ABAQUS用户子程序一览表 ABAQUS/Standard subroutines:
--------------------------------------------------------------------------------
CREEP: Define time-dependent, viscoplastic behavior (creep and swelling). 定义和时间相关的、粘塑性的运动(蠕变和膨胀) DFLOW: Define nonuniform pore fluid velocity in a consolidation analysis. 在压实分析中,定义非均匀孔隙流速度 DFLUX: Define nonuniform distributed flux in a heat transfer or mass diffusion analysis. 在热传递和质量扩散分析中,定义非均匀的分布流量 DISP: Specify prescribed boundary conditions. 指定规定的边界条件 DLOAD: Specify nonuniform distributed loads. 指定非均匀的分布荷载 FILM: Define nonuniform film coefficient and associated sink temperatures for heat transfer analysis. 对热传递分析指定非均匀的膜层散热系数和联合的散热器温度 FLOW: Define nonuniform seepage coefficient and associated sink pore pressure for consolidation analysis. 对压实分析定义非均匀的渗流系数和渗入孔隙压力 FRIC: Define frictional behavior for contact surfaces. 对接触面定义摩擦 GAPCON: Define conductance between contact surfaces or nodes in a fully coupled temperature-displacement analysis or pure heat transfer analysis. 在一个完全耦合的温度—置换分析或者是纯热传递分析中,定义接触面或节点间的导热系数。 GAPELECTR: Define electrical conductance between surfaces in a coupled thermal-electrical analysis. 在耦合热电分析中,定义表面间的导电系数 HARDINI: Define initial equivalent plastic strain and initial backstress tensor. 定义初始等效应变和初始反应力张量 HETVAL: Provide internal heat generation in heat transfer analysis. 在热传递分析中提供初始热 MPC: Define multi-point constraints. 定义多点约束 ORIENT: Provide an orientation for defining local material directions or local directions for kinematic coupling constraints or local rigid body directions for inertia relief. 为定义局部材料方向提供定位;运动学耦合约束的局部方向;惯性释放的局部刚体方向。 RSURFU: Define a rigid surface. 定义一个刚性面 SDVINI: Define initial solution-dependent state variable fields. 定义初始和结果相关的变量场 SIGINI: Define an initial stress field. 定义初始应力场 UCORR: Define cross-correlation properties for random response loading. 为随机相应荷载定义互相关属性 UEL: Define an element. 定义单元 UEXPAN: Define incremental thermal strains. 定义增加的热应变 UEXTERNALDB: Manage user-defined external databases and calculate model-independent history information. 管理用户定义的外部数据和计算与模型无关的历史资料。 UFIELD: Specify predefined field variables. 指定预定义的场变量 UFLUID: Define fluid density and fluid compliance for hydrostatic fluid elements. 为静水力学流体单元定义流体密度和流体柔量。 UGENS: Define the mechanical behavior of a shell section. 定义一个壳截面的机械运动 UHARD: Define the yield surface size and hardening parameters for isotropic plasticity or combined hardening models. 在等方性塑性或者组合硬化模型中,定义屈服面尺寸和硬化系数 UHYPEL: Define a hypoelastic stress-strain relation. 定义一个次弹性的应力应变关系 UHYPER: Define a hyperelastic material. 定义一个超弹性材料 UINTER: Define surface interaction behavior for contact surfaces. 为接触面定义表面相互作用 UMASFL: Specify prescribed mass flow rate conditions for a convection/diffusion heat transfer analysis. 在对流\扩散热传递分析中,指定规定的质量流动比条件 UMAT: Define a material’s mechanical behavior 定义材料的机械运动 UMATHT: Define a material’s thermal behavior. 定义材料的热运动 UMESHMOTION: Specify mesh motion constraints during adaptive meshing. 在适应的网格划分中,指定网格运动约束 UMOTION: Specify motions during cavity radiation heat transfer analysis or steady-state transport analysis. 在辐射热传递分析或稳态传输分析中,指定运动 UMULLINS: Define damage variable for the Mullins effect material model. 对马林斯效应材料模型定义损伤变量 UPOREP: Define initial fluid pore pressure. 定义初始孔隙流压力 UPRESS: Specify prescribed equivalent pressure stress conditions. 指定规定的换算压应力条件 UPSD: Define the frequency dependence for random response loading. 对随即响应荷载定义频率相关 URDFIL: Read the results file. 读取结果文件 USDFLD: Redefine field variables at a material point. 再一次定义材料场变量 UTEMP: Specify prescribed temperatures. 指定规定的温度 UTRACLOAD: Specify nonuniform traction loads. 指定非均匀牵引荷载 UTRS: Define a reduced time shift function for a viscoelastic material. 对粘弹性材料定义一个简化的时间转换函数 UVARM: Generate element output. 形成单元输出 UWAVE: Define wave kinematics for an ABAQUS/Aqua analysis. 对ABAQUS/AQUA分析定义波浪运 VOIDRI: Define initial void ratios. 定义初始孔隙比
-------------------------------------------------------------------------------- ## ABAQUS/Explicit subroutines VDLOAD: Specify nonuniform distributed loads. 指定非均匀的分布荷载 VFRIC: Define frictional behavior for contact surfaces. 对接触面定义摩擦 VUINTER: Define the interaction between contact surfaces. 在接触面之间定义相互作用 VUMAT: Define material behavior. 定义材料特性
--------------------------------------------------------------------------------
Refence 1.《基于ABAQUS的有限元分析和应用》,庄茁、由小川等 , 清华大学出版社 2.《ABAQUSA有限元分析–从入门到精通》, 刘展、钱英莉 ,人民邮电出版社 3.《浅谈ABAQUS用户子程序》,李青 清华大学工程力学系 4.《ABAQUS_Fortran二次开发》,百度文库xueni408上传文章(找不到原文出处,在此备注) 5.《Abaqus二次开发高级专题》,百度文库54yiwei上传 6.《ABAQUS二次开发基础》,百度文库千山暮雪婷上传
资料:《ABAQUS用户子入门实例》
|