take this, I can show you how to build this device to generate power and to actually make a new type of spacecraft or just flying craft to take the place of airplanes." They didn't want to see him. They thanked him very much. He has letters to that effect.
He has offered it to the United States. He gave a demonstration at Edwards Air Force Base. During the demonstration, he made a remote control turn to the tune of 25 Gs, which would kill anyone inside a jet plane. The people at Edwards said, "Well that would kill anybody inside a jet plane, and we don't want to see it, because it's just too dangerous, we can't use that."
Puzzled, he did a number of subsequent tests to determine internal G-forces. One which was fool proof. It had a vial of a radioactive element suspended in the apparatus that would break with a 2G force placed on it in any one place. He sent his craft up with that in place, and made all kinds of turns that should have just smashed it. When it came back, he tested it and it was still intact.
This demonstrated that the relativity inside this craft is not the same as the relativity that we ordinarily experience in standard aircraft.
In 1989, he offered this technology to Munich, Germany and to a group of scientists who received a grant to work on this technology. It's a research and developmentnot manufactur inggrant to build a model so the SEG effect can be demonstrated. The manufacturing con tract has not been let out. Manufacturing contracts will be discussed when we have the offers in place and we can talk to investors, showing the device in action.
Professor Searl always had the device with him at all his lecturesthis allowed him to demon strate the SEG. They are all now destroyed except for two which have been given to people for health reasons. Two different individuals who were diagnosed as having lung ailments and only a matter of months to live. One of the benefits of this device is that it produces tremen dous ion discharge. An electron discharge has the effect of healing. It will heal people's lungs and also has the benefit of ion production.
Professor Searl had been in an accident in which he was carrying a very hot pan of oil that was put on the stove mistakenly and he was trying to get it outside. Someone opened the door unexpectedly
and it exploded. John was not only burned, but he was also bleeding. Fourteen days later you couldn't see a scar. So the SEG may have a healing effect.
Basic Structure of the SEG
An SEG consists of a series of three rings and rollers that go around those rings. The first ring contains twelve rollers, this amount is the same as having a twelve-cycle or twelve-phase linear motor. A linear motor will not operate on less than twelve phases. There are many other correlations you can make, but this is working along with the laws of Nature. There are twelve plates on the surface of the earth, and twelve months of the year. There can be more than twelve rollers, but no less.
Figure 1 is an illustration of what an SEG would look like. It shows what we hope our final outcome will be to make one. You notice that there are three rows as you go out. There are not the same number of rollers for each ring . It goes up by approximately 10 rollers for each ring.
All of the construction details are based on the Law of the Squares. Looking at a cutaway section of a ring of rollers, we see that this SEG is made using the square of four. The rollers revolve around the plates that form the rings, but they do not touch them. The close-up of the roller in Figure 2 shows a center element and then three other elements going out from the central core of each roller. The plates will have the same center element on the inner side and the lightest element on the outside.
Figure 3 is a drawing of the elements going from the outside layer to the inside layer. It shows dimensions and you'll notice that one of the elements is nylon. Nylon 66 is the element Prof. Searl chose to use and he used it because it has a high negative content and it also has a double bond configuration. The nylon is used as a semi-conductor in a diode.
What you have basically is a solid state device here. Figure 4. The electrons are given off from the center element (which is neodymium), and they travel out through the other elements. If the nylon had not been put there, the SEG would act like a laser and one pulse would go out and it would stop, build up, and another pulse would go out. But, with the nylon in there, the nylon acts as a control gate, and that control gate gives you an even flow of electrons throughout the SEG.
Brushes for electron pickups are found on the outside edges of SEGs designated for use in the Inverse-G vehicles. Figure 5. A set of conventional C-shaped transformers would ordinarily collect the energy for use. The Inverse-G vehicle units are made a little bit different than a conventional generator in that instead of supplying 240 volts for Europe or 130 for the United States, it puts out hundreds of millions of volts. In order to transfer that energy to a usable place on the craft, and to direct it they pick it up with brushes. These brushes are positioned all around the out side.
The Impressed Magnetic Fields
The rollers have a primary north and south pole, as do the plates in this case. There's a primary north and south pole on the rollers and a primary north and south pole on the plates. Obviously you will have the north pole of the roller attracted to the south pole of the plate.
Ordinarily they would clamp right on and not be able to move, especially being made with neodymium. But there's a secondary field impressed on these magnets using an AC compo nent. By impressing an AC magnetic field on the roller, Prof. Searl was able to create the demonstration in Figure 6 using a bar and two rollers. The rollers would go completely around the bar even around the 90 degee angle becuse of the way the fields was impressed on the magnets.
This shows the field when you make these magnets you have to use an AC component to influence the DC field. What it does, it warps it and they go on at the same time when you're turning this magnet. As the field is warped, multiple poles are formed on the surface of the rollers and on the rings of the SEG. The frequency used to do this is not the same on the rollers as it is on the rings. This creates a non unity between the two faces so that as the magnets try to achieve unity and go to a north-south orientation, they cannot do it.
The imprinting is being done in Germany. Figure 7. One of the most difficult things in making this device is to impress the magnetic lines and cool it without cracking. Coils are used to print the magnetic lines by first suppressing the existing fields, then generating the impressed field, and finally to cool the finished component. Oscilloscopes are used to monitor the printed wave form. Figure 8.
When the finished rollers are placed underneath some iron filings on paper, like at school, we get some unusual results. . . a large pattern on each pole, and almost no pattern or an angular pattern in an arc between poles . There are both layers and individual poles and this uniformity of the poles on the outside is very important. These magnetic poles will be their own prime mover.
One of the marvelous things about the SEG is that none of the parts touch. There is no friction whatsoever, the rollers float on the magnetic field because of the AC component that has been impressed upon them. They will not fly off because of the DC that has been impressed upon them. They travel around the first ring at about 250 mph. In each ring going outward, the rollers' speed in creases by 2 and a half times.
Element Selection
Now, the choosing of the elements is an important thing obviously. If one was to look at the Table of Periodic Properties of the Elements, one would notice that the atomic structure of each element is illustrated. Prof Searl discovered that most of the elements that worked the best were hexagonal, but iron is obviously not so. He uses them in conjunction with the hex agonal configuration in order to pick the correct and most efficient way to develop the effect.
The specific powders of elements are carefully weighed. These elements have to be of a specific grain size, atomic weight, and exact dimensions. They have to be put together in such a way that they meet the requirements of the Law of Squares.
The elements are used on the theory that when they progress out from the center or inside out they are at lessor weight, atomically... And these elements are made and chosen through the Law of the Squares, with the heaviest element as the center element. The center element that John Searl has used since the first SEG is neodymium, which is element number 60. Modern science has just discovered that neodymium is good to make magnets. John Searl has been using it since 1946!
Law of the Squares
A lot of people ask what is all this about the squares? Well, there are three groups of squares group one, two and three, and there can be no other. Group one squares consists of all odd numbers. All even numbers that are divisible by four are Group Two. All the rest of the even numbers not divisible by four are Group Three.
In the books, John Searl will mention that a Group 1 square rotates, I couldn't understand that so I did a little research and studying on my own and I found that if you take the numbers of Group One and show where it moves to in his corrected square, it will go to this point here, and this number will go here. This pattern develops out and it's a circular pattern showing a rotation.
When you do something similar in showing where the numbers transpose to what we call a uniform square which would be a sequentially numbered square from top to bottom, left to right. In those squares, all of the numbers in a line if you add them across or down or on a diagonal will add to the same number. All have the same line value. These have been termed Magic Squares in the past. It's not really a new technology but an old technology that's being reborn and reviewed.
In Figure 9, I have illustrated the three groups. The oscillating pattern of a Group 2 square took me some time. I went further on with this in my studies and I said well OK I have to picture this in my mind. I really couldn't quite get it., the gist of it. What I did was extrapo lated a Group 2 square out into a cube and the opened the cube up.
When I first started, I thought there had to be one answer if I could find a way to solve this square, take sequentially numbered squares and put them into an order where every line would add to the same value. And all these different directions would only be one answer.
I was wrong. Figure 10 , Figure 11 is the front view, back and top and bottom of this cube. And every one of these lines add up to the same number in every one of these squares, so I kind of surprised myself doing that. This is a three-dimensional image of that cube.
Now, even at that what does that show you? Starting with this cube I found that there's a switching pattern involved and I could equate the switching pattern of the squares to the switching pattern I saw in the cube which brought to me a three dimensional realm. I could easily make the jump to a switching pattern in the atomic valences or atomic structure.
The Secret of Control
The initial working models were not remote controlled. They were one-time shots John de scribed as firecracker models. Once he started them, they took offnever to be seen again! Prof. Searl says "it's an awfully expensive firecracker! " I imagine they were. Then he learned how to control it.
Prof. Searl was giving a news interview and the people were there with the video cameras and the press and he said ...Now this device will never stop. No matter what you do it will never stop. And it will always supply you with power.
And so the video camera came down and panned down real close to the SEG and the SEG stopped! John further describes the moment: My mouth fell open and I felt like a fool because
I'd just finished telling them it would never stop.
He'd never seen it stop before. What happened was very embarrassing, but it was one of the luckiest things that ever happened to him. He realized immediately that the key was in the frequency and that the frequency of the television camera was putting out a harmonic or a resonant frequency of the primary frequency of the SEG and it counteracted it and caused the poles to reach a unification state and stop.
And so that is how he got the key on how to control the SEG. Through a remote control he could now slow it or stop it entirely. Up to this point he was not stopping it.
The Dream Lost
A good number of models in various sizes were built and flown. Of course, this work attracted a lot of visitors. John would have anyone who wanted to view his craft, the generator or view the craft in flight to sign in and put a little comment about what they thought. There were many famous people and there were hundreds of namesthey were not retrieved. They're all lostburned in the fire.
Prof. Searl wanted to fly one of the models himself. He was about ready to . Friends in New Zealand had committed money to build a three-man craft and were all set to go. Land had been cleared and they were all set to start construction. One of his motivations is that when he went to a number of test pilots and showed them models of flight, they all looked at the high G factors and the high voltage and then refused to fly of it.
So John proceeded to go and take flight school. He did take flight school to the point that he was qualified to take passengers. Which, if you know anything about flying, it's a lot more than getting your Piper Cub license. He accomplished this just before he was arrested.
While under persecution, John had to leave his largest model unattended for a lengthy period. Prof. Searl went back to retrieve it, I think it was about six months ago now, and he said that when he left it there, it was supposedly safe. Unfortunately, the person that let him use the land died and his wife sold off the land. The new owner, a policeman, sold it for junk.
So it was very disappointing. It had tons of copper - about five tons of copper . But it was sold just for the copper. It was pitiful because it was the only thing he had left to show his work - everything else was destroyed. Even photos are very hard to come by. They come in little trickles, from different people who have worked on it. There's not much publicity and most of it has been destroyed.
Recovering the Dream
Various people throughout history have claimed to have generated what the scientific commu nity calls Free Energy. And many of them have claimed to have produced anti-gravity devices and craft. To day, most of them are dead. We're trying to retrace their endeavors to rediscover their technology. Most of these inventors were very secretive so that their inventions would not be stolen, or fall into the wrong hands. All of their motives are understand able. The result was that their technology and inventions were lost. They were so afraid that someone would try to steal it, or that it would get into the wrong hands. Now, no one has it.
Some of these great inventors were, in my opinion, Nikola Tesla, John Keely, Victor Schauberger, Otis Carr, and there are probably a number of them I don't know about. I'm getting in contact every day with people who have devices that they say work. Prof. Searl has kept many aspects of his technology secret in the past for the same reasons. He was wrong fully imprisoned and all of his equipment and papers were destroyed, as I've told you about. This was almost the end of the Searl technology.
But John Searl is not to be stopped. He's very strong-willed and dedicated to using his tech nology to make a better world for mankind. He's released this work in the form of books entitled "The Law of the Squares." so that it will not be destroyed again.
I've asked people:
How much would you give to talk to Nikola Tesla, to be able to talk to your specific interest Guru or leader?
I'd give a lot to talk to Tesla, to Keely or to many others. What marvelous inventions could they come up with in light of our modern discoveries? Take Tesla today and show him the transistor; what do you think he'd come up with in view of what he came up with in the past.
Did Keely really conquer gravity using sound waves through sympathetic vibrations? Did Schauberger really create a gravity field using vortexian action in liquids? Did Carr have special windings in his craft that allowed him to generate voltage needed for anti-gravity? These questions may never be answered except by diligent research and experimentation. Even then it may take years.
Prof. Searl is alive today. He wants to give this technology to the world today. Will we wait too long to accept it? Will we waste our time scoffing to disprove his technology as has been done by others in the past? Will we turn a blind eye to his attempt to move us into the future as we did to Tesla so that we can hold on to the past?
I say we don't turn a blind eye. We're looking for the visionaries of today to move ahead now in order to save the people of this planet. Figure 12. We no longer have the luxury of saying someday somebody else will do it. We've damaged our atmosphere severely. We've depleted our natural resources. We're cutting down our rain forests, at an alarming rate. We all hear about these things and feel we can do nothing about them.
We can do something about them now, though, if we act before its too late and get this tech nology going. There's a very minuscule amount of time, as we look at the big picture of the earth and we've almost ruined the atmosphere. Some cities are almost unlivable because of the smog. This technology could do something about that. That's why I'm involved with it.
google译文:
导言
约翰罗伯特塞尔罗伊生于1932年5月2日在一个非常贫困的家庭在英格兰。他是在寄养家庭和失散从他的弟弟和妹妹在4岁。在4岁半岁，他开始有梦。梦想是在对-第一的梦想之一，那么短的时间后，两个梦想;和它们发生，每年两次为6年。停止的梦想是当他10岁。他知道，梦想意味着什么，所以他在解释其含义在10岁以下。
14日，他在他第一次塞尔效果发生器（赛格）。他的经费是由老人威尔士绅士的名字叫乔治海因斯。海因斯先生认为约翰和资助上半年SEGs ，他建造，所有这些都是损失。第一赛格是聚集在约翰的家在第语卡尔街。这是一个小单位，当他完成了把磁辊上的盘子，开始去快。由于赛格加快，它制定了一个外地周围，失去了重力，飞行和击中天花板！约翰很惊讶，因为他试图使一台发电机，而不是任何会在空气中。与此同时，赛格不断触及天花板，直到失控并丧失。五其后，他还建造了，因为他不知道如何控制领域，它产生的。
正如塞尔教授的工作，他建立了一个共有40个轻率的磁盘。他们中的许多人失去了在宁开始，直到他学会了如何控制它们。当他得知如何控制SEGs后，他约翰测试他们将拆卸，以保护他们的技术。然后，他将尝试使用部分为下一代。最后做的是飞行器演示1 。不幸的是，这一工艺，也已丢失。
充耳不闻
这种技术已被提供给所有国家。早在70 年代，塞尔教授，一个爱国者，他对他的国家第一次。他走到女王和王储说， “请问你可否，我可以告诉您如何建立这一装置来发电，并实际上使一种新型的航天器或飞行船取代的飞机。 ”他们不想见他。他们感谢他非常感谢。他曾写信给这效果。
他表示愿意到美国。他给了示威的爱德华兹空军基地。在示威期间，他提出了远程控制转向调整为25气孔，这将杀死任何人在一个喷气式飞机。人们在爱德华兹说， “嗯将杀害任何人在一个喷气客机，我们不想看到它，因为它实在太危险，我们不能使用这一点。 ”
困惑，但他的一些后继测试，以确定内部国部队。这是一个傻瓜的证据。它一小瓶放射性元素暂停机制，将打破以武力的2G它放在任何一个地方。他派他的船同在的地方，并提出各种轮流应当刚才打碎它。当它回来了，他测试它，它仍然完好无损。
这表明在这个相对工艺是不一样的相对论，我们通常的经验标准的飞机。
1989年，他提出这方面的技术，慕尼黑，德国和一群科学家谁收到了补助金的工作这项技术。这是一种研究developmentnot制造和 inggrant建立的模型，以便凹陷效果可以证明。生产控制系统尚未租出。制造合同将讨论时，我们有提供到位，我们可以与投资者，显示装置的行动。
教授塞尔总是与他的设备在他的所有lecturesthis让他恶魔的赛格策略。他们现在都摧毁了除两个已考虑到人民的健康原因。两种不同的个人谁被诊断患有肺病，只有几个月的生活。的好处之一是这个装置，它产生tremen dous离子放电。电子放电的影响愈合。它将治愈人的肺部，也有利于离子生产。
塞尔教授已在事故中，他携带了非常炎热的泛石油是放在炉灶错误，他正试图得到外面。有人开门意外
它爆炸了。约翰不仅是烧伤，但他也出血。 14天后你不能看到一道深深的伤疤。因此，赛格可能有治疗效果。
基本结构赛格
一位赛格包括一系列的三个环，轧辊是去围绕这些戒指。第一个包含12个环辊，这一数额是相同的有12个周期或十二相直线电机。线性电机不会运作不到十二个月的阶段。还有许多其他相关可以，但是这是一起工作的法律性质。有12片表面上的泥土，和十二个月的一年。不能有超过12辊，但没有减少。
图1是一个说明什么是赛格将样子。它表明我们希望我们的最后结果将作出一个。您的通知，有三排你出去。有没有相同数量的轧辊为每个环。不言而喻了大约10辊为每个环。
所有的建筑的细节是根据法方。看着剖部分的辊环，我们看到，这是赛格使用面积4 。该辊围绕板块，形成了环，但他们不碰他们。在近距离的辊图2显示一个中心内容，然后其他三个要素走出去的核心每个辊。该板块将有同样的中心内容的内侧和重量最轻的元素在外面。
图3是图的内容会从外面层内层。这表明尺寸和你会发现的要素之一是尼龙。尼龙66是要素教授塞尔选择使用，他使用它，因为它具有较高的消极内容和它也有双键的配置。尼龙作为一种半导体在一个二极管。
你基本上是一种固态装置在这里。图4 。电子得到了从中央元（这是钕），他们通过旅行的其他内容。如果尼龙尚未付诸那里，赛格将采取行动像一个激光脉冲将一个走出去，将停止，建立，另一个脉冲将出去。但是，与在那里的尼龙，尼龙作为一个控制闸门，并控制闸门让您甚至电子流在整个赛格。
刷电子皮卡车被发现在外面的边缘SEGs指定用于逆荷车辆。图5 。一套传统的C型变压器通常会收集的能源使用。逆荷车辆单位发了一点不同比传统发电机，而是提供240伏特的欧洲或130对美国来说，它提出了数百万伏特。为了转移，能源的使用上发生船只，并指示它，他们捡起来的刷子。这些刷子的位置各地的一方。
在深刻的印象磁场
该轧辊主要有南北极，因为这样做板在这种情况下。有一个小学南北极的辊和一个主要南北极的板块。显然，你将有北极的辊吸引到南极板。
通常他们将钳上的权利，而不是可以移动，尤其是正在取得钕。但有一个次要领域的深刻的印象就这些磁体使用的是交流复合组件。留下深刻印象的交流磁场对辊，教授塞尔能够创建示范图6使用的是酒吧和两个滚轮。该轧辊将完全在酒吧甚至在90 degee角becuse的方式，领域留下了深刻的印象的磁铁。
这表明，外地当你让这些磁体您必须使用交流电的组成部分，影响直流领域。什么这样做，扭曲和他们去上在同一时间当你把这个磁铁。由于是扭曲的领域，多极的形成表面上的辊和吊环的赛格。使用的频率做到这一点是不一样的滚轮，因为它是吊环。这将创建一个非之间的团结两副面孔，以便作为磁体努力实现团结和前往南北方向，他们不能做到这一点。
的印记是在德国。图7 。其中最困难的事情，使这个装置是留下深刻印象的磁力线和冷静它不开裂。线圈是用来打印磁力线，首先制止现有的领域，然后产生深刻的印象领域，并最终完成凉爽的组成部分。示波器是用于监测印刷波的形式。图8 。
当成品辊放在下面一些铁屑在纸面上，像在学校里，我们得到一些不寻常的结果。 。 。一个大格局的每一个杆位，而且几乎没有任何模式或一个角格局的一个弧形两极之间。有两个层次和个人极点，这统一的两极在外面是非常重要的。这些磁极将自己的主要推动者。
一个了不起的事情了赛格的是，没有任何部分接触。没有任何摩擦，浮动的轧辊上的磁场，因为交流组成部分，已对他们留下深刻的印象。它们不会飞走，因为在DC已经给他们留下深刻的印象。他们游览的第一环约250公里。在每个环走出去的滚轮的速度在折痕的2和1.5倍。
元素的选择
现在，选择的内容是一个重要的事情明显。如果是看表的周期性质的元素，人们会发现，原子结构的每个元素说明。塞尔教授发现，大多数的工作内容，最好是六角形，但铁显然是并非如此。他利用它们与十六进位濒死的配置，以便选择正确的和最有效的方式发展的影响。
粉末的具体内容是认真权衡。这些内容都必须具体的晶粒尺寸，原子重量，尺寸精确。他们必须把这种方式符合法律规定的平方。
的内容上使用的理论，当他们的进展，从中心或内部出他们是在出租人重量，原子...和这些因素都选择了和通过法律的平方，最重元素为中心的要素。该中心的因素，约翰塞尔使用了自第一次赛格是钕，这是一些60元。现代科学刚刚发现，钕是好的，使磁铁。约翰塞尔一直使用它自1946年以来！
法方
很多人问什么是这一切的广场？那么，有三个群体的平方组一，二，三名，并就不可能有其他。第一组方的所有奇数。所有的偶数是可分的四个第二组。所有其余的偶数不能整除4个3组。
在书籍，约翰塞尔将提到，一组1平方米旋转，我无法理解，所以我作了一个小小的研究，研究我自己的，我发现，如果你的数量第一组，并显示在它采取行动在他的纠正平方米，将前往这一点在这里，这个数字将进入这里。这种模式发展了，这是一个循环模式显示轮换。
当你做一些类似的地方，显示的数字移我们称之为统一平方米这将是一个顺序编号平方米从上到下，从左到右。在这些广场，所有的数字一条线如果加上他们越过或下降或对角线将增加相同数量。所有国家都在同一行的价值。这些被称为幻方在过去。这不是一个真正的新技术，但一个老技术，被新生和审查。
在图9 ，我已经证明了三组。振荡模式的一组2平方米我花了一些时间。我去进一步与我的研究和我说也行我要图片这在我的脑海。我真的不能完全得到它。 ，精神的。我所做的是extrapo lated一组2平方米到一个立方体和开放的立方体了。
当我第一次开始，我觉得必须有一个答案如果我能找到一种办法来解决这个广场，采取顺序编号广场和付诸命令在每行会增加相同的值。所有这些不同的方向只会有一个答案。
我错了。图10 ，图11是正面观，背部及顶部和底部的这个立方体。每一个这些线路增加相同数量的每一个这些广场，所以我的惊讶自己这样做。这是一个三维图像的立方体。
现在，即使在什么，表明你吗？从这个立方体，我发现有一个开关模式参与，我可以等同于交换模式的平方的开关模式我看到的立方体这给我带来了三维领域。我可以很容易使跳到开关格局价态原子或原子结构。
这个秘密的控制
最初的工作模式并没有远程控制。他们一次性投约翰德萨兰抄的鞭炮模型。一旦他开始，他们采取了offnever将再次看到！教授塞尔说： “这是一个非常昂贵的鞭炮！ ”我想他们。然后，他学会了如何控制它。
塞尔教授是使新闻采访和人民在那里的摄像机和记者，他说...现在，这个装置将永远不会停止。不管你怎么做它永远不会停止。它将永远为你提供电力。
因此，摄像头下来，并批评了真正的接近赛格和赛格停止！约翰进一步说明的时刻：我的嘴下跌开放，我感觉像一个傻瓜，因为
我想刚刚告诉他们这将永不会停止。
他从来没有看到它停止之前。发生的事情是非常尴尬的，但它是一个幸运的事情都发生在他。他立即实现，关键是在频率和频率的电视摄像机放在了谐波或共振频率的主要频率段，并抵消它，并造成了极达成一个统一的状态，并停止。
所以这就是他的关键就如何控制赛格。通过一个遥控器，他现在可以缓慢或完全停止。至此，他没有阻止它。
失落的梦
一个很好的一些模型，大大小小的建造和飞行。当然，这项工作吸引了众多的游客。约翰任何人都会想谁认为他的船，发电机或查看飞行器在飞行中登录并提出一些意见对他们思想。有许多著名的人，有数以百计的namesthey没有收回。他们都lostburned火灾。
教授塞尔想飞往一个自己的模式。他的准备。朋友在新西兰已承诺资金建立一个三人工艺和设置都去。土地已被清理，他们都将开始建设。他的动机是，当他到了一些测试飞行员和模型表明它们的飞行，他们都期待在高G因素和高电压，然后拒绝飞行的。
因此，约翰接着去飞行学校。他没有采取飞行学校到如此地步，他是合格的，接载乘客。其中，如果您知道什么飞行，这是一个很大越来越多的胡椒幼童许可证。他完成之前，这只是他被逮捕。
虽然迫害下，约翰不得不离开他最大的无人值守模式的一个漫长的时期。教授塞尔回去找回它，我认为这是大约六个月前现在，他说，当他离开那里，它被认为是安全的。不幸的是，人，让他使用土地死亡和他的妻子卖掉了土地。新的主人，一名警察，出售它的垃圾。
所以这是非常令人失望。它吨铜-约5吨铜。但仅售出的铜。这是可怜的，因为它是唯一的他已离开表现出他的工作-一切被摧毁。即使照片是非常来之不易。他们来到在小口，来自不同的人谁拥有它的工作。有没有太多的宣传和大部分已被摧毁。
回收的梦
不同的人在整个历史都声称自己产生了什么科学社区群落呼吁自由能。其中许多人声称他们生产的反引力的设备和工艺。要一天，其中大部分已经死亡。我们正试图追溯他们的努力重新找回自己的技术。大多数这些发明者是非常隐秘，使他们的发明将不被盗窃，或落入坏人之手。所有的动机是可以理解。其结果是，他们的技术和发明遗失。他们是如此害怕，有人将设法窃取，或将进入不法分子手中。现在，任何人都它。
其中有些是伟大的发明家，在我看来，尼古拉特斯拉，约翰Keely ，维克多Schauberger ，奥的斯卡尔，并可能有一些人我不知道。我要在每天接触的人谁有设备，他们说的工作。教授塞尔一直保持许多方面他的技术秘密在过去出于同样的原因。他是完全错误的监禁和他所有的设备和文件被摧毁，因为我告诉你。这几乎是最后的塞尔技术。
但是，约翰塞尔是不能停止。他非常坚强的意志，并致力于利用自己的科技学做出一个更美好的世界人类。他发表这一工作形式的书籍题为“法方。 ”这样才不会被摧毁了。
我问人：
多少钱你能给交谈尼古拉特斯拉，能够交谈您的具体利益宗师或领导人？
我想放弃了很多交谈的特斯拉，以Keely或其他许多人。是什么了不起的发明，他们可以拿出根据我们现代的发现？今天采取特斯拉，并显示他的晶体管;你觉得他会拿出鉴于他想出了过去。
没有真正征服Keely利用重力通过声波振动同情？ Schauberger没有真正建立一个重力场使用vortexian行动的液体？卡尔也有特殊的线圈在他的船，使他产生电压所需的反引力？这些问题可能永远不会回答除了勤于研究和实验。即使到那时它可能需要几年的时间。
教授塞尔是今天还活着。他想放弃这方面的技术，今天的世界。我们等待太久接受呢？我们浪费我们的时间不屑一顾反驳他的技术已经由他人做在过去的？我们会视而不见，他试图使我们的未来，我们所做的特斯拉，以使我们能够保持过去的？
我说我们不会视而不见。我们正在寻找的幻想今天向前迈进，现在为了节省人民的这个星球。图12 。我们不再奢侈的话说有一天别人会做到这一点。我们已经破坏我们的气氛严重。我们已经耗尽我们的自然资源。我们正在削减我们的热带雨林，以惊人的速度。我们都知道这些事情，觉得我们可以做什么了。
我们可以做些什么，现在，不过，如果我们采取行动之前，为时已晚，并获得这一技术学去。有一个非常微不足道的大量的时间，因为我们要从大局的地球，我们已经几乎毁了的气氛。一些城市几乎不能生活，因为烟雾。这项技术可以有所作为的。这就是为什么我参与了它 |
|
约翰罗伯特瑟尔罗伊与瑟尔效应
网友评论：（只显示最新10条。评论内容只代表网友观点，与本站立场无关！）